Best 300 X 450mm Brick Tile
NewYall Walnut Wood Leather Gear Shift Knob
- High-quality aftermarket gear shift knob with premium leather and electroplated chrome..
- For Lexus ES300h ES350 GS300 GS350 GS430 GS450h GS460 IS-F IS250 IS300 IS350 LS460 LS600h RX350 RX450h. Compatible Models and Years are presented in the Description..
- Fits Automatic Transmission shifter with 8mm thread diameter size (M8 x 1.25)..
- Size: 3.74" x 2.16" x 1.97" (9.5cm x 5.5cm x 5cm) | Thread depth: 1.97” (5cm) ..
- Compatible with most of the Lexus, Toyota, Mazda, Scion, and Acura car models with 8mm thread size automatic shifter..
Check StockK Kwokker 15Pcs Masonry Drill Bit Set 5/8\ to 1/8\
- ...rk with a minimum of pressure. Like a hot knife thru butter! WATER IS THE KEY TO GETTING DRILL BITS TO LAST. PLEASE COOLING WITH WATER AND CONTROL THE SPEED WHEN DRILLING..
- ☺[Widely Used Range, a Good Beginning is Half Done, Carbide Drill Bits Perfect For] masonry, title, glass, wood, plastic, ceramic, terracotta, brick, stucco, brick, cinder block, steel, laminate flooring, garden pot, marble, pickguard, mirrors, windows, etc. PLEASE NOTE THAT FOR DIFFERENT SIZES, IT IS RECOMMENDED TO USE DIFFERENT DRILLING SPEEDS TO PREVENT DRILL BIT DAMAGE CAUSED BY WRONG DRILLING SPEEDS..
- ☺[1 x K Kwokker Ceramic Drill Bit Replaces Two Drill Bits (1 x Glass & Tile Drill bit + 1 x Masonry drill bit), Higher Efficiency] Custom triangle spear tip solves drill bit wander and slipping. U-shaped groove drill body, the drill body is central ground and anti-rust treatment, so that the drainage is smoother..
- ☺[15 Years of Industry Experience, Professional Grade Ceramic Drill Bit Used in] General drill, electric drill, hand drill and bench drill, the drill bit can be installed and used. Impact drill is not recommended. High speed spiral can be effective in the removal of debris and it can improve your work efficiency. Here are the can't-miss option you..
Check StockKILZ Restoration Primer, Interior, 1 Gallon
- It tackles tough stains including medium to heavy water damage, rust, smoke, nicotine, grease, tannin, ink, pencil, felt marker, pet stains and more. Seals strong odors (fire, smoke, pets).
- Topcoat with latex or oil-based paint. Use on properly prepared interior surfaces, such as: brick, ceramic tile, drywall, glass, masonry, painted metal, plaster, stucco and wood. Performance of oil and shellac / Blocks tough stains (heavy water, grease and typical interior stains) and odors. Dries hard, sands easily - a great enamel undercoat.
- Use on: drywall, woodwork, plaster, masonry, brick, painted metal, ceramic tile, glass and most other glossy surfaces. Use on properly prepared surfaces free of dust, grease, chalk, rust and peeling paint. Mix well before using. Apply with brush, roller or airless sprayer..
- This is a 1-gallon can of KILZ Restoration Latex Primer, Sealer, and Stain blocker for interior surfaces in white. Covers approximately 300-400 square feet per gallon. KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend Rankings..
- Performance of oil and shellac / Blocks tough stains (heavy water, grease and typical interior stains) and odo....
Check Stock6PCS Ceramic Tile Drill Bits, Mgtgbao Masonry Drill Bits Set for Glass, Brick, Tile, Concrete, Plastic and Wood Tungsten Carbide Tip for Wall Mirror and Ceramic Tile with Size (6mm-12mm).
