Categories

Best 300 Series Stainless Angle Steel

Borla 11806 Aggressive Rear Section ATAK Exhaust System for Mustang GT 4.6L AT/MT RWD

  • Emissions legal and Carb approved in all 50 states.
Check Stock

Elkay D115163 Dayton Kitchen Sink, 15 x 15 with 3.5\ Drain Hole, Satin

  • ADA COMPLIANT: Product is ADA compliant when properly installed..
  • 23-GAUGE STAINLESS STEEL: Commercial grade 23-gauge thickness and 300 Series stainless steel for everyday use..
  • DROP-IN INSTALLATION: Sink is designed for drop-in installation to make the sink a focal point of your room..
  • 300 SERIES STAINLESS STEEL: Designed for everyday use..
  • QUIET: Sound-deadening pad(s) minimizes sound and vibration for a quieter time at the sink..
Check Stock

Mallet DH Bike Pedal Pair, Black

  • CLIP-IN SYSTEM DESIGNED FOR OPTIMAL SHOE / PEDAL INTERFACE: 4-sided entry for superior mud shedding, integrated traction pad technology to optimize the shoe/pedal interface, customizable float & release angle (premium brass cleats with shims included).
  • SUPERIOR STABILITY AND PERFORMANCE: Concave platform for secure foothold, 8 adjustable pins per side for traction, chamfered edges to reduce rock-strikes, ribbed body for better traction when unclipped, 57mm q-factor for stability at speed.
  • DURABLE MATERIALS & LIGHTWEIGHT: 6061-T6 aluminum body with anodized finish, 17-4PH stainless wings, 300 series stainless steel springs, 479g per pair.
  • PREMIUM INTERNAL COMPONENTS: Premium quality Igus LL-glide & Enduro MAX Cartridge bearing and double seal system, chromoly steel spindle, fully serviceable with refresh kit, 5 Year warranty.
  • DESIGNED TOGETHER WITH CRANKBROTHERS SHOES: Crankbrothers clip-in shoes are designed to create the optimal shoe / pedal interface through the Match system..
Check Stock

Rotisserie Genesis II 200/300 series, 7652

  • Includes stainless steel shaft, forks, handle, and hardware designed to hold large and small cuts of meat.
  • Slow-roast a crispy yet moist whole chicken to tender ribs.
  • Fits Genesis II and Genesis II LX 200 and 300 series gas grills.
  • Does not fit Genesis II and Genesis II LX 400/600 series gas grills, Spirit II 200/300 series, Spirit 200/300 series, Spirit 500/700 grills, or Genesis Silver/Gold/Platinum/1000-5500.
  • Care Instruction - Hand wash - Shaft, Forks only.
Check Stock

MikeGarden 7620 7621 7622 7629 for Weber Genesis 300 Series E310 E320 E330 S310 S320 S330 EP/CEP-310 EP/CEP-320 EP/CEP-330 Gas Grills Flavorizer Bar and Heat Deflector and Igniter Kit 4 Outlets 65505

  • ✅【FITS PERFECTLY】Grill parts for Weber genesis 300 series (with Front-Mounted control panel 2011-2016&Newer): weber genesis E-310, genesis....
  • ✅【UPGRADED SOLID STAINLESS】All of ours product made of solid stainless, more strong and durable than others. distributes heat more evenly than....
  • ✅【BUILT TO LAST】Weber Genesis 300 Series flavorizer bars made of heavy duty 17 GA Stainless steel, distributes heat more evenly than other....
  • ✅【DIMENSION AND MATERIAL】Weber stainless steel heat plate: 17.5 X 2.25 X 2.375 inches. 【NON-MAGNETIC HEAT DEFLECTOR DIMENSION】Weber....
  • ✅【PLEASE NOTE】Not compatible with Genesis II or Genesis II LX 300 series grills. Aftermarket replacements, please check the model of your parts....
Check Stock

Ideal Tridon 65E, 6508E, Size 8 Lined Clamps, Stainless Steel Worm Gear, Fits 5/8" - 1, 16mm - 25mm Hose OD, Silicone Heater Hose Clamps, 6508E51 (Pack of 10)

  • Ideal Tridon 65E Series full 300 Stainless Steel Clamps.
  • Series 300 stainless steel band helps provide resistance to corrosion in Automotive and marine environments.
  • Inner liner covers band serrations to help prevent hose damage.
  • Band width of 9/16” provides greater sealing area than smaller width band.
Check Stock

15.3 inch 7636 Flavorizer Bars Compatible for Weber Spirit 300 Series Spirit E310 E320 E330 S310 S320 S330 Grills 5-Pack Stainless Steel Flavor Bars Grill Parts for Weber 7636 Spirit e-310 Grill

  • 【Replacement for Weber Spirit 300 Series】: ✅ A set of 5-Pack 7636 flavorizer bars replacement, Perfect fits for Weber Spirit 300 Series (With....
  • 【Stainless Steel Flavorizer Bars Specifications】: Heat Plate Dimensions: 15.3” L x 2.6” W x 2.5” H, Material: Stainless Steel.
  • 【Proven and Trusted Quality】: We use premium materials only, 7636 flavorizer bars weber spirit e-310 parts is built with quality stainless steel....
  • 【Quality Grill Replacement Part】: Replacement parts for weber spirit 300 ★ Replacement parts for weber spirit e-310 ★ Replacement parts for....
  • 【Important Note & Quality Assurance】: Keep this kit as replacement parts for weber 7636, please be assured that this product will live up to your....
Check Stock

