Categories

Best 3d Printer Build Surfaces

DOBSTFY 3D Printing Build Surface 3D Printer Heat Bed Platform Sticker Sheet 8 x 8 200x200mm Square - Pack of 4

  • 【PACK of 4】This 200x200mm (8"x8") Build Surface for Anet A8 WanHao i3 Detachable 3D Printers DYI, square, fully matches heated bed on many popular....
  • 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature....
  • 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides....
  • 【Fully Compatibly】 This 3D Printer heatbed platform sheet allows for multiple uses with either the same or different filament material. Compatible....
  • 【SATISFACTION GUARANTEED】We're so confident that you'll love these premium print surfaces, that we offer lifetime technical support and 24 hours....
Check Stock

3D Printing Build Surface, 3D Printer Heat Bed Platform Sticker Sheet, 12' x 12' Square with Premium Adhesive for CR-10 / CR-10S,Hictop CR-10, Hictop Hero d3 3D Printers 310x310MM (Pack of 4)

  • ... either the same or different filament material. Compatible with ABS, PLA, HIPS, PET+, brick, wood, and flexible (TPE) filaments. Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results..
  • 【SATISFACTION GUARANTEED】We’re so confident that you’ll love these premium print surfaces, that we offer lifetime technical support and 24 hours professional customer service..
Check Stock

Geeetech JT16 PVP Solid Glue Stick, 6pcs/Set,36g,for 3D Printer Hot Bed,Quick Dry,Easy to Stick and Washable,Green Tube

  • ...rcomes warping issues in 3D printing, helps 3D printed parts stick to the build plate during printing, and makes the finished model easy to release. High-capacity and reusable, enabling multiple prints with minimal usage..
  • 【Excellent Adhesion】Solid form viscosity, high viscosity formulation, good adhesion to all surfaces and impermeability. Very stable after pasting, wrinkle-free and smooth bottom. Its water solubility, dispersion stability and thickening properties can make up for various shortcomings of liquid glue and PVA glue. Leading the way in advanced adhesives in the 3D printing industry, gradually becoming a must-have for 3D printing..
  • 【Easy To Use And Clean】Swivel bottom design, lightweight and portable, easy to use and store. Simply apply the glue lightly to the active print area without covering the entire surface. This solid glue stick spreads smoothly and dries quickly. After drying, it can be washed with water or wiped off with a towel..
  • 【Wide Compatibility】Compatible with almost all 3D printer heated beds, suitable for any DIY or craft project, enough for everyday needs. It is recommended to close the cap after each use to prevent the glue from drying out..
Check Stock

3D Printer Glue Sticks, FENGWANGLI 4 Pieces Solid Adhesive for Hot Bed Print Filament PLA Glass ABS PETG CPE

  • ▌Compatibility: 3D printer glue perfect for all 3D printer hot bed, include build surface sheet plate, aluminum and glass plate,PEI, 3D printer stickers, Kapton etc..
  • ▌Easy to Use : You just need to twist 3D printer adhesive up, spread on an active printing area only, no need to cover the whole surface.
  • ▌Easy to Clean: 3D printer glue stick with water soluble formula, you can just clean it with water after drying.
  • ▌Multi-function: 3D printer bed adhesive not only for 3D Printing, but also for arts and crafts, school projects, and more.
  • ▌Long-lasting: PLA glue Lasts for 100+ average prints.
Check Stock

ANYCUBIC Mega X FDM 3D Printer and ANYCUBIC PLA 3D Printer Filament(Grey + Black) Bundle

  • ① ANYCUBIC MEGA X 3D Printer, Large Metal FDM 3D Printer with Patented Heatbed and 1kg PLA Filament, Build Size 11.81in(L) X 11.81in(W) X 12in(H).
  • ② ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Grey.
  • ③ ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Black.
Check Stock

Outus 3D Printer Glue Sticks PVP Solid Glue Sticks for 3D Printer Hot Bed Removing Printing Models(6 Pieces)

