Categories

Best 360 degree Angle Gauge

Digital Angle Finder Protractor 0-360 Degree T-Bevel Gauge & Protractor with Horizontal Vertical Bubble & Full LCD Display for Woodworking Metalworking Construction

  • High Accuracy：This digital angle finder allows a full range 0-360°to measure internal angle，external angle & Contra angle Measuring precision is ±0.5°, resolution is 0.05° .You can switch between degrees and minutes to Improve the measurement accuracy , meet your requirements for different accuracy..
  • Four Large Control Buttons: Pressing hold button on the digital angle finder to hold the measurement at any angle, it helps the users effectively record the angle values. In addition, including power on/off, read reverse angle, flip display, and clear readout..
  • Digital Sliding T-bevel: Turn the center knob to lock the angle, and use the protractor to copy any angle from 0 to 360 degrees, In addition, easily get 45 degree angle with a T bevel gauge..
  • LCD Display & Bubble Level: This highly protractor tool is equipped with a large LCD display for easy reading and integrates a steel locking knob for adjustment. There is a perfectly positioned bubble level on the end of the digital angle finder body to ensure the level before tracing any angles and making any cuts..
  • Worry Free Customer Service: We back each T bevel gauge with a free 1 year exchange service plus lifetime technology support, giving you complete peace of mind. Please don’t hesitat....
Check Stock

GEARWNCH 1/2\ Drive Electronic Torque Wrench 30-340 Nm -85077

  • 1/2 inch torque wrench angle gauge tool, suitable for many new engines using torsion yield fasteners..
  • The 360 degree scale is marked in 2 degree increments of 10 degrees and 1 interval of 30 degrees.
  • Turn the tool housing to easily reset it to zero for the next use.
  • The adjustable arm keeps the angle scale fixed..
  • Male and female square drivers with 1/2 inch.
Check Stock

Digi-Pas DWL200 Electronic Torpedo Level, Protractor, Angle Gauge, Angle Finder, Bevel Gauge, Magnet, 0.1°, 7 inch

  • DUAL FUNCTIONS - tilt/angle gauge to set and also check relative angles between two surfaces using Alternate Zero function.
  • EASY USER RE-CALIBRATION back to factory setting with no special fixture required.
  • RESOLUTION: ±0.1° (0° & 90°), ±0.2° for 1° to 89°, switchable display between degrees (°) or slope (%).
  • STRONG MAGNETIC BASE: securely attach to fences, saw blade & base, and other metallic surfaces.
  • improve accuracy with precise displays in degrees, In/Ft, mm/M, % slope.
  • Auto invert display when gauge is upside down . BUZZER SOUNDS at 0 degree and any set angle.
  • HOLD BUTTON to allow user freezing display for ease of reading. Measurement Range 0° ~ +/- 90° x 4 (360°).
Check Stock

HomeSoGood Angle Meter, Torque Angle Gauge For Torque Wrench 360 Degrees Adjustable Easy To Read Measurer Car Garage Tool

  • Torsion angle gauge scale is 0-360 degrees, 1/2'' drive ratchet handle..
  • Torque Meter is made of sleeve and outer casing durable plastic, which is durable and not easy to be damaged..
  • It is a special tool for angle torque gauges. It is used for torque wrench 1/2 torque gauge..
  • Torsion angle gauge adjustable arm has 2 different length, flexible to use. for torque wrench 1/2 drive..
  • It is convenient for adjustment and can be used in many occasions. It is widely used for our next reuse..
Check Stock

PREXISO Angle Gauge Magnetic, Angle Finder - Digital Level Electronic, Protractor Angle Cube Inclinometer for Woodworking, Table Saw, Construction, Masonry, Machinery, 0-360° Bright Backlit Display

