Best 3540 Precision Potentiometer

4000 mm Stroke Draw Wire Linear Displacement Sensor Transducer CWP-M4000 (0-10KOMH)

• 【Good Quality】The cover shell of KPM12 rod sensor is aluminum, rod is stainles steel, PCB board with machine linear engraving. High precision linearity and repeatability..
• 【Potentiometer Principle】 This sensor adopts potentiometer principle, output signal is 0-100% of input voltage while changes with displacement..
• 【Plug & Use】The sensor is with Hessman plug, easy and convenient while using. This sensor can be fixed on machines..
• 【Wide application】This displacement sensor is widely and common used in injection machine, wood machines, hydraulic machinery..
• 【Safety】This product is covered with aluminum, rust resistance, long service life. High protection class IP67, good protected, it is workable when powered. Safe to use..

Power Supply Adjustable,Constant Voltage Programmable Step-Down Power Supply Switching Module LCD Voltage Converter(DPS5005)

• FEATURE: The product is small in volume, advanced in function, good in effect, strong in maneuverability and high in precision.
• OPEN OR CLOSE THE OUTPUT: You can press the ON/OFF button to open or close the output on any interface..
• LOCK THE BUTTON TO AVOID WRONG OPERATION:On any interface, you can keep pressing coding potentiometer for 2 seconds, all buttons are locked. Keep pressing coding potentiometer for 2 seconds to unlock all buttons. You can see the key lock/unlock icon on.
• M0-M9 TEN DATA GROUPS: M0 group is the boot default data group. When you extract the data group you need, this data group will cover M0 data group and be automatically stored on M0 data group..
• PRACTICAL: You can quickly extract shortcut storage data group M1 or M2 and extract the specified data group.

OCR 1K-500K ohm Potentiometer Kit 35 Sets Knurled Shaft Linear Potentiometer with Knobs Nuts and Washers 7 Values 1K 5K 10K 20K 50K 100K 500K 3 Terminal Rotary Potentiometer

• ✅ Top adjustment type and knurled shaft single linear 3 terminal 7 values 1K 5K 10K 20K 50K 100K 500K Ohm rotary potentiometer..
• ✅ Linear knurled shaft potentiometer. Shaft diameter:6mm, shaft length:17mm.
• Mounting thread diameter:6mm, base size:16*7mm.
• ✅ Potentiometer kit offers 35pcs potentiometer knob caps. 300 degree rotary knob for easily control the potentiometer..
• ✅ Top adjustment type and knurled shaft for easy operate in daily use time. Stander round shaft can be push on potentiometer easily..
• ✅ Taper potentiometer used for volume control of audio sets, car radios, amplifiers, mixers, synthesizers and other appliances. For electronic....

PC Racing Wheel, PXN V3II 180 Degree Universal USB Car Sim Game Steering Wheel with Pedals for PS3, PS4, Xbox One,Xbox Series X/S,Nintendo Switch (Orange)

• PRODUCT DESCRIPTION: The game steering wheel has a 180 degree angle which covered with soft rubber wave design grip makes the hand feel comfortable and real. It also has big size pedals with acceleration and braking control.While the unique flame totem increases the passion of the game, the high-precision rotary potentiometer control technology allows the direction to be automatically centered..
• SIMUALTION DESIGN: The Shape is Ergonomically Designed According to The Racing Steering Wheel.
• The Built-in Dual Vibration Motors Bring a More Realistic Drag Racing Experience..
• AUDIO FUNTION: Use with PS4/xbox one, support voice function..
• OVERALL: With brake and accelerator pedal, the steering wheel adopts super-running design, with exclusive flame totem, and two colors of black and orange..

TWTADE / 3pcs Wh138 100k ohm Potentiometer Single Turn Rotary Linear Variable Potentiometer +3pcs black Aluminum alloy knob

• Potentiometer Body Size : 24 x 10mm / 0. 9″ x 0. 39″(D * H).
• Potentiometer Total Height : 26mm/1. 02″.
• Rotary Knob Size : 17 x 21mm/0. 67″ x0.83″(H*Max. D).
• Rated Power: Linear taper B: 0.5W, Other Tapers: 0.25W.
• Rotational life of the Potentiometer: 10000 Cycles, Rotational life for joystick: 100000 Cycles Min..
• Package Content : 3 Pcs x Switch Carbon Potentiometer + 3 Pcs x black Aluminum alloy knob.

Molence 5PCS RV24YN20S 10K ohm Single Turn Carbon Film Rotary Potentiometer with Knob Dials for Motor Speed Control (B103 10K ohm)

• Potentiometer Body Size : 24 x 10mm / 0. 9" x 0. 39"(D * H).
• Potentiometer Total Height : 26mm/1. 02".
• Rotary Knob Size : 17 x 21mm/0. 67" x0.83"(H*Max. D).
• Rated Power: Linear taper B: 0.5W, Other Tapers: 0.25W.
• Rotational life of the Potentiometer: 10000 Cycles, Rotational life for joystick: 100000 Cycles Min..
• Package Content : 3 x Switch Carbon Potentiometer + 3 x black Aluminum alloy knob.