- _6 pieces fine grade high durable drill bits in 4 different sizes: that is 2 x 6 mm(1/4"), 1 x 8 mm(5/16"), 1 x 10 mm(3/8"), 1 x 12 mm(1/2") fit your different needs.
- _ High Quality Multi-purpose Drill Bit Set: Tungsten Carbide Tipped for prolonged life and heavy-duty use.
- _Special Design: U type slot design with fast drilling dust remove, 3-flats shank allows drill bit to be held tightly and stably in power drill..
- _Cut Perfect Circles Holes: Suitable for glass, ceramic tile, wood, ceramic, stone, concrete, brick, etc. When drilling hard material (glass, porcelain floor tile, marble or granite), please use water for lubrication.
- _ One drill bit replaces two drill bits (1x glass & tile drill bit + 1x Mansonry drill bit). Ideal for drilling fastner holes in bathroom tiles, or wall mirrors. Once it drills through the tile or mirror this drill bit will cope easily with any masonry behind it.
Check StockGoYonder 7 Tile Saw Blade Wet for Angle Grinder, Super Thin Diamond Saw Blade Grinder Blades for Wet Dry Cutting, Diamond Blade for Cutting Ceramic, Porcelain, Tiles, Granite, Marbles (Blue, 7\)
- ...his little tile cutting blade has 1.4mm thickness runs smooth fast and quiet actually. they have the right thickness, thin enough to minimize loss of material but thick enough not to drift during cuts..
- 【Widely Application】: This diamond blade can be used to cut porcelain tile, Granite, Marble, sandstone quartz, brick, slate, cement backer board and other thin masonry blade with. Went through many materials easily like it was butter. It will be a perfect partner for tile installers and general homemade DIY..
- 【X Teeth Rim Design】: The tile saw blade wet has X Teeth rim edge help to increase the work efficiency, strong body and excellent material formula, high quality diamonds can efficient cutting and provide longer service life. Warm Prompt: For your personal protection, before you start working we recommend that you wear safety glasses, dust aspirators, welding gloves, safety shoes, and other appropriate equipment.(Take good care of your eyes/ears/face/hands/body/etc).
- 【Tile Blade Wet & Dry Cutting】: This porcelain saw blade works on most hand-held angle grinder saws, air cut off tool and electric cut off tool with arbor size 7/8" or 5/8" for wet or dry cutting. Easy to install and ready to use..
Check StockBETCKEY - Compatible DYMO 30252 (1-1/8\ x 3-1/2\ Removable) Address Labels - Compatible with Rollo, DYMO Labelwriter 450, 4XL & Zebra Desktop Printers[1 Rolls/350 Labels]
- Replaces: Dymo 30252, Dimensions: 28mm x 89mm(1.25"x 3.5"), Colour: White, Adhesive: REMOVABLE, Direct Thermal, BPA Free, Labels per Roll: 350.
- Compatible Dymo Label Writer Printers: :300, 310, 315, 320, 330, 400, 400 Duo, 400 Twin Turbo, 450, 450 Duo, 450 Turbo, 450 Twin Turbo, 4XL, EL40, EL60, SE300, SE450, CoStar LabelWriters: XL, XL+, BC, BC+, TURBO, SE200, SE250, ACII 200 / ASCII 250.
- Quality Grade A Paper with REMOVABLE Adhesive and Sharp Print (White Backed).
- Brand new and high quality compatible white standard address labels manufactured with Standardization ISO 9001 and ISO 140001.
- Guaranteed The Best Quality You Will Find in The Market:Our papers are of superior quality, and are your best choice in the market, for such an affordable price. They don't go yellow, they don't smudge, and there are never scanning issues!.
Check StockKILZ Standard White Flat Water-Based Acrylic Primer and Sealer 5 gal - Case of 1
- KILZ Restoration (formerly KILZ MAX) is a water-base primer, sealer and stain blocker developed with new technology that is formulated to perform like....
- It tackles tough stains including medium to heavy water damage, rust, smoke, nicotine, grease, tannin, ink, pencil, felt marker, pet stains and more.....
