Categories

Best 3 axis Horizontal Machining Center

Artcast

  • ...monopod and other devices with 1/4 inch or 3/8 inch screw, or standard clamp, it is flexible and stable.
  • QR plate with standard 1/4inch screw and anti-slip rubber pad, it is easy to install your camera and keep it safe (Max Load 22 Pounds).
  • VERTICAL 360 DEGREE ROTATION: Composed of 3 independently adjustable boards (horizontal board, vertical board, camera loading board). The built-in stainless steel teeth disc locking design on the vertical board can be adjusted vertically 360 degrees.
  • HORIZONTAL 360 DEGREE ROTATION: Ball head on the horizontal supports 360 degree panning movement with calibrated precision for capturing panoramic overlapping images in horizontal direction. 5 different degree stop increments: 15°/ 30°/ 45°/ 60°/ 90°, stops around n24/ n12/ n8 / n6/ n4. It does not need to look down at the scale when shooting.
  • PLEASE NOTE: Please adjust the position of your camera lens before shooting: The lens node (lens optical center) must be adjusted to coincide with the axis centre of the vertical board and the horizontal board.
  • So the camera’s shooting node can be around a fixed point in 3D space and then the image captured by the camera can be pieced together using a software. Please refer to the picture for the adjustment method.
Check Stock

Outlaw Racing Rear Billet CNC Axle Blocks Compatible with Yamaha YZ250F 2012-2020| YZ450F 2010-2020 (Blue)

  • Product designed/tested/approved in France by pro racers..
  • Machined 7075 Aluminium billet on a 5-Axis machining center..
Check Stock

FeiyuTech SCORP-C Camera Stabilizer 3-Axis Handheld Gimbal for DSLR and Mirrorless Cameras Fits Sony Canon Panasonic Nikon Fujifilm Max 5.51lbs Integrated Handle Button

  • ... with fast charging support 18W fast charging enables an extra 30 minutes runtime in just 5 minutes..
  • 【Aileron Bracket】The special design aileron bracket of the gimbal is suitable for temporarily placing the gimbal. (When the gimbal needs to be balanced, you need to use a tripod to keep your camera in a straight horizontal line.).
  • 【Innovative Design】You can realize the stabilization features like different working mode, inception mode, selfie mode, portait mode, timelapse etc.The Integrated gimbal handle arm Whether shooting upright or underslung, get complete control of the lens from whichever angle you are filming..
Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

  • Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
  • High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
  • Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
  • High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
  • Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

Low Profile Ball Head 36mm Stability Panoramic Tripod Head 360 Rotating Professional Metal Ballhead with 1/4 inch QR Plate for DSLR Cameras Tripods Monopods Camcorder Slider Max Loading 33lbs/15kg

  • ...s diameter is 36mm, CNC super machining, multi Anodized Surface treatment with the lighter weight, the smoother hand feel, more stronger loading capacity and more excellent durability. Knob anti-lost design lets you no longer have a risk of losing the knob..
  • 【PRECISION ADJUSTMENT PANORAMIC BALLHEAD】: 360 degree horizontal rotation panoramic head, double locking knob design, Especially the ergonomic main knob ，Flexible and Effortless operation.
  • Scale on the pan and bottom for panoramic shoots. Built in dual bubble level indicators: Aiming and horizon leveling, can be accomplished as one instinctive motion.convenient for photographers to take panoramic photos in landscape photography and create magnificent panoramic works..
  • 【WIDE APPLICATION FREE ROTATION BALL HEAD】: There is 1 U-shaped notches on the main body of the ball head, so you can easily switch into vertical shooting from horizontal. You can use this ball head with tripod, monopod,camera slider or mini tripod,for installing camera,Camcorder,DV, mobile phone, telescope..
  • 【WIDE COMPATIBILITY ARCA QUICK RELEASE PLATE】: Equipped with 1/4 screw, the removable arca-swiss quick release plate is suitable for DSLR Nikon Canon Sony Samsung cameras etc, 3/8 screw hole at the bottom can be atta....
Check Stock

Neewer Gimbal Head Panoramic Head Camera Tripod Head Aluminium Alloy with Standard 1/4 inch Quick Release Plate and Carry Bag Max Load 22 Pounds Compatible with Nikon Canon Sony DSLRs

