Categories

Best 3d Printer Heater Block

ChowThink High Temperature Fast Heating E3D V6 Hot End Full Kit 3D Printer Extruder Parts Accessories Parts

  • Well-made: Copper Chrome-plated Heater Block, good thermal conductivity, high temperature resistance，Hollow design, fast heat dissipation.
  • Compatible with all 1.75mm E3D V6 Makerbot 3D Printer，Easy to install, With installation tool ..
  • Easy to install Upgrade the all metal hotend to effectively solve the problem of leakage and blockage during the printing process..
  • Kit Includes: Aluminum Cooling Block, Grade 5 Titanium Heat Break, Copper chrome-plated Heater Block, Copper chrome-plated Wear Resistant MK8 0.4mm....
  • Made by ChowThink，Any Questions contact us freely..
Check Stock

3D Parts Heater Bed of Ender 3 / Ender 3 Pro 3D Printer Replacement Parts Aluminum MK3 Heatbed Hotbed Platform with Heated Bed Cable Line for Ender 3 V2/ Ender-3 /Ender 3 Pro

  • Ender 3 Replacement Heater Bed DC 24V 220W with Cable Installed for Creality 3D Printer Ender 3/Ender 3 Pro / Ender 3X.
  • Original 3D Printer Ender 3 Replacement Parts / 3D Printer Accessories for Ender 3 / Ender 3 Pro / Ender 3X.
  • Ender 3 Pro Hotbed with Cable Which be Installed Well. Build Surface with 3M Adhesive which easily to stick on the heater bed platform..
  • 3D Printer Ender 3 Replacement Heater Bed with Free Technical Support..
Check Stock

Youyoute Mini Heater for 3D Printer, Resin 3D Printer Temperature Controller Heating Thermostat Temp Control for LCD DLP 3D Printers

  • 【Use for】Resin 3D printer mini heater designed for Resin 3D printers, it is small but powerful, for use in cold weather. It helps you to heat up the resin and rise the ambient temperature. Make your 3D printer work well, save your time and Resin material..
  • 【Professional design】Our temperature controller use in cold weather,when temperature lower than 75F/24C, will cause so many problems in LCD DLP 3D print. Such as Print not sticking to the bed, Layer adhesion, warming, and so on. Finally, printing fails..
  • 【Professional design】Our 3D printer heater built in high-precision temperature sensor, accurate to 0.1 ℃. Fireproof case, high-quality power cord, all professionally designed for your safe printing..
  • 【Small size】Our 3D printer Thermostat 10.8x5.7x3.2cm/4.25x5.24x1.25 in, 117grams, Prefect for 8-15 inch Resin 3D printer, It only takes 10 minutes from 40F to 80F, for use in cold weather..
  • 【Function】3D printer air controller contains three functions, one is heating, one is Air circulation, and the other is filtering. When the temperature is lower than the set t....
Check Stock

Honbay 6pcs Aluminum E3d V6 Heat Block for Makerbot 3D Printer Extruder

  • Material: Made of premium quality silicone gel, the heater block silicone cover features non-stick..
  • Perfect fit, will not fall off or come loose during prints..
  • Helps to keep the hotend temperature extremely stable..
  • Package includes: 3pieces silicone cover for E3D V6 3D printer HotEnd..
Check Stock

MakerHawk 5pcs Aluminum Heater Block for MK7 / MK8 3D Printer and 5pcs NTC 3950 100K Thermistor with 1 Meter Wiring and 5pcs 12V 40W 620 Ceramic Cartridge Heater for 3D Printer

  • 3d printer heater block: Inner hole for set screw: M6 and M3 (heat pipe and thermocouple)..
  • 12V 40W 620 Ceramic Cartridge Heater: Resistance: Material: 304 stainless steel.
  • 2080 high temperature resistant high quality....
  • NTC 3950 100K Thermistor: For 3D printers: use TEMP_SENSOR 11 in Marlin firmware.
  • Cartridge Heater: The solids, liquids, and gases need to be heated by cartridge heater, transmit heat quickly by conduction if the producer of the....
  • We have a strong after-sales team, if you have any questions, please feel free to email us. Click on "MakerHawk-US",then "Ask a question".We will....
Check Stock

TRONXY Original Extruder Assembled MK8 Hotend Kit for 3D Printer with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle，Bowden Extruder kit

  • 100% TRONXY Orginal MK8 Full Set Hotend Kit.
  • Suitable For TRONXY XY-3 Seriers 3D Printer.
  • Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon).
  • MK8 Extruder Hot End Kit With thermistor 100K and Heater 24V 50W.
  • Thermistor and heater cable length: 1.2 m ,Feed tube:50cm.
Check Stock

