Categories

Best 3528 Strip Light

Vbakor 6 Pcs 12'' Boat Interior Lights 12V Marine Courtesy Light Strip, Super Bright 18 LEDs Boat Deck Transom Cockpit Navigation Light, Waterproof Marine Lights for Pontoon Yacht (White)

  • ✅【Product Details】: 6 Pcs 12’’ 30cm White led strip lights with each 18 Pcs super bright 5050 chips, which is 3 times brighter than other 2835/3528 car lights on market, IP67 waterproof tube for any 12v boat interior and exterior use..
  • ✅【IP67 Waterproof】: The LED strip is put in silicone tube, which protects it very well from water & dust and makes it easy to clean. It will work well on exterior lights, even in extreme weather such as rainstorms..
  • ✅【Super Bright Lights】: Most of boat lights are SMD3528/2835 lights on market, not bright and only 6 normally led chips, But our lights are SMD5050 lights with 12 super bright led chips, which is 3 times brighter than other 2835/3528, this brightness is very safe for driving at night,. Touchable to children..
  • ✅【Widely Application】: The lights are widely used for boat interior light, cockpit light, deck light, transom light, step light, cabin light, courtesy light, navigation light, stern light, side light, accent atmosphere light, etc..
  • ✅【Easy to Install】 : These led strip light works on 12-volt only, 2 wires connection: The Black wire is Negative and the Red wire is Positive. The lights backing with stronger 3M VHB double-side adhesive, just peel off the paper and stick to sur....
Check Stock

15/Pack LED Light Strip Extension Connector AWSOM 2 pin 8mm LED Connector Strip to Strip Any Angle Compatible with Single Color SMD 3528 LED Strip Lights

  • ★Only for 8mm Width Soft Strip Lights: The LED strip connector is for extending 2 pin 8 mm 3528 single color LED light strip, not for 3528 RGB LED strip and 10mm width led strip lights..
  • ★FLEXIBLE STRAND: The 8mm 2-pin Connector wire allows you to connect LED strip lights freely so you can run super long light bars according to your needs. And 6.61 inches flexible wires can be bend around corner and over obstacle..
  • ★DURABLE: Crafted with high-grade PC materials and fine workmanship, it is solid and durable for long-lasting use..
  • ★PQUICK & SOLDERLESS CONNECTION: It will help you to save time and get rid of headache of soldering.Just clasp your prepared led strip section into the connector to get connected..
Check Stock

2 Pack 2M 6.5ft RGB Extension Cable LED Strip Connector 4 Pin Solderless Strip Jumper Cables Kit with 4 Pack 4 Male Pin Connector for 5050 3528 RGB LED Strip Light

  • Compatibility: fit for all 10mm 4-pin RGB LED strip lights, for Both 5050/3528 RGB Waterproof and non-waterproof LED strip light..
  • Easy to Install: Solderless, installation without tools, save time. Make sure arrow to arrow, plug and play..
  • Operating conditions: The RGB LED strip light extension cable supports maximum wattage of 72W , and 0-24v voltage input. Suitable for most 10mm 4-pin....
  • 2-pack extension cable: The RGB strip extension cables can connect between the IR/RF Controller and 5050/3528 LED strip light, extending strips to the....
  • What You Get: 2 packs 2M/6.5ft RGB Extension Cables, 4 pcs 4 male pin connectors, 8 pcs self-adhesive Cable clips, 30 days money back guarantee plus....
Check Stock

Vbakor 12V Marine Boat Ultra Violet UV Black Light LED Lights Strip, Night Fishing Lights, 5050 LED IP67 Waterproof UV Led Strip for Fishing Pontoon Kayak Yacht Sailboat (4 Pcs 20'')