  • ...monopod and other devices with 1/4 inch or 3/8 inch screw, or standard clamp, it is flexible and stable.
  • QR plate with standard 1/4inch screw and anti-slip rubber pad, it is easy to install your camera and keep it safe (Max Load 22 Pounds).
  • VERTICAL 360 DEGREE ROTATION: Composed of 3 independently adjustable boards (horizontal board, vertical board, camera loading board). The built-in stainless steel teeth disc locking design on the vertical board can be adjusted vertically 360 degrees.
  • HORIZONTAL 360 DEGREE ROTATION: Ball head on the horizontal supports 360 degree panning movement with calibrated precision for capturing panoramic overlapping images in horizontal direction. 5 different degree stop increments: 15°/ 30°/ 45°/ 60°/ 90°, stops around n24/ n12/ n8 / n6/ n4. It does not need to look down at the scale when shooting.
  • PLEASE NOTE: Please adjust the position of your camera lens before shooting: The lens node (lens optical center) must be adjusted to coincide with the axis centre of the vertical board and the horizontal board.
  • So the camera's shooting node can be around a fixed point in 3D space and then the image captured by the camera can be pieced together using a software. Please refer to the picture for the adjustment method.
Check Stock

Hobbypower S550 F550 Upgrade Hexacopter Fuselage Frame Kit PCB with Carbon Fiber Landing Gear

  • Wheelbase Diameter: 695MM. Please ignore the description of the boxes and manual..
  • The TAROT 680PRO six-axis aircraft frame is the replacement for the 680 series rack. It has an easy-to-fold design with a lower center of gravity and a more stable design. The exterior design has a strong viewing angle impact..
  • The main body is equipped with a high-strength matt gold process composite PCB circuit. The integrated PCB board connection makes the connection of power supply and ESC faster and safer, and provides sufficient installation space for various flight control systems. It adopts Toray 3K hollow pure carbon fiber carbon fiber tube (non-3K glass tube) for full CNC machining. The design standard is higher than similar products. The new 16MM carbon tube folding seat widens the 3-point support to prevent.
  • The TAROT 680PRO designed for users with high portability requirements, it is especially suitable for monitoring, remote sensing, surveying, aerial surveying, fire observation, life exploration, cable inspection, farm monitoring, etc, which are high requirements on moving performance, light loading, and long flying time..
Check Stock

Center Drill Bits Kit 1.5/2/2.5/3/4mm Center Drill Bit 5pcs High Speed Steel Center Drill Bits 60 Degree Center Drill Bit for Hole Processing

  • [Prefabricated Precise Positioning]: This high speed steel center drill bits is mainly used for the prefabricated precise positioning of hole machining, guiding twist drills for hole machining, thereby effectively reducing errors.
  • [Light Cutting and Good Chip Removal]: It has the advantages of light cutting and good chip removal.
  • When machining a center hole with a diameter of 2-10mm, this center drill is usually used.
  • [5 Center Drill Bits]: This 60 degree center drill bit has 5 center drill bits, which can be used to drill holes of different sizes.
  • [Made of High-speed Steel]: This center drill bit is made of high-speed steel, with high hardness and good wear resistance.
  • [Widely Used]: This center countersink drill bit can not only be used on a lathe, but also can be installed at the end of the workpiece in the center of the lathe.
Check Stock

Andoer Camera Tripod 78.7 inch with Center Column, 2-in-1 Camera Tripod Monopod with 360° Ball Head, 3.9lb Lightweight Aluminum Alloy Tripod, Max Load of 22Ib

  • 360° Horizontal Rotation And Ball Head: The central column can be put horizontally and rotated 360°horizontally to realize panorama and macro shooting freely. The panorama ball head is ideal for panorama shooting, and the build-in bubble levels are perfect for quick level adjustment. With this precise and stable ball head and horizontal central axis, you can capture the perfect photo or video at virtually any angle..
  • Lightweight and Adjustable: The net weight of the tripod is only 1.8kg. Adopt the flip buckle design on 4-section extendable legs, the tripod working height is adjustable from 63cm to 200cm easily, and the folded height is 54cm. The inverted central axis help achieve macro photography..
  • Heavy Duty: Mainly made of high quality aluminum alloy. Max. load capacity is up to 8kg. Enough to handle almost all DSLR/ILDC cameras, camcorders, lightweight or mini projectors, transfer plate, webcam, digital cameras and so on. Foam grips on each legs is perfect to use it even in cold winter..
  • Leg Angle Adjustment: To accommodate uneven terrain, awkward shooting situations or for low angle shooting, the tripod includes a 3-position leg angle adjustment sliding lock. Each leg can be adjusted by pulling the leg angle lock out and selecting one positi....
Check Stock