  • Packaging upgrade: In order to more reflect the sense of design, have optimized and upgraded the appearance of the product. The outer packaging of the product purchased may be blue. promise that the quality of the products be the same as before, but with Upgraded packaging..
  • Safe and long-lasting: these 3D printer glue sticks are made of quality PVP material, non-toxic and acid-free, will not hurt people's body, they come with high viscosity formula and have nice adhesion to hot plate or hot bed, easy to remove the printing models, suitable for the first layer before printing.
  • 1 piece of glue stick can last for more than 100 average prints, practical to help 3D print parts adhere to the build plate during printing.
  • Easy to use and clean: these PVP solid glue sticks can be easily applied with flat or straight objects, such as ruler, ID card, glass plate and so on, just lightly apply glue to the area of the printing bed being applied, only in the effective printing area, no need to cover the entire surface.
  • The 3D printer build plate is easily cleaned with water after cooling down.
  • Compatibility: these 3D printer glue sticks are compatible with all 3D printer heated bed, including build surface sheet plate, aluminum and glass plate and so on, bring a nice....
Check Stock

15g 3D Printer Glue Sticks, Aitrip 2Pcs Solid Stickers for 3D Printer Hot Bed Print Filament PLA ABS PET PETG and Other More

  • ▌Compatibility: 3D printer glue perfect for all 3D printer hot bed, include build surface sheet plate, aluminum and glass plate,PEI, 3D printer stickers, Kapton etc..
  • ▌Easy to Use : You just need to twist 3D printer adhesive up, spread on an active printing area only, no need to cover the whole surface.
  • ▌Easy to Clean: 3D printer glue stick with water soluble formula, you can just clean it with water after drying.
  • ▌Multi-function: 3D printer bed adhesive not only for 3D Printing, but also for arts and crafts, school projects, and more.
  • ▌Long-lasting: PLA glue Lasts for 100+ average prints.
Check Stock

MakerBot Replicator + 3D Printer with swappable Smart Extruder+ Black MP07825EU

  • Your purchase includes One MarkerBot Replicator, One 3D Printer with swappable Smart Extruder+ in Black, 1 PLA spool, 1 flexible build plate, power....
  • Item's dimensions – 17.4" W x 20.8" L x 16.2"H | Build volume – 7.6” W x 11.6” L x 6.5” H / 573 Cubic inches | Power requirements –....
  • Works with MakerBot PLA Material - Large Spool, Small Spool & MakerBot Tough Material - Large Spool, Additional materials such as bronzefill,....
  • The only 3D printer tested by NIOSH for environmental safety in the classroom or office space.Aluminum Casting and Extrusions for Motion Components.
  • Winner of PC Mag Editor’s Choice Award, iF Design Award, Techcrunch best Classroom 3D printer.
Check Stock

Glass Bed, Upgraded 3D Printer Platform Tempered Glass Plate Build Surface Cover for Anet A8 /A6/ A2/ ET4 (220x220x4mm)

  • BED MATERIAL-100% Genuine Borosilicate Glass is coated with inorganic microporous coating and has a hardness of 8 Mohs, heat resistance up to 400 ℃..
  • BUILD SURFACE TEMPERATURE SETTINGE- PLA: 50-70ºC TPU: 50-70ºC ABS: 100-125ºC (recommended 110ºC) PC: 100-130ºC (120ºC is recommended) Nylon: 90-120ºC (110ºC is recommended) PP: 100-130ºC (120ºC is recommended) PETG: 50-70ºC.
  • SIZE&COMPATIBILITY-Build Surfaces have 4 different size to choose 220x220x4mm Works for Anet A8 /A6/ A2/ ET4,235x235x4MM Works for CREALITY Ender3 300x300x4MM Works for Anet E12 E16 A8PLUS ET5 Artillery SW-X1 310x310x4MM Works for CREALITY CR10.
  • NO EDGE CURLING - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts..
  • QUANLITY ASSURANCE-All products in this shop provide free lifetime service.
Check Stock