  • ✅【Product Details】: 4 Pcs 20’’ 50cm led strip lights with each 30 Pcs super bright 5050 chips, which is 3 times brighter than other 2835/3528 car lights on market, IP67 waterproof tube for any 12v boat interior and exterior use..
  • ✅【IP67 Waterproof】: The LED strip is put in silicone tube, which protects it very well from water & dust and makes it easy to clean. It will work well on exterior lights, even in extreme weather such as rainstorms..
  • ✅【Super Bright Lights】: Most of boat lights are SMD3528/2835 lights on market, not bright and only 6 normally led chips, But our lights are SMD5050 lights with 12 super bright led chips, which is 3 times brighter than other 2835/3528, this brightness is very safe for driving at night,. Touchable to children..
  • ✅【Easy to Install】 : These led strip light works on 12-volt only, 2 wires connection: The Black wire is Negative and the Red wire is Positive. The lights backing with stronger 3M VHB double-side adhesive, just peel off the paper and stick to surface, the adhesive surface must be clean and dry, It’d better to clean the surface with alcohol, Please test the lights before stick to surface, Please check polarity before wiring..
  • ✅【Widely Application】: The lights are widely used for....
Check Stock

5M/16.4ft SMD3528 300LEDs Near Infrared 940nm NIR Single Chip DC12V 24W Flexible IR LED Strips Light Non-Waterproof 8mm Wide 60LEDs/M 4.8W/M Light Strip

  • - Strip Specification: SMD3528-300LED, 12VDC 24W 2Amp, 5Meter/roll,single row LED Flexible Strip, Every 3 LEDs 2inch per section can be cut..
  • - Professional Usage: 940nm Infrared invisible light LED strip is generally used for monitor or security, multitouch display screen, night vision light, photo-filling light and outdoor infrared light..
  • - Warm Tips: Do not buy this product for accent lighting or general illumination. It is for special purposes only. Excessive exposure to infrared light may be hazardous..
  • - Package included: 1 x 5Meter 940nm 3528-300 IR LED strip, 1 x Female power jack connector.
  • - After-sale service: This item is under 1 year warranty, please feel free to contact us if you meet any problem with the strip, we will solve your problem asap..
Check Stock

Vbakor Boat Led Strip Lights, 4 Pcs 24'' Marine Boat Interior Courtesy Deck Navigation Lights, Super Bright Waterproof Marine Led Lights Strip for 12V Pontoon Fishing Boat Yacht Kayak Sailboat (Blue)

  • ✅【Product Details】: 4 Pcs 24’’ 60cm led strip lights with each 36 Pcs super bright 5050 chips, which is 3 times brighter than other 2835/3528 car lights on market, IP67 waterproof tube for any 12v boat interior and exterior use..
  • ✅【IP67 Waterproof】: The LED strip is put in silicone tube, which protects it very well from water & dust and makes it easy to clean. It will work well on exterior lights, even in extreme weather such as rainstorms..
  • ✅【Super Bright Lights】: Most of boat lights are SMD3528/2835 lights on market, not bright and only 6 normally led chips, But our lights are SMD5050 lights with 12 super bright led chips, which is 3 times brighter than other 2835/3528, this brightness is very safe for driving at night,. Touchable to children..
  • ✅【Easy to Install】 : These led strip light works on 12-volt only, 2 wires connection: The Black wire is Negative and the Red wire is Positive. The lights backing with stronger 3M VHB double-side adhesive, just peel off the paper and stick to surface, the adhesive surface must be clean and dry, It’d better to clean the surface with alcohol, Please t....
Check Stock

40 Pieces LED Strip Lights Connectors 2 Pin RGB Strip Lights Connector T Shape Solderless LED Adapter Light Connectors L Shape RGB LED Connector for SMD 3528 2835 LED Strip Light (8 mm)