Boston Gear GSS461Y Miter Gear, 0.125\ Bore, 1:1 Ratio, 20 Degree Pressure Angle, 48 Pitch, 18 Teeth, Stainless Steel

  • Straight miter 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • 300 series stainless steel for resistance to corrosion and chemicals.
  • Unhardened teeth for 1:1 gear ratio applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

onlyfire Stainless Steel Grill Rotisserie Kit for Weber Genesis II and Genesis II LX 200 and 300 Series 2022 Genesis 300 Series Gas Grills

  • 【Compatible models】This rotisserie is for Weber Genesis II and Genesis II LX 200 and 300, 2022 Genesis 300 series gas grills..
  • 【Package include】The rotisserie kit includes stainless steel 5/16" square spit rod, 4-prong stainless steel meat forks, motor bracket, rod handle,....
  • 【Powerful motor】110V electric rotisserie motor with of/off switch. Easy to use and convenient, unlike the cordless version, you don't need to....
  • 【Durable stainless steel】Made of durable stainless steel, which lasts longer and provides better heat resistance..
  • 【Ehance your BBQ grilling experience】Rotisserie cooking is still a popluar way to backyard cooking. If you have never used the rotisserie kit....
Check Stock

Weber-Stephen Products 7639 2pk Stainless Steel Cooking Grate (17.3 x 11.8 x 0.5)

  • Fits:Spirit 300 series, Spirit 700, Genesis Silver B/C, Genesis Gold B/C, Genesis Platinum B/C (2005 model year), and Genesis 1000-3500 gas grills.
Check Stock

Broil King 11141 Stainless Rod Cooking Grid Baron Grills Chrome Size 17.4-in x 6.3-In / 1 cooking grid

  • Made of heavy gauge rods and high quality Steel, these stainless Steel cooking grids ensure optimal heat retention and long lasting durability.
  • Fits models: Baron 300/400/500 Series 2013 & newer crown 300/400/500 Series 2012 & newer.
  • Fits huntington Rebel 3/4/5 burner gas grills 2009-2013 huntington Patriot 3/4/5 burner gas grills 2015 & newer.
Check Stock

SHINESTAR 7540-24.5" Flavorizer Bars Replacement for Weber Genesis (3 Burners) 300 Series E-310/E-320 S-310/S-320 EP/CEP-310 & 320 (with Side Control), 24 1/2 inch Stainless Steel Flavor Bar(Set of 5)

  • Replacement for Weber Genesis 310 & 320 Series With Side-Mounted Control Panel, model year are 2007-2010. Replacement for Weber 7539 – 24-1/2″ Long Porcelain Coated Flavorizer Bar Set or 7540 – 24-1/2″ Long Stainless Steel Flavorizer Bar Set.
  • Dimensions: 24 1/2 inch long, 2 3/8 inch wide, 2 3/8 inch high. (Or: 24.5″ H x 2.375″ W x 2.375″ H). Package including set of 5 flavor bars.
  • Made of heavy duty food grade stainless steel, each bar’s thickness up to 18 GA. Built to long lasting, easy to care for.
  • The flavor bars are designed pefectly to catch drippings that smoke and sizzle, adding that irresistible smoky flavor and love to your food. Any drippings not vaporized follow the slope and are funneled away from the burners, so to protect burners.
  • If your grill model is Genesis 300 Series but feature with Front Mounted Control, please refer to SHINESTAR FB7620-17.5 inch Stainless Steel Flavorizer Bar Replacement for Weber Genesis 300 Series with Front Control (Model Years 2011-2016)(SS-WB004).
Check Stock

RADA Wire Stainless Steel Kitchen Whisk with Brushed Aluminum 9-3/8 Inches Pack of 2

  • The Handi-Stir Wire Whisk reaches all corners and bottoms of pans easily so you know you will have perfectly blended recipes. The spring and shaft on the wire whisk are made from 300 series high nickel stainless steel. The spring features a unique design so that food does not stick to it. The handle is made from permanently cast silver brushed aluminum with a satin finish. This whisk measures 9-3/8 in and is suitable for both professional and home cooks. Handwashing is recommended. Pack of 2..
  • BETTER COOKING WHISK – Where your standard whisk fails, this wire whisk succeeds. Reach all corners and bottoms of pans easily. Mix batters, gelatin, gravies, sauces, and more! Pack of 2..
  • STAINLESS STEEL SPRING – The spring and shaft on the wire whisk are made from 300 series high nickel stainless steel. The spring is shaped so that food does not stick to it..
  • BRUSHED ALUMINUM HANDLE - The handle on the wire whisk is made from permanently cast silver brushed aluminum with a satin finish. This kitchen utensil should not be washed in the dishwasher. Handwashing is recommended..
  • AMERICAN MADE UTENSIL – Rada Mfg. Co. is located in Waverly, Iowa and has been manufacturing cutlery in the USA since 1948. Our mission is all about “providing our customers the ....
Check Stock