Categories

Best 35kv Oil Immersed Transformer

3pcs High Voltage Generator DC 6-12V to 1000kV Boost Step-Up Inverter Arc Pulse Generator Power Module High Voltage Transformer (1000 KV)

  • High Voltage Generator:Input Voltage: DC 6V to 12 V.
  • High Voltage Generator Cables: Output Cable Length: About 100mm.
  • Input Cable Length: About 100mm(Red is Positive).
  • High Efficiency: Voltage Generator Modules are Made of a High-Voltage Transformer Through a Circuit of Components and Using the Principle of Tesla Coils , Output High Voltage Pulse,High Efficiency.
  • Easy to Connect:High Voltage Generator come with Input and Output Cables and the Peripheral Circuit is Simple,Just Connect the Cable with the Switch and Battery and the Discharge Intensity is Great.
  • Wide Application: High Voltage Generator Can Be Used for Student Science Experiments, Electronic Instruments,Anion Generators,Science Small Productions and etc..
Check Stock

YBEST Spartan M1 6N2 6P1/6P15 Parallel Tube, Push-Pull 6z4 Tube Integrated AMP Power Amplifier- Soviet 6N1, (4149A030516MKJC63)

  • .Caution: The amplifier must be connected to the speaker before powering on, because the amplifier is an output transformer with a load, Failure to do so will easily burn the output transformer.
  • .Transformer: 96*60 185W ,transformer output : 66*35 15W , 3+2 winding method, new stock imported Nippon Steel 0.35 Z11 slice*2 ,choke coil: 57*25, 4H brand new premium film*1 electronic tube: 6N2*2 / 6P1(6P15)*4 / 6Z4*2 power output: 8W+8W,Frequency response: 20hz-20khz,Output impedance: 4 ohms and 8 ohms,SNR: 90db,Input sensitivity: 500mv-1000mv,Input impedance: 100kΩ,Harmonic distortion: 1% (1khz).
Check Stock

DC High Voltage Generator, Generator Electric Arc Module DC3.6V/4.8V/6V/12V High Voltage Pulse Generator DC 3kV-11kV Super Electric Arc Module for Nebulizers,Electric Guns

  • PORTABLE AND EASY TO USE --- The high voltage transformer generator is small, lightweight and portable.
  • EASY TO USE --- The high voltage generator installation and operation process is very simple, its peripheral circuit is very simple, you only need to connect the switch and battery. You don't have to worry about not using it at all.
  • INPUT VOLTAGE --- The high-voltage arc generator can output high-voltage current, with small size and high efficiency. The input voltage is DC3.6V/4.8V/6V/12V and will output DC3kV-11kV high voltage.
  • WIDE APPLICATION --- The High Voltage P-ulse Generator can be used for electric gun salute, gas stove, etc.
  • GOOD PERFORMANCE --- This module is the finished module of the high-voltage negative ion generator with the help of high-voltage current output and boost power supply module.
Check Stock

Baomain DDS238-4 （30-100）Single Phase DIN-Rail Kilowatt Hour kwh Meter 220V 100A

  • Rate Voltage:220V 230V 240V Rate Current:30(100A).
  • 220V Single Phase DIN-rail Kilowatt Hour kwh Meter.
  • Insulation Performance:AC voltage 2KV for 1 minute,impulse voltage 6KV.
  • Accuracy Class:Class 1 Starting Current:0.4%lb.
  • 35mm standard DIN rail installation,complying with standard DIN EN5002.
Check Stock

YWBL-WH Electronic Components,1000KV High Voltage Pulse Generator Super Arc Pulse Ignition Coil Module

  • This module is the finished module of transformer for small scientific production..
  • The input voltage is DC 3.7-7.4V and can output high voltage of DC 800-1000KV..
  • According to the tesla coil principle, the module outputs high voltage pulse current, small volume and high efficiency..
  • The peripheral circuit is simple (simply connect the switch and install the battery), the discharge intensity is violent..
  • It can be used as high voltage source for high school science experiment, electronic instrument and anion generator..
Check Stock

2 Pack Antronix CMC2002H High Performance 2-Way Coax Cable Splitter 5-1002MHz

  • Works great with: Comcast, Xfinity, RCN, Optimum, Wow, COX, Spectrum, and many more cable providers. Not recommended for Verizon, Direct TV, and Century Link..
  • -45 dBmV Spurious and harmonics after 5 surges of 6 kV ring wave with +55 dBmV return signal.
  • 6 kV ring with surge protection. Eclipse Contact Technology (ECT) F-Port. Digital Broadcast, HDTV and MoCa Ready.
  • Flat 1002 MHz bandwidth with minimal insertion loss. 35 dB return output return loss and 40 dB port-to-port return band isolation..
  • Capacitively coupled F ports. SCTE compliant F-ports with 1-inch port spacing. 100% welded back.
Check Stock

BETAFPV 4pcs 0802SE 19500KV Brushless Motors FPV RC Motors for 1S Brushless Micro Whoop Drone