3D Printer Build Plate Adhesive Glue Sticks 【Bulk 1.26 OZ/ea】on Glass/PEI/Metal/Ruber/Sticker Hot Bed Platform - High-Heat Resistant Perfect Fist Layer Adhesion for PLA, TPU, PETG (3-Pack) (3-PK)

  • 【Perfect First Layer Adhesion】It significantly reduces spaghetti, blobs, warping and all ahesion related common 3D printing issues..
  • 【Made for Multiple 3D printing Surfaces】Works for all FDM 3D Printers surface - Glass, PEI, Alumium, Kapton, Tapes etc.
  • 【High Temperature Lasting】Perfect for 200° to 300° 3D printing nozzles..
  • 【Easy to Use】Simply level the bed, apply on the build area and ready to work. Easy application, Easy release, Easy clean, Non-toxic, Acid-free, washes off 3D Printer build plate easily with water.
  • Durable: each glue stick contains 21g/0.74ounce of white glue, twist up for access to more as needed, can last use for 100+ average prints..
Check Stock

Dremel DigiLab 3D45-01 3D Printer with Filament - Heated Build Plate & Auto 9-Point Leveling - PC & MAC OS, Chromebook, iPad Compatible - Nylon, ECO-ABS, PETG, PLA Print Capable

  • ADVANCED 3D PRINTING: The Dremel Digilab 3D45 Idea Builder 3D printer is one of the best 3D printer options for printing advanced materials. It is ECO-ABS, Nylon, PETG and PLA filament friendly, and with an all-metal 0.4 mm nozzle that heats up to 280°C and a removable glass build plate that heats up to 100°C, you can print almost any 1.75mm filament with ease..
  • BEST IN CLASS: The winner of PCMag.com’s 2022 Editors’ Choice Award for Best 3D Printer for Professionals and Small Businesses, a Google For Education Partner, and built to withstand daily use, the Dremel 3D45 3D Printer Kit is the ideal purchase for architecture, engineering, university use, or commercial 3D printers..
  • EASY TO USE: Our guided setup process gets you from unboxing to printing in just a few minutes. The 4.5 inch full color touchscreen has an intuitive interface so you can quickly navigate through different functions, and the built-in RFID reader detects the 1.75mm Dremel filament that you place inside and automatically chooses the best print settings for you..
  • TOP RATED FEATURES: Features include an automated 9 point leveling sensor that detects any variation in the print bed and automatically accounts for it for more successful printing, a built-in HD camera for remote prin....
Check Stock

Creality Ender 3 Glass Bed Upgraded Build Surface Plate, 235x235x4mm

  • No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts..
  • No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing..
  • Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model..
  • Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature..
  • Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer..
Check Stock

ANYCUBIC Kobra Max 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Matte Black) Bundle

  • ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, Matte Black.
  • Large Build Size: ANYCUBIC Kobra Max 3D Printer comes with a large build volume of 17.7 x 15.7 x 15.7 in. / 45 x 40 x 40 cm, which is enough for daily and household using, providing you larger printing space and more choices of creation..
  • Self-developed Anycubic LeviQ Leveling Function: Anycubic upgrade auto leveling function with a 25-point smart and precise calibration. It can compensate the heated bed unevenness automatically. Leveling and printing can be completed with one button, simple operation and brings you greater printing experience..
  • Stronger Construction & Higher Precision: ANYCUBIC Kobra Max 3D Printer is equipped with double thread Z-axis moving construction. It can minimize the shaking, does not lose steps and more model details can be restored.
  • Filament Runout Detection: Equipped with a filament runout sensor, it can monitor the supply of filament intelligently. If your printer runs out of filament, it will stop automatically without losing your printing progress..
Check Stock