- Topcoat with latex or oil-based paint. Use on properly prepared interior surfaces, such as: brick, ceramic tile, drywall, glass, masonry, painted....
- Use on: drywall, woodwork, plaster, masonry, brick, painted metal, ceramic tile, glass and most other glossy surfaces. Use on properly prepared....
- This is a 1-gallon can of KILZ Restoration Latex Primer, Sealer, and Stain blocker for interior surfaces in white. Covers approximately 300-400 square....
Check StockGoYonder 7 Inch Diamond Saw Blade for Cutting Stone, Concrete, Brick, Granite Suitable for 7/8\ Arbor
- Thickness:2.8 mm, Outer Diameter:180 mm /7 inch.
- Suitable for most tile saws and hand-held angle grinders with a 7/8" Arbor..
- 7 inch diamond blades are universal for dry or wet cutting, Hot pressed and super thin design provide long life.
- Turbo segment rim design not only provides faster cutting but also ensures a longer service life..
- GoYonder diamond saw blades are designed for cutting stone, concrete, brick, tile, granite, marble, masonry..
- Warm Prompt: For your personal protection, before you start working we recommend that you wear safety glasses, dust aspirators, welding gloves, safety shoes, and other appropriate equipment.(Take good care of your eyes/ears/face/hands/body/etc).
Check StockFlammi 3 Pack Replacement Microfiber Vacuum Pads for Shark Rocket Dust-Away, Rotator, Navigator Lift-Away Pro Vacuum, Ultra Light Stick Vacuum, HV300 Series
- Compatible with Shark Rocket Dust-away, Rotator, Navigator Lift-away Pro Vacuum, Ultra Light Stick Vacuum, HV300 Series.
- Works with models: HV300, HV300W, HV300C, HV301C, HV302, HV303, HV305, HV310, UV450.
- Used with Dust-Away Hard Floor Attachment. Microfiber dust pads, machine washable, reusable.
- Each Pad Size: 10.2 x 8.3 inches/26x 21cm.
- Picks up dust and dirt easily with the pad on dry bare hardwood and tile floors surface.
Check StockAnkey 14 Pcs Masonry Drill Bits, 1/4\ Hex Shank Concrete Drill Bits Set for Ceramic Tile, Brick, Glass, Plastic and Wood, Hard Alloy Tip Works with Ceramics, Marble, Granite
- [Special Cross Shaped Tip Design]--Benefits from the unique cross tip design, these masonry drill bits can work with less skating and shaking, which can help you to finish your job accurately..
- [Premium Material]--Our concrete drill bit set is made of premium industrial YG8 carbide alloy with heat treatment for maximum durability, with the YG6X carbide cross head, it provides fast drilling in materials like concrete, brick, ceremaic, tile, marble, mirror, thin iron plate, plastic, glass and wood..
- [Wide Compatibility]--These ceramic drill bits comes with universal 1/4" hex shank, it can be changed quickly and reduce slipping in chuck efficiently. In addition, these tile drill bits can work with hand drill, rechargeable electric drill (24V at least) and bench drill with locking into quick change chuck..
- [What’s In The Box]--14 pieces premium durable drill bits, includes 4 X 3/16"(5mm), 4 X 1/4"(6mm), 2 X 5/16"(8mm), 2 X 3/8"(10mm), 2 X 1/2"(12mm) to meet variety of needs..
- [Warm Reminder]--Please try to keep the drill vertical on the surface and keep bits cool with flowing cooling water. Do Not use on hard tile..
Check Stock2) Kicker CSC674 6.75\ 600w Car Audio Speakers 2) CSC6934 6x9\ 900w Speakers
- Pair KICKER 46CSC674 6.75" 6-3/4" 300w 4-Ohm Car Audio Coaxial Speakers . Speaker Design: 2 - way. Woofer Size: 6 3/4 in. (165 mm). Tweeter Size: 1/2 in. (13 mm). DC Resistance: 3.3 ohms. Peak Power: 300 Watts per speaker / 600 Watts per pair..