  • 【Wire connection】Using ball bearing, its motion is more smooth and more durable. The lead wire soldered with the PCB, which allows customer to....
  • 【Compatible Drone】The 0802 1950KV brushless motor is customized for Beta65X, which supports 2S brushless whoop drones. It is powerful and....
  • 【Props&Frames】BETAFPV 0802 19500KV 2S brushless motor is suitable for 31mm 3 or 4 blades propellers with 1.0mm shaft hole and brushless frames....
  • 【Weight&Cable】Only weighs 2.03*g/pc with 35mm Micro JST-1.25 3-Pin connector. Supports 7.4V voltage.
  • 【Support】If you have any technical support needed please feel free to contact us..
Check Stock

Neon Signs Transformer Lichtenberg Machine Wood Burning Machine Power Supply for Glass Neon Sign Electronic Neon Light Beer Signs Bar Lights Transformer 120V 50/60Hz

  • Model: HB-11010 , Overall size(LxWxH): 166x66.5x54.5mm (6.53x2.62x2.15in).
  • The transformer can be used for general size of real glass neon light signs from 24" to 32"..
  • Brand new from factory with high quality. With On/Off switch on the cable making much easlier to be controlled. It can be used in glass neon light sign in US, Canada with US standard Plug..
Check Stock

JAMRC Car Truck Buggy Brushless rc car 75+km/h 1 12 Wltoys rc car 124017 ver 2 High Performance Tunable Ready to Race RTR

  • [2845- 4300KV Brushless Motor] - The car comes with a 2845- 4300KV Brushless motor. It is super fast! Leave the others in the dust on road, off road,....
  • [Zinc Alloy Gear Set and Drive Shaft] - Engineered to last, the gears and drive shaft are composed of Zinc Alloy for wear resistance. It is made to....
  • [Aluminum Chassis and Shock Mounts] - Light weight and strong Aluminum chassis provides an extra strong base to prevent cracks and wear during....
  • [4x4 Wheel Independent Oil Shocks] - Real oil shocks made to effectively reduce vibration and/or bounce and keep the car sticking to the road. Keep....
  • [2.4Ghz Radio Frequency Control] - (blue controller) 2.4Ghz is great for distances up to ~100m. Its also great for areas with multiple cars in use.....
Check Stock

Loulensy AC Voltage Transducer Voltage Sensor Transmitter Transformer Input 0-300V AC Output 0-5V DC

  • Working Stability: annual change 003c 0.2%.
  • Impulse Voltage:5KV(peak value),1.2/50uS.
  • Load Capacity: 2 times current continuous.
  • Storage Environment:-40 to +115 degress Centigrade,20%-95% without condensation.
  • Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
  • Power Supply(defaulted):24V DC +/-15% (If 15V or 12V needed,please leave a message).
  • Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
  • Working Environment:-25 to 80 degrees Centigrade,20%-90% without condensation.
  • Isolation Resistance:20M Ohm(DC500V) or above.
  • Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).
Check Stock

Loulensy AC Voltage Transducer Voltage Sensor Transmitter Transformer Input 0-400V AC Output 0-5V DC

  • Working Stability: annual change 003c 0.2%.
  • Impulse Voltage:5KV(peak value),1.2/50uS.
  • Load Capacity: 2 times current continuous.
  • Storage Environment:-40 to +70 degress Centigrade,20%-95% without condensation.
  • Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
  • Power Supply(defaulted):24V DC +/-15% (If 15V or 12V needed,please leave a message).
  • Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
  • Working Environment:-10 to 50 degrees Centigrade,20%-90% without condensation.
  • Isolation Resistance:20M Ohm(DC500V) or above.
  • Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).
Check Stock

Loulensy AC Voltage Transducer Voltage Sensor Transmitter Transformer Input 0-150V AC Output 4-20mA DC

  • Working Stability: annual change 003c 0.2%.
  • Impulse Voltage:5KV(peak value),1.2/50uS.
  • Load Capacity: 2 times current continuous.
  • Storage Environment:-40 to +70 degress Centigrade,20%-95% without condensation.
  • Isolation Withstanding Voltage:AC 2.0KV/min*1mA between input/output/power.
  • Power Supply(defaulted):24V DC +/-15% (If 15V or 12V needed,please leave a message).
  • Feature:Voltage Terminal Insert,standard din rail(35mm)mounting or pannel mounting.
  • Working Environment:-10 to 50 degrees Centigrade,20%-90% without condensation.
  • Isolation Resistance:20M Ohm(DC500V) or above.
  • Capacity Max:0-500V AC (Customerized,contact operator if you need other input ranges,e.g.0-75mV or 0-300V).
Check Stock

HAPPYMODEL 4PCS EX1103 1103 6000KV 7000KV 8000KV 12000KV 2-4S Brushless Motor CW CCW for Sailfly-X Larva X Toothpick RC Racing Drone FPV Models CW 7000KV

  • KV Options: 6000KV 7000KV 8000KV 12000KV.
  • CW (Red Cable) and CCW (Black Cable) Optional.
  • No. of Cells(Lipo): 6000KV Support 3-4S 7000KV Support 2-3S original motors for Larva X 8000KV Support 2-3S 12000KV Support 1-2S.
Check Stock