Signature Hardware 948495 Cypress 34\ Undermount 60/40 Double Basin Stainless Steel Kitchen Sink
- Boasting a highly functional design, the 32” Cypress double-bowl sink features a large basin for washing dishes and a smaller basin for prep work. A low center divide allows for large pots and pans to be maneuvered easier. This product is made of durable, 304-grade stainless steel to handle all your demands. On the bowl's underside, sound absorption pads dampen noise made by running water and cleaning dishes, while the undercoating prevent condensation buildup in the cabinet below..
- Covered under Signature Hardware's limited lifetime.
- Undermount installation – sink will install under the counter top.
- It is recommended to have the sink at the job site before cutting cabinet or counter top.
- Sound absorption pads on the underside of sink.
- Has an undercoating to prevent condensation buildup.
- Basin Dimensions (Left): 18-1/4" L x 19" W x 9" D.
- Basin Dimensions (Right): 12-1/8" L x 19" W x 9" D.
Check StockStarstar Sinks Protector Top Quality Stainless Steel Kitchen Sink Bottom Grid Rack 27.1/2 x 15.11/16 x 1
- How to measure a correct of grid for your sink! You have to measure inside bottom of your sink to get the right size of grid..
- Not top inside of sink. Usually inside top of sink 1 inches shorter than inside bottom of your sink.
- Designed to conveniently fit into the bottom of the compatible kitchen sink.
- Safeguards your fragile dishes and protects the enameled surface of your sink.
- Soft Protective Bumpers Prevent Scratching.
Check StockSignature Hardware 948475 Sitka 25\ Drop In or Undermount Single Basin Stainless Steel Single Hole Kitchen Sink
- Ideal for a busy kitchen, the 25" Sitka stainless steel sink can handle the demands of frequent use. On the bowl's underside, sound absorption pads dampen noise made by running water and maneuvering dishes, while the undercoating prevent condensation buildup in the cabinet below. A pre-drilled mounting hole on the back rim accepts your choice of single-hole faucet..
- Covered under Signature Hardware's limited lifetime.
- Dual installation – sink can be installed under the counter top or be dropped into a cutout in the countertop.
- It is recommended to have the sink at the job site before cutting cabinet or counter top.
- Sound absorption pads on the underside of sink.
- Has an undercoating to prevent condensation buildup.
- Basin Dimensions: 22-1/4" L x 17" W x 10" D.
Check StockStarstar Sinks Protector Top Quality Stainless Steel Kitchen Sink Bottom Grid Rack 32.11/16 x15.11/16 x 1
- How to measure a correct of grid for your sink! You have to measure inside bottom of your sink to get the right size of grid..
- Not top inside of sink. Usually inside top of sink 1 inches shorter than inside bottom of your sink.
- Designed to conveniently fit into the bottom of the compatible kitchen sink.
- Safeguards your fragile dishes and protects the enameled surface of your sink.
- Soft Protective Bumpers Prevent Scratching.
Check StockStarstar Sinks Protector Top Quality Stainless Steel Kitchen Sink Bottom Grid Rack 29.11/16 x 15.11/16 x 1
- How to measure a correct of grid for your sink! You have to measure inside bottom of your sink to get the right size of grid..
- Not top inside of sink. Usually inside top of sink 1 inches shorter than inside bottom of your sink.
- Designed to conveniently fit into the bottom of the compatible kitchen sink.
- Safeguards your fragile dishes and protects the enameled surface of your sink.
- Soft Protective Bumpers Prevent Scratching.
Check Stock
Signature Hardware 948492 Calverton 32\ Drop In or Undermount 40/60 Double Basin Stainless Steel Kitchen Sink
- Featuring a large basin for washing dishes and a smaller basin for prep work, the 32” Calverton Double-Bowl Sink is functionally designed. This product is made of durable, 304-grade stainless steel to handle all your demands. On the bowl's underside, sound absorption pads dampen noise made by running water and maneuvering dishes, while the undercoating prevent condensation buildup in the cabinet below..
- Covered under Signature Hardware's limited lifetime.
- Dual installation – sink can be installed under the counter top or be dropped into a cutout in the countertop.
- Sink features dual basins with a 60/40 split.
- It is recommended to have the sink at the job site before cutting cabinet or counter top.
- Features a low center divide for maneuvering large pots and pans.
- Sound absorption pads on the underside of sink.
- Has an undercoating to prevent condensation buildup.
- Sink Length: 31-3/8" (from left to right).
- Sink Width: 20-3/8" (from front to back).
- Basin Dimensions (Left): 13-1/2" L x 15-5/8" W x 7-1/2" D.
- Basin Dimensions (Right): 14-7/8" L x 18-1/4" W x 10" D.
Check StockStarstar Sinks Protector Stainless Steel Kitchen/Yard/Bar/Laundry/Office Bottom Protector Grid, Rack For The Sink (16' x 14')
- How to measure a correct of grid for your sink! You have to measure inside bottom of your sink to get the right size of grid.
- Not top inside of sink. Usually inside top of sink 1 inches shorter than inside bottom of your sink.
- Designed to conveniently fit into the bottom of the compatible kitchen sink.
- Safeguards your fragile dishes and protects the enameled surface of your sink.
- Soft Protective Bumpers Prevent Scratching.
Check StockStarstar Sinks Protector Stainless Steel Kitchen/Yard/Bar/Laundry/Office Bottom Protector Grid, Rack For The Sink (15' x 13')
- How to measure a correct of grid for your sink! You have to measure inside bottom of your sink to get the right size of grid.
- Not top inside of sink. Usually inside top of sink 1 inches shorter than inside bottom of your sink.