- Effective Frequency Range: 40Hz - 20kHz. Mounting Hole Diameter: 5 1/2 in. (140 mm). Top Mount Depth: 3/16 in. (4 mm). Bottom Mount Depth: 1 13/16 in. (47 mm). Grilles: Yes. Tweeter Magnet Material: Neodymium..
- Pair KICKER 46CSC6934 6"x9" 6x9 450 Watt 4-Ohm 3-Way Car Audio Speakers . Speaker Design: 3 - way. Woofer Size: 6x9 in. (160x230 mm). Mid Size: 2 in. (50 mm). Tweeter Size: 1/2 in. (13 mm). DC Resistance: 3.5 ohms..
- Peak Power: 450 Watts per speaker / 900 Watts per pair. Continuous Power (RMS): 150 Watts per speaker / 300 Watts per pair. Sensitivity: 92 dB @ 1W, 1m. Effective Frequency Range: 30Hz - 20kHz. Mounting Hole Diameter: 5-5/8 x 8-7/16 in..
- Top Mount Depth: 7/16 in. (12 mm). Bottom Mount Depth: 3 3/16 in. (81 mm). Tweeter Protrusion 1/16 in.(1 mm). Grilles: Yes. Tweeter Magnet Material: Electric Crystal Motor. Tweeter Dome Material: PEI (polyether imide)..
Check StockHDBUBALUS Motorcycles Axle Cover Spun Blade Spinning Axle Caps Cover Fit for Harley 29.5MM Street Glide Black
- Only fits 20mm axle **verify axle size prior to ordering**.
- Fits KTM Dirt Bike Models: 125 EXC, 125 SX, 125 SXS, 144 SX, 150 SX, 150 XC, 150 XC-W, 150 XC-W TPI, 200 XC, 200 XC-W, 250 EXC-F, 250 SX, 250 SXS, 250 SXS-F, 250 SX-F, 250 XC, 250 XC-F, 250 XC-W, 250 XC-W TPI, 250 XCF-W, 300 EXC, 300 XC, 300 XC-W, 300 XC-W TPI, 350 SX-F, 350 EXC-F, 350 XC-F, 350 XCF-W, 400 EXC-G, 400 XC-W, 450 EXC, 450 EXC-F, 450 EXC-G, 450 EXC-R, 450 SMR, 450 SX, 450 SXS, 450 SX-F, 450 SXS-F, 450 XC, 450 XC-F, 450 XC-G, 450 XC-W, 450 XCR-W 500 EXC, 500 EXC-F.
Check StockTanzfrosch 4.5 inch Diamond Saw Blade 4.5\ Cutting Disc Wheel for Cutting Porcelain Tiles Granite Marble Ceramics Works with Tile Saw and Angle Grinder (3 Pack, Blue)
- ★FIT SIZE: Outer Diameter: 115mm (4.5 inch). Thickness: 1.2mm. Suitable for most tile saws and hand-held angle grinders with a 7/8" Arbor..
- ★HIGH PERFORMANCE: Tanzfrosch tile cutter blade outer edge is plenty strong, X teeth offer fast and smooth cutting. Thicker center to avoid vibrations and wobbling. High-Performance diamond matrix provides long life and enhanced material removal..
- ★COMPATIBLE MODELS: It can be used on different types of angle grinders and tile cutters for Wet and Dry cutting..
- ★WIDE APPLICATIONS: Tanzfrosch tile cutter blade is designed for cutting porcelain, ceramic tile, granite, sandstone quartz, marble, brick, slate, cement backer board . It will be a perfect partner for tile installers and general homemade DIYers..
- ★BUY WITH CONFIDENCE: If any of our products fail to meet your expectations, please get in touch with us and we will try our best to resolve the issue..
Check Stock