  • What you will get: the package comes with 10 pieces L shape RGB connectors, 20 pieces gapless 2 pins connectors and 10 pieces T shape LED adapters light connectors, the sufficient quantity could meet your various demand in daily life.
  • Reliable material: this LED light strip connector is made of quality PBT material, flame proof and heat resistant, and the plastic is thick enough to ensure its safety and durability.
  • Installation guide: please power off before installation to ensure safe operation, and these LED light strip connectors are suitable for 0 - 4 A current and 0 - 24 voltage.
  • Moreover, these LED connectors are suitable for LED light strip SMD 3528 2835, and the maximum power is 72 W.
  • Easy to use: first of all, you need to open the wire clip, then install the ribbon light into the connector.
  • When installing, you should make sure the side of the light strip is in accordance with the site of + symbol in the connector.
  • Lastly, close the wire clip, you will find that there are no other tools needed, the operation is easy and fast, you can enjoy your bright and beautiful lighting.
  • Wide application: these strip light connectors can be applied for SMD 3528 2835 LED strip light, and they also fit for most light strips in the market.
Check Stock

SUPERNIGHT Led Strip Light, 16.4Ft SMD 2835 RGB 300 LEDs Color Changing Kit with Flexible Strip Light 44 Key IR Remote Control and Power Supply for Room ,Christmas

  • This is 3528 SMD LED lights,so each LED lamp bead has only 1 kind of color (Red,Green or Blue),so there are 3 kinds of lamp beads on the light strip (No White Color).
  • Every 6 LEDs can be cut following the cutting line as you request..
  • High Quality 3528 SMD LED, high intensity and reliability, Long lifespan，Bright 3528 SMD LED with long life span >50,000 hours，Excellent luminous efficiency, low temperature, low power consumption..
  • Self-adhesive tape on back of strip light is easy to fix and install, Before using double-sided adhesive, please wipe clean the surface of wall or any where you want to stick the LED strip on.
  • Widely used for home, hotels, clubs, shopping malls. Holiday, event, show exhibition decoration. Auditorium walk stairway lighting, Hidden groove, Wine cabinet Decor Amusement park, theater and aircraft cabin mood lighting Applicable for automobile, boat and bicycle decoration DIY Decoration, whatever and wherever you like!.
Check Stock

HitLights LED Strip Connector 2Pin 8mm LED Connector Kit Include Solderless Gapless Connector, 6Inch Jumper Connector, DC Female and Connector, DC Jack Splitter for 3528 5050 LED Strip

  • 【USE FOR 2835 3528 LED Strip】The gapless LED connector, jumper connector, and DC female and connector can use for 8mm 3528 or 2835 High Density led strip light. The DC jack splitter use for all led tape lights..
  • 【LED Connector Kit Package Included】 8 x Gapless Connectors, 6 x LED Jumper Connector, 4 x Female and DC Connector, 2 x 2way DC Splitters. 8mm LED Connector Kit can meet almost all the needs for hanging up LED light strips..
  • 【8mm LED Strip Complete Solution】This is a complete DIY led light strip accessory kit that provides the perfect solution for your furniture, cabinets, and more..
  • 【Easy Installation】Simple installation,connect according to the positive and negative terminals of the connector, simply slot the strip light into connector and clamp the cover. No welding and other processes are required.
  • 【HitLights Quality Warranty】90 days refund, 1 year warranty. You can contact our customer service at any time to help solve installation and after-sales problems (reply within 24 hours)..
Check Stock

Nelyeqwo 2 Pack 5M 16.4ft RGB Extension Cable LED Strip Connector 4 Pin Solderless Strip Jumper Cables Kit with 4 Pack 4 Male Pin Connector for 5050 3528 RGB LED Strip Light

  • High Quality: The LED strip light extension cable insulation made of PVC material, anti-corrosion, wire contains 4 strands of tin-plated pure copper, which is resistant to oxidation, flexible and tough, durable and longer life.
  • Easy to Install: Solderless, installation without tools, save time. Make sure arrow to arrow, plug and play.
  • Operating conditions: The RGB LED strip light connectors support maximum wattage of 72W , and 0-24v voltage input. Suitable for most families.
  • Function: The RGB extension cable can connect between IR/RF Controller and 5050/3528 LED strip light, extend strips to the ideal location. Or connect between 2 RGB LED strips, convenient and practical.
  • What You Get: Cost-effective, 2 x 5M 16.4ft RGB Extension Cable and 4 x 4 male pin connector for 10mm 5050/3528 RGB Waterproof and non-waterproof LED strip light.
Check Stock