- Designed to conveniently fit into the bottom of the compatible kitchen sink.
- Safeguards your fragile dishes and protects the enameled surface of your sink.
- Soft Protective Bumpers Prevent Scratching.
Check Stock
Signature Hardware 948490 Calverton 30\ Drop In or Undermount Single Basin Stainless Steel Kitchen Sink
- The 30” Calverton Stainless Steel Sink features easy-to-clean, rounded corners within its sizable bowl. This durable basin is made of 304-grade stainless steel that requires very little maintenance. On the bowl's underside, sound absorption pads dampen noise made by running water and maneuvering dishes, while the undercoating prevent condensation buildup in the cabinet below. A rear-center drain location provides more room for food preparation or dish cleaning without blocking the drain..
- Covered under Signature Hardware's limited lifetime.
- Dual installation – sink can be installed under the counter top or be dropped into a cutout in the countertop.
- Single basin design for maximum workspace.
- It is recommended to have the sink at the job site before cutting cabinet or counter top.
- Sound absorption pads on the underside of sink.
- Has a undercoating to prevent condensation buildup.
- Sink Length: 29-3/4" (from left to right).
- Sink Height: 10-1/8" (from top to bottom).
- Basin Dimensions: 27-11/16" L x 16" W x " D.
Check Stock
Signature Hardware 948483 Sitka 33\ Drop In or Undermount 60/40 Double Basin Stainless Steel Single Hole Kitchen Sink
- Offering a pair of offset basins, the 33" Sitka double-bowl sink brings separation to your kitchen's workspace. Great for a high-traffic kitchen, this product is made of durable, 304-grade stainless steel. On the bowl's underside, sound absorption pads dampen noise made by running water and maneuvering dishes, while the undercoating prevent condensation buildup in the cabinet below. A pre-drilled mounting hole on the back rim accepts your choice of single-hole faucet..
- Covered under Signature Hardware's limited lifetime.
- Dual installation – sink can be installed under the counter top or be dropped into a cutout in the countertop.
- It is recommended to have the sink at the job site before cutting cabinet or counter top.
- Sound absorption pads on the underside of sink.
- Has an undercoating to prevent condensation buildup.
- Basin Dimensions (Left): 17-1/2" L x 16-5/8" W x 10" D.
- Basin Dimensions (Right): 11-3/4" L x 16-5/8" W x 10" D.
Check StockAncona 30-inch Handmade Prestige Series Double Basin Drop-in Kitchen Sink with Grids and Strainers | 1-Hole 50/50 | Stainless Steel
- 30-Inch Top Mount Kitchen Sink: The Prestige Drop-in stainless steel sink is sculptured to be top mounted and will fit over most dishwashers and other....
- Rear-Drain Position Sink: The rear-drain position gives you more basin space as well as more under-cabinet storage..
- Double Square Bowl Sink: This Ancona top mount sink with satin-finished square-shape bowls uses the most of your valuable space while maintaining a....
- Stainless Steel Sink: Meticulously crafted from 304 stainless steel, 18-Gauge, the premade faucet hole allows precise installation with a beautiful....
- Product Dimensions: Outer dimensions (L x W x H): 76.2 cm x 48.26 cm x 25.4 cm (30 in. x 19 in. x 10 in.).
- Bowl dimensions (L x W x H): 33 cm x 35.3....
Check Stock
Signature Hardware 948481 Sitka 33\ Drop In or Undermount 60/40 Double Basin Stainless Steel 4-Hole Kitchen Sink
- The 33" Sitka double-bowl sink has offset basins that provide separate working spaces. Great for a high-traffic kitchen, this product is made of durable, 304-grade stainless steel. On the bowl's underside, sound absorption pads dampen noise made by running water and maneuvering dishes, while the undercoating prevent condensation buildup in the cabinet below. Four pre-drilled mounting holes on the back rim accepts your choice of widespread faucet with a side spray..
- Covered under Signature Hardware's limited lifetime.
- Dual installation – sink can be installed under the counter top or be dropped into a cutout in the countertop.
- It is recommended to have the sink at the job site before cutting cabinet or counter top.
- Sound absorption pads on the underside of sink.
- Has an undercoating to prevent condensation buildup.
- Basin Dimensions (Left): 17-1/2" L x 16-5/8" W x 10" D.
- Basin Dimensions (Right): 11-3/4" L x 16-5/8" W x 10" D.
- Faucet Centers: 8" (distance between the installation holes for the faucet handles).
Check Stock
Signature Hardware 948486 Ortega 33\ Drop In or Undermount 50/50 Double Basin Stainless Steel 4-Hole Kitchen Sink
- Designed for a busy kitchen, the 33" Ortega double-bowl sink has evenly split basins that provide separate working spaces. This product is made of durable, 304-grade stainless steel. On the bowl's underside, sound absorption pads dampen noise made by running water and maneuvering dishes, while the undercoating prevent condensation buildup in the cabinet below. Four pre-drilled mounting holes on the back rim accepts your choice of widespread faucet with a side spray..
- Covered under Signature Hardware's limited lifetime.
- Dual installation – sink can be installed under the counter top or be dropped into a cutout in the countertop.
- It is recommended to have the sink at the job site before cutting cabinet or counter top.
- Sound absorption pads on the underside of sink.
- Has an undercoating to prevent condensation buildup.
- Basin Dimensions (Left): 14-5/8" L x 16-5/8" W x 9" D.
- Basin Dimensions (Right): 14-5/8" L x 16-5/8" W x 9" D.
- Faucet Centers: 8" (distance between the installation holes for the faucet handles).
Check Stock