Electronics-Salon 1KHz to 33MHz Adjustable Oscillator Module, LTC1799

• Two 25 turns precision trimming potentiometer.
• Design based on Linear Technology LTC1799 IC..

BOJACK 12 Values 60 pcs Variable Resistor 100 to 500K ohm 3296W Multiturn Trimmer Potentiometer Assortment Kit

• resistance Tolerance : +/-10 percent shaft Size : 6 x 10mm/ 0. 24" x 0. 4"(D*l).
• Potentiometer Body Size : 24 x 14mm / 0. 9" x 0. 55"(D * H).
• Screw Thread Dia. : 9mm / 0. 35" Shaft Diameter : 6mm / 0. 24".
• Rotary Knob Size : 15 x 27mm/0. 6" x 1. 1"(H*Max. D).
• Total Size : 40 x 38mm/1. 6" x 1. 5"(Dial d*h).
• package content : 2 x Potentiometer + 2 x A03 knob + 2 x dials.

20KG Digital Servo Full Metal Gear High Torque Aluminium Case Waterproof for Robot DIY Control Angle 180

• 20kg large torque. 20 kg·cm (277.6 oz·in) @ 6.6V. Dimension: 40*20*40.5mm(1.57*0.78*1.59inch).
• Fully sealed waterproof rubber seal ring, can effectively resist moisture..
• Using high-precision potentiometer with new design. Accuracy and linearity have been greatly improved! Accurate movement can satisfy the needs of....
• 180 degree rotation. Controllable angle range from 0 to 180 degrees, Excellent linearity, precision control. Can be rotated within 360 degrees when....

TWTADE / 3pcs wh138 100 ohm Potentiometer Single Turn Rotary Linear Variable Potentiometer +3pcs black Aluminum alloy knob

[2 Pack] DC-DC 5A Buck Converter 4-38V to 1.25-36V Step-Down Voltage Regulator High Power Module with LED Display

• 【High Precision】The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can effectively filter out high frequency noise. Suitable for various electronic projects..
• 【Input Voltage】DC 4V to 38V (input voltage must be 1.5V higher than the output voltage, no boost)..
• 【Output Voltage】DC 1.25V to 36V voltage is continuously adjustable, maximum output current is 5A..
• 【Mini Size】62*38*14 mm (with potentiometer). 2 sets included..
• 【Easy to DIY】Connect to power source, using a mini screwdriver to increase or decrease output voltage by adjusting the screw on the blue potentiometer and monitor voltage with multimeter to get the needed voltage, clockwise to step up voltage and counterclockwise to step-down voltage. (Factory default stays a high voltage, you need to contrarotate about 7-15 circles before the voltage starts ramping down, 1 circle means +/- 1V).

DROK 12v to 5v Buck Converter, LM2596 Adjustable DC Voltage Regulator 4-40V 24V Step-Down to 1.23-37V 12V Volt Reducer Board 3A Power Supply Transformer Module

• Parameters: DROK buck converter input voltage range is DC 4-40V, adjustable output voltage range is DC 1.23-37V, max output current is 3A, conversion rate can up to 92%..
• High Precision Potentiometer: the buck circuit adopts imported BI potentiometer, with high resolution, sensitivity, reliability..
• Output Indicator: the volt transformer board is with a indicator light, which is green and the display is bright, clearly visible and not glare..
• Safe Protection: the step down power supply module is designed with reverse connection protection, over current protection, overheat protection, short circuit protection..
• Note: the dc-dc buck converter can work stably at 3A indoor (Test condition temperature is 29 ℃, and humidity is 50%). If it’s for long time work, it is recommended adding heat sink..

Valefod 10 Pack DC to DC High Efficiency Voltage Regulator 3.2-35V to 1.25-30V Buck Converter DIY Power Supply Step-Down Module

• 【High Precision】The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can effectively filter out high frequency noise. Suitable for various electronic projects..
• 【Input Voltage】DC 3.2V to 35V (input voltage must be 1.5V higher than the output voltage, no boost)..
• 【Output Voltage】DC 1.25V to 30V voltage is continuously adjustable, maximum output current is 3A..
• 【Mini Size】45 * 23 * 14 mm (with potentiometer). 10pcs included..
• 【Easy to DIY】Connect to power source, using a mini screwdriver to increase or decrease output voltage by adjusting the screw on the blue potentiometer and monitor voltage with multimeter to get the needed voltage, clockwise to step up voltage and counterclockwise to step-down voltage. (Factory default stays a high voltage, you need to contrarotate about 7-15 circles before the voltage starts ramping down, 1 circle means +/- 1V).