  • 2 Measurement Modes & 4 Units – Turn on the equipment to directly enter the ABSOLUTE measurement mode, and press the ZERO button to switch to the RELATIVE measurement mode.
  • This equipment fast measurement displays angles in degrees, %, mm/m and IN/FT.
  • Magnetic V Groove Base & Auto Reversible Display – The pocket angle finder features sturdy V groove edges, a strong magnetic base.
  • When upside down, the LCD display with backlight auto rotates, ensure fast and clear reading.
  • TIPS: If the angle gauge is used in an incorrect position (tilts diagonally over 30 degree), screen display ERROR to remind users to use correctly.
  • Accurate Angle – This angle finder tool measures, sets angles, and if a surface is level.
  • PREXISO angle gauge has higher resolution of 0.05°and higher accuracy of ±0.1°at 0°and 90 °, and ±0.2°at other angles.
  • The measuring range is 0 to 360° (4×90°), buzzer will alert when it’s within ± 1° to the horizontal or vertical position.
  • Compact Design & Calibration Function – Mini angle gauge fits in your pocket or the storage bag that comes included to protect the equipment surface from wear.
  • The equipment has been calibrated in the factory. In order to ensure lasting accuracy, the equipment also has calibration function, so ....
Check Stock

General Tools 102 0-Inch to 1-Inch .001-Inch Graduation Micrometer

  • 【Material】- This Angle gauge set is made of high quality stainless steel, high hardness, and durable in use..
  • 【Parameter】- 60 Degree cutting tool for the inspection of tooth‑shaped 55 degree angle and metric thread and inch thread, and also it can measure blade angles..
  • 【Comprehensive Angle Range】- This set of drill bits gauge has a comprehensive angle range: 60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 ° and 160 °..
  • 【Suitable Utilization】- Diameter drill front edge of the protractor 50 gauge 118 ° angle twist drills grinding gauge is suitable for 118 ° diameter of less than 50mm grinding twist drills..
  • 【Professional Measurement Tool】- This is a practical set of angle gauge set in drill bits angle measuring and drill sharpener inspection..
Check Stock

Drill Angle Gauge, 3Pcs Drill Bits Angle Gauge Set Dirll Sharpener Tools S/S Angle Measuring Gage Drill Bit Angle (60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 °, 160 °)

  • 【Material】: This Angle gauge set is made of high quality stainless steel, high hardness, and durable in use..
  • 【Design】: It is a practical Angle gauge set in drill bits Angle measuring and drill sharpener inspection,and comes with a case, convenient for carrying out..
  • 【Feature】: Diameter drill front edge of the protractor 50 gauge 118 ° apex angle of twist drills grinding gauge suitable for 118 ° apex diameter of not more than 50mm of grinding twist drills..
  • 【Drill Apex Angle】: Check the drill apex angle (60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 °, 160 °). Cutting tool angle is 60 degrees for a tooth-shaped angle 55 degree angle and metric thread, inch thread inspection, blade and special measuring tools for measuring angles.
  • 【Usage】: Suitable For: Angle measurement.
Check Stock

Angle Gauge Drill Bits, 3Pcs S/S Angle Gauge Measurement Drill Sharpener Tool Set Including Drill Diameter, Drill Bits and General Angle Gauge with Case

  • Professional Measurement Tool: This is a practical set of angle gauge set in drill bits angle measuring and drill sharpener inspection.
  • Professional and Standard Parameters: 60 Degree cutting tool for the inspection of tooth‑shaped 55 degree angle and metric thread and inch thread, and also it can measure blade angles.
  • Comprehensive Angle Range: This set of drill bits gauge has a comprehensive angle range: 60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 ° and 160 °.
  • Suitable Utilization: Diameter drill front edge of the protractor 50 gauge 118 ° angle twist drills grinding gauge is suitable for 118 ° diameter of less than 50mm grinding twist drills.
  • Durable for Long-Time Use: Made of high quality stainless steel, this set of angle gauge has high hardness, and it is durable for long-time use.
Check Stock

BOSCH Digital Level, 24 Inch. GIM 60

  • DUAL FUNCTIONS - tilt/angle gauge to set and also check relative angles between two surfaces using Alternate Zero function.
  • PRECISION & EASY RE-CALIBRATION by user back to factory setting with no special fixture.
  • RESOLUTION: ±0.05° (0° & 90°), ±0.2° other angles, switchable display between (°), slope (%), mm/M, inch/FT.
  • STRONG MAGNETIC BASE: securely attach to fences, saw blade & base, and other metallic surfaces.
  • improve accuracy with precise displays in degrees, In/Ft, mm/M, % slope.
  • Auto invert display when gauge is upside down.
  • Measurement Range 0° ~ +/- 90° x 4 (360°) with full temperature compensation ensuring accuracy of measurements within 32°F to +122°F.
Check Stock