6 Pieces 4 Pin RGB Extension Cable LED Strip Connector Cord Wire Solderless Strip Jumper Cables Kit with 12 Pieces Pin Connector for 5050 3528 RGB LED Strip Light (Black, 1.6 FT, 3.3 FT, 6.6 FT)

  • What you get: the package includes 6 pieces of 4 pin RGB extension cable LED strip connectors and 12 pieces 4 male pin plugs for 10 mm 5050/ 3528 RGB waterproof and non-waterproof LED strip light.
  • 3 Different sizes: the length of the LED strip connector cable is 50 cm/ 1.6 ft, 1 m/ 3.3 ft, 2 m/ 6.6 ft, which can meet different DIY needs.
  • 2 Major functions: the RGB extension cable can be connected to IR/RF controller and 5050/ 3528 LED strip to extend the strip to reach an nice position.
  • Or it can be connected between 2 RGB LED strips, which is convenient and practical.
  • Easy to install: with 2 pre-welded female connectors and 12 pieces 4-pin male plugs (copper plated), the installation of these light strip extension cords do not need to be soldered and without tools, saving time.
  • Quality material: the insulation of the LED light strip extension cord is made of PVC material, which is corrosion-resistant.
  • The wire contains 4 strands of tin-plated pure copper wire, which is oxidation-resistant, flexible and durable.
Check Stock

3528 2-pin 8mm LED Connector kit led Strip Connector L-Shaped Connector 2-pin Right-Angle Connector T-Shaped Connector Solderless Seamless Connector Jumper Connector (8mm)

  • The LED connector kit is suitable for 2835 3528 2-pin 8mm LED light strips. It is easy to install. Connect the positive and negative poles of the connector. Just insert the light strip into the connector and clamp the cover. No need for welding and other processes.
  • Strip connectors include: 8 XL connectors, 2 XT connectors, 2 X female and DC connectors, 2 X DC power supply 2way distributors, 20X LED seamless connectors, 4 X 3825 2pin LED with pigtails Connector, 6 X 3528 2-pin LED light with jumper connector, 20 X set of screw fixing clips, 20 X self-adhesive light bar mounting clip.
  • Note: When the waterproof LED light strip is connected with these LED light strip connectors, the silicone on the surface of the welding area must be peeled off.
  • 2-pin 8mm LED connector supports 0-4A current and 0-24V voltage input, and the heat resistance rating is -20~100 degrees.
  • 100% satisfaction guarantee: GOOCHAN connector kits are sold with a 30-day money-back guarantee. If you have any questions about this product, please feel free to contact us. We will solve the problem for you as soon as possible after receiving the information.
Check Stock

Nexillumi L Shape 4-pin Connectors Angle Adjustable(90-180 Degrees) LED Strip Connectors for 10mm Width 5050 RGB LED Strip Lights(10 Pcs)

  • Only compatible with【4-pin 10mm】5050/3528 RGB LED strip lights and 2835/3528 4-pin 10mm LED Strips, not for 2-pin white 3528/2835 lights, not for dreamcolor chasing LED strip lights, not for tunable white LED strips, not for 2-pin white light strips, please make sure if your LED strips are 4-pin and 10mm.
  • L-shape 90 degree and the corner is adjustable and bent straight without being broken, the cords are intensified cords, and length is customizable.(Extra cables are not included).
  • Suitable for 4-pin 10mm LED strips that are IP65 waterproof and IP20 non-waterproof, please check the user manual in the photo gallery for how to use the LED strip connectors..
  • Remove part of the back-adhesive on the LED strips if you want the LED strips to have stable connections..
  • All products sold by us have a warranty of 365-day free replacement for defective products(Like Broken LED Lights or Power Adapter) and 30 days hassle-free full refund, please rest assured buying these. Thank you for choosing Nexillumi products..
Check Stock