Tripod Leveling Base Half Ball Quick Tilted up and Down 15 Degrees in Any Direction for Canon Nikon and Other DSLR Cameras Tripods Monopods with Offset Bubble Level

  • ►【360 Degree Panoramic&Pan 15°】It can be used for 360 degree rotation panorama shooting and capture the full 360 degrees panos and It can be tilted up and down 15 degrees in any direction..
  • ►【Wide Compatibility】Wide Compatibility: Widely compatible with various photographic equipment with convertible 1/4” and 3/8” screw on the platform and is connectable with 3/8” screw hole at the bottom..
  • ►【Materia】It is made of high-quality aluminum alloy and precision processed by a high-precision CNC machining center. The surface is hard oxidized, stable and durable..
  • ►【Easy to use】Built-in high-contrast bubble level to ensure accurate alignment of the horizontal plane.Compact design, small and exquisite, easy to carry..
  • ►【Safe Lock】3 locking screws prevents tripod head from moving..
Check Stock

10Pcs Lathe Mill Center Centering Drill Bit Set HSS 60 Degree Combined Countersink Bits

  • 【High Quality Material】 The product is made of high-quality high-speed steel materials, double-edged, standard milling angle of 60 degrees, durable..
  • 【Safe to Use】The product is manufactured in accordance with strict quality standards before leaving the factory, with good safety performance and can be used with confidence..
  • 【Precision Machining】Prefabricated precise positioning for hole processing, guide the drill for hole machining, so reducing error, center hole machining for the end surface of the shaft and other parts..
  • 【Lathe Mill Center】The center is used to make tapered holes for the center of the lathe in order to keep the standard twist drill in place so as to prevent the screw from slipping or deviating..
  • 【Quality Service】 We strive to provide you with high quality and convenient service. You are welcome to contact us if you have any problem about our product, we will give you a satisfactory reply..
Check Stock

FOTOBETTER Camera Tripod Boom Arm,Rotatable Multi-Angle Tripod Center Column Extension for Studio Outdoor Macro Over Head Shooting,5kg Load Capacity,25mm Tube,32cm Length (BA-25 Tripod Extender)

  • Compatibility and Application Tripod Boom Arm:Equipped with 1/4 and 3/8 screw, it is compatible with most ball heads, tripods and cameras. Extension Arm is compatible with all 3/8-inch interface tripod and you can attach 3/8-inch ball head or 1/4-inch camera on Extension Arm..
  • Horizontal and vertical rotatable,Multi-Angle Tripod Center Column: Horizontally 360 degrees rotatable while vertically 180 degrees rotatable.
  • It can hold your camera at your preferred height and angle to meet your need. Perfect for studio/outdoor macro shooting and low angle shooting..
  • Load-bearing capacity Tripod Extension Arm Tube: Sturdy aluminum construction and Spiral Knob Locking System can ensure 5 kilograms load capacity.
  • With a sand bag hook, it can bear up more to keep stable (Sandbag Not included).The maximum extension length of the center column is 330mm, 25mm diameter center column pipe.It weights only 465g..
  • Easy to use:Mount the base on a tripod and mount the camera or ball head on the side.The built-in bubble level allows you to adjust the angle precisely.The adopt spiral knob locking system makes operations easier and quicker..
  • Functions of BA-25 Tripod Boom Arm Center Column:ideal for shootings with the camera position outside of the tripod axis, e.g. from above,....
Check Stock

Hss Center Drill, High Hardness Angle 60 ° Center Drill, for Industry Drill

  • Each center drill has a double end and with standard milling Angle 60 °.
  • Used for parts that need to be machined between production centers or work piece center holding.
  • Prefabricated precise positioning for hole processing, guide the drill for hole machining, so reducing error, center hole machining for the end surface of the shaft and other parts.
  • The center is used to make tapered holes for the center of the lathe in order to keep the standard twist drill in place so as to prevent the screw from slipping or deviating.
  • These center drill set are made of high speed steel, high hardness and durable in use.
Check Stock