Proster 200mm 360°Angle Finder Data Hold LCD Angle Ruler One Key Zeroing 80mm 3 1/8\ Magnetic Height Gauge Depth Gauge for Woodworking Construction Home Decoration

  • 【Accurate Angle Finder】200mm stainless steel ruler to measure length (metric and imperial), 360°angle sensor for relative and absolute angle measurement inside and outside, Range:0-360°,Resolution：0.05°,Accuracy：±0.3°,Repeatability：0.05°..
  • 【One-key Data Hold & Zero Reseting】Knob locked one-key data hold function for both angle/depth gauge to hold the angles/depth measured at any time.
  • Zeroing reset button at any angle for relative measuring..
  • 【Multi-function Magnetic Height Gauge】3-In-1 Height/Depth/Thickness Gauge,easy to measure bore/slot depths with plunger, one key mm/inch/fraction switch, range: 80mm, resolution: 0.05mm, accuracy: 0.10mm for routers horizontal/vertical measure with self standing magnetic feet..
  • 【LCD Display & Stainless Steel】Sturdy plastic thickness gauge for with quick-reading digital LCD display, harden stainless steel angle finder ruler and depth ruler provides lifelong service..
  • 【Wide Applicatoion】This angle finder with magnetic height depth thickness gauge is especially designed for Woodworking, Construction, Home Decoration, Table saws, Hand Routers, Etc..
Check Stock

Digital Angle Finder, farway 2 in 1 Digital Protractor, 7Inch / 200mm Stainless Steel Digital Angle Ruler with LCD Display for Woodworking/Carpenter/Construction Tool (Battery Included)

  • 【Stainless Steel Digital Protractor】The stainless steel material is hard and durable, which can prolong the service time of this protractor. Laser etched measurements offer clear reading and years' usage..
  • 【High Accuracy & 360° Measurement Measure Angles Tool】Accuracy of this digital angle gauge is ±0.3 degree. The ruler supports measurement between metric(mm) and imperial(inch), makes it can measure length (0~200 mm/0~7 inch) convenient and accurately.Hinge mechanism on the angle rule allows a full range of 0 to 360-degrees to measure inside outside and reverse angles..
  • 【Angle Finder with LCD Display & Locking Function】Angle Finder Protractor comes with a large easy-to-read LCD display. For read it easily, this woodworking tool could be locked at any angle,and has zeroing button to reset angle finder tool at any time. It also comes with a Reverse Function Button, When you measuring large angle and doing reverse measurement,the display could read up-side-down.The function of automatic shut-off after 6 min saves energy of the battery..
  • 【Easy Operation & Wide Application Angle Protractor 】Many uses, for example as miter saw protractor or for checking angle of blade on table saw or accuracy of miter saw, making angle cuts or measuremen....
Check Stock

POWERTEC 71143 Deluxe Miter Gauge for Table Saw | Miter Guide with 120 Angle Stops

  • Function: a high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts.
  • Features: a lightweight design with a durable laser-cut aluminum construction, Large gauge handle, universal fence mounting bracket pivoting locking mechanism, A removal plate that allows the miter gauge to be used with t-slotted and non t-slotted miter slots, and adjustable Expansion discs that remove all side play from the bar, creating a perfect fit.
  • Precision: angle guide (with 120 total angle stops) in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts.
  • Universal design:suited for most standard miter slots (3/4” width x 3/8” depth) with or without T-slots, making it compatible with popular Brand table saws, band saws, Router tables, disk and belt sanders.
Check Stock

Longacre 52-53097 0-100 PSI Digital Tire Pressure Gauge

  • This digital tire inflator gauge features a 2" face with large easy-to-read numbers and includes a shock-resistant, protective bumper for long life.
  • The 360 degree swivel chuck allows for the digital display to be viewed clearly from any angle and a ball chuck is also included for added convenience.
  • The handy design is equipped with a built-in air bleeder valve to reduce pressure in overinflated tires and includes a sturdy 14" flexible hose.
  • Maintain your tire pressure with confidence - this 0-100 psi air gauge reads to .2 psi with .8% accuracy and consistent results each time.
  • Properly inflated tires save fuel, last longer, and increase the handling and performance of your street car, race car, truck, motorcycle, or bike.
Check Stock