Ewigkeit MK8 Hotend Ender 3 and Pro Assembled Extruder with Aluminum Heating Block 0.4mm Nozzle(24V 40W)

  • Ender 3 hot end with 100% original and high quality accessories for Creality 3D printer.
  • Ender3 pro Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heater cartridge is 24V 40W.
  • Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament.
Check Stock

Ewigkeit 24V 40W Heater Cartridge 620 Ceramic Hotend for 3D Printer Prusa Mendel (Pack of 5pcs)

  • 24v cartridge Heater is made of 304 stainless steel material,Diameter: 6mm.
  • Voltage: 24v, Power: 40w, Conveniently pre-wired with 1 meter long high temperature resistant wire.
  • Easy installation, wide temperature range, good stability, high reliability provide a high corrosion prevention.
  • Heating cartridges work with Creality CR-10S Pro,CR-X,Ender 3, Ender 3X, Ender-3 Pro 3d printer,Anet E10 etc.
  • 5pcs of 24V 40W 620 ceramic cartridge heater for 3D printer hotend.
Check Stock

Wangdd22 15pc/Set 1.75mm Teflon Throat Tube+0.4mm Extruder Nozzle Print Heads+Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
  • Quanlity:15pcs/lot (5 piece 1.75mm Nozzle Inputting Tube,5 piece 3D Printer 0.4mm Extruder Brass Nozzle Print Head,5 piece Heater Blocks Hotend).
Check Stock

EIBOS 3D Printer Filament Dryer Box 3D Filament Storages with Fan Keeping Filaments Dry During 3D Printing Compatible with 2 Rolls 1.75mm 2.85mm 3.00mm PLA PETG ABS Spool Holder

  • 【DRYER & STORAGE BOX】the dryer box is specifically made for the purpose of drying 3D printer filament, intended to remove the moisture from a....
  • 【ADJUSTABLE TEMPERATURE & HUMIDITY MONITOR】adjustable heating temperature to accommodate needs of various filaments, actual and setting temp are....
  • 【COMPATIBLE WITH MULTIPLE SPOOLS】filament dryer box works for different filament types and diameters, compatible with 1.75mm, 2.85mm, 3.00mm 3D....
  • 【REVIVE YOUR BRITTLE FILAMENT】filament dryer box aims at drying the wet or brittle 3D printer filament, or even make it better than the brand new....
  • 【100W PTC HEATER】Different from applying ordinary heater 48W PI heating pad to heat up space, our product use 100W PTC heater which is more....
Check Stock

Onyehn 22pcs/Lots A8&A2 3D Printer Part Each 5PCS 0.4mm Extruder Nozzle Print Head+1.75mm Teflon Throat Tube+Heater Blocks Hotend for MK8 Makerbot Reprap

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
  • Quantity:22pcs/lot (5x 3D Printer Nozzle Throat Tube 5x Nozzle Print Heads 5x Heater Blocks Hotend 5x M6 nuts 2x Hex Key Wrenches (for MK8 Makerbot....
Check Stock

Dancing on the Volcano, Part 1

  • Item Number: Volcano heater block silicone sleeve protective sleeve for E3D Volvano Print Part.
  • Material: Made of High temperature resistance silicone material..
  • Helps to keep the hotend temperature extremely stable..
  • Can extend the life of the heater block and extruder by keeping it cleaner..
Check Stock

Official Creality Ender 2 Pro 3D Printer, Mini 3D Printer with Silent Board Removable Magnetic Build Plate Lightweight and Portable Printing Size 6.5x6.5x7inch, 3D Printer for Kids and Beginners

  • 【Excellent 3D Printer for Kids and Beginners】As an entry-level printer, ender-2 pro is easy to assemble and operate. You do not have to spend much time to learn how to use it, allowing kids and beginners to get involved in the beautiful culmination of creativity and science with 3D Printing..
  • 【Light and Portable】You can take this printer to anywhere easily since it is only 10 pounds weight. And due to its small size, it is prefect for office, dorm room and classroom..
  • 【Easy and Fast Assembly】Ender-2 Pro is 90% Preinstalled which makes this 3D printer mini is convenience to use when you Just Receive It, Only 7 Screws You Need to Tight..
  • 【Simple but Stable Structure】Unlike the Ender 3Pro or Ender 3V2, this printer takes a cantilever structure. The easier structure makes the 3d printer more lightweight. This small 3d printer takes an extra Z-axis fixed block, it can remain stable throughout the entire printing process..
  • 【Low Noise】Creality Ender 2 Pro comes with silent board. The desktop 3D printer finishes every printing model quickly and efficiently, never disturbs kids rest when performing in quiet working mode..
Check Stock