Categories

Best 3d Printer For Rc Body

Outus 3D Printer Glue Sticks PVP Solid Glue Sticks for 3D Printer Hot Bed Removing Printing Models(6 Pieces)

  • Packaging upgrade: In order to more reflect the sense of design, have optimized and upgraded the appearance of the product. The outer packaging of the product purchased may be blue. promise that the quality of the products be the same as before, but with Upgraded packaging..
  • Safe and long-lasting: these 3D printer glue sticks are made of quality PVP material, non-toxic and acid-free, will not hurt people's body, they come with high viscosity formula and have nice adhesion to hot plate or hot bed, easy to remove the printing models, suitable for the first layer before printing.
  • 1 piece of glue stick can last for more than 100 average prints, practical to help 3D print parts adhere to the build plate during printing.
  • Easy to use and clean: these PVP solid glue sticks can be easily applied with flat or straight objects, such as ruler, ID card, glass plate and so on, just lightly apply glue to the area of the printing bed being applied, only in the effective printing area, no need to cover the entire surface.
  • The 3D printer build plate is easily cleaned with water after cooling down.
  • Compatibility: these 3D printer glue sticks are compatible with all 3D printer heated bed, including build surface sheet plate, aluminum and glass plate and so on, bring a nice....
Check Stock

Landbow RC Plane - 2.4Ghz 4 Channels Remote Control Airplane Ready to Fly,RC Plane Built in 6-Axis Gyro,3D/6G Fly Modes RC Jet for Advanced Kids Adult,RC Airplane for Beginner Black

  • Easy to fly - It is 2.4 Ghz 4 channels RTF RC Plane for beginner. It made of EPP foam,strong and not easy broken..
  • ESC built with Gyro - Thanks to 6-Axis Gyro built in ESC, what makes this RC plane stability fly and easy to pilot for kids or beginner..
  • EPP body - EPP foam gets the airplane from air crashing, also makes body and wing all are in good condition from curving during transportation..
  • Fun flight - Two methods of taking off ( hand throwing off or sliding off ) brings amazing flight route for new pilot..
  • 6G/3D Modes - RC Plane is fixed with 3 flight modes. A mode uses to flight experts on 3D version and B/C modes use to advanced and beginner on 6G....
Check Stock

ANYCUBIC Vyper 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Silk Silver) Bundle

  • ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm.
  • Large Print Size & Auto Leveling, Small body but Large printing volume of 9.6"(L) x 9.6"(W) x 10.2"(H) / 245 x 245 x 260mm, ANYCUBIC Vyper 3D printer equipped with intelligent leveling system, accurately detect 16-point and automatically adjust the height of nozzle to platform, 1 click to auto leveling, which is friendly use for both veterans and recruits..
Check Stock

ANYCUBIC Vyper 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Silk Rainbow) Bundle

  • ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm.
  • Large Print Size & Auto Leveling, Small body but Large printing volume of 9.6"(L) x 9.6"(W) x 10.2"(H) / 245 x 245 x 260mm, ANYCUBIC Vyper 3D printer equipped with intelligent leveling system, accurately detect 16-point and automatically adjust the height of nozzle to platform, 1 click to auto leveling, which is friendly use for both veterans and recruits..
Check Stock

ANYCUBIC Vyper 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Matte Black) Bundle

  • ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm.
  • Large Print Size & Auto Leveling, Small body but Large printing volume of 9.6"(L) x 9.6"(W) x 10.2"(H) / 245 x 245 x 260mm, ANYCUBIC Vyper 3D printer equipped with intelligent leveling system, accurately detect 16-point and automatically adjust the height of nozzle to platform, 1 click to auto leveling, which is friendly use for both veterans and recruits..
Check Stock

3D Printer Glue Sticks, FENGWANGLI 4 Pieces Solid Adhesive for Hot Bed Print Filament PLA Glass ABS PETG CPE

  • ▌Compatibility: 3D printer glue perfect for all 3D printer hot bed, include build surface sheet plate, aluminum and glass plate,PEI, 3D printer stickers, Kapton etc..
  • ▌Easy to Use : You just need to twist 3D printer adhesive up, spread on an active printing area only, no need to cover the whole surface.
  • ▌Easy to Clean: 3D printer glue stick with water soluble formula, you can just clean it with water after drying.
  • ▌Multi-function: 3D printer bed adhesive not only for 3D Printing, but also for arts and crafts, school projects, and more.
  • ▌Long-lasting: PLA glue Lasts for 100+ average prints.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Large Spool, Blue

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Large Spool, Natural

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Small Spool, Blue

  • The best and most consistent PLA filament for your MakerBot Replicator 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Small Spool, White

  • The best and most consistent PLA filament for your MakerBot Replicator 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Small Spool, Red

  • The best and most consistent PLA filament for your MakerBot Replicator 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Large Spool, Black, MP05775

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

Geeetech JT16 PVP Solid Glue Stick, 6pcs/Set,36g,for 3D Printer Hot Bed,Quick Dry,Easy to Stick and Washable,Green Tube

  • 【High quality and safety】The special glue stick for 3D printer hot bed is odorless, non-toxic, acid-free, formaldehyde-free, made of high-quality PVP material, harmless to the human body, and safe enough to be used with confidence..
  • 【Efficient and Durable】Designed for all 3D printer enthusiasts, it overcomes warping issues in 3D printing, helps 3D printed parts stick to the build plate during printing, and makes the finished model easy to release. High-capacity and reusable, enabling multiple prints with minimal usage..
  • 【Excellent Adhesion】Solid form viscosity, high viscosity formulation, good adhesion to all surfaces and impermeability. Very stable after pasting, wrinkle-free and smooth bottom. Its water solubility, dispersion stability and thickening properties can make up for various shortcomings of liquid glue and PVA glue. Leading the way in advanced adhesives in the 3D printing industry, gradually becoming a must-have for 3D printing..
  • 【Easy To Use And Clean】Swivel bottom design, lightweight and portable, easy to use and store. Simply apply the glue lightly to the active print area without covering the entire surface. This solid glue stick spreads smoothly and dries quickly. After drying, it can be washed with water or wiped off wi....
Check Stock