Categories

Best 3d Printer Kit Under 300

HICTOP Tenlog D3 pro 300 Degree High Temperature Nozzle 600W Power Supply 3D Printer IDEX Independent Dual Extruder 24V D3 Hero Direct Feed 11.8x11.8x13.8 inch(300x300x350mm) (Dual Extruder)

  • Please do not update the firmware if you are not sure which one is right for you as they are several versions in the market, they do not compatible with each other.
  • Three Print Models Available: You can use your D3 HERO 3D PRINTER to pringting Two-Color/Duplicate/Mirror Model. The maximum print size is 300*300*350mm..
  • Multi Printing Material Available: Our D3 Hero 3D Printer works on sorts of materials, such as 1.75mm PLA,TPU,PVA,PP, ABS, Wood and so on. The maximum printing speed is 180mm/s, recommended print speed is 50mm/s (Specifically to set up according to your model).
  • LCD Touch Screen: 4.3inch LCD display touch screen, easy to operate. This 2019 new upgrade type D3 HERO 3D PRINTER is an all-in-one machine, moving all components into a compact base under the printing bed. Save more space for you..
  • After Sales Service: We provide 3 months warranty for extruder, 1 year for the main parts and life long tech support. Any problem welcome feel free to contact us, we will reply you within 24 hours: ).
Check Stock

Tattoos

  • ✪【Easy installation and simple operation】: For beginners, if you don't know how to use 3D slicing software, you can directly download the model file (Gcode file) to the TF card, insert it into the printer, and start printing. Press the "+" button to put the material in. If you need to replace or remove the material, press the "-" button and wait for a while to pull it out. After the material is put in, press the play button to start printing. The X1 3D printer is also suitable for children, but it needs to be done under the guidance of parents..
  • ✪【Important steps】: Leveling is the most important part of using this printer. Press the home button to start leveling, when the nozzle touches the magnetic plate, disconnect the power and start leveling. If the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing tem....
Check Stock

The Cheap Detective

  • ✪【Easy installation and simple operation】: For beginners, if you don't know how to use 3D slicing software, you can directly download the model file (Gcode file) to the TF card, insert it into the printer, and start printing. Press the "+" button to put the material in. If you need to replace or remove the material, press the "-" button and wait for a while to pull it out. After the material is put in, press the play button to start printing. The X1 3D printer is also suitable for children, but it needs to be done under the guidance of parents..
  • ✪【Important steps】: Leveling is the most important part of using this printer. Press the home button to start leveling, when the nozzle touches the magnetic plate, disconnect the power and start leveling. If the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing tem....
Check Stock

DZS Elec 6pcs Mechanical Endstop Limit Switch Touch Switch Module for 3D Printer Makerbot Prusa Mendel RepRap CNC Arduino Mega 2560 1280 RAMPS 1.4 LKB01

  • Mechanical endstop limit switch kit, suitable for RepRap 3D Printer or CNC tool, supporting by RepRap electronics, RMAPS 1.4 and other common used....
  • High quality 70cm 22AWG connecting line, thick internal copper core, withstanding 2A current, 300V voltage. Max insulation temperature of insulating....
  • One-piece plug design, easy to install, hard to snap, convenient to plug or release..
  • Connection: Red line connect to VCC (ramps +), Black line connect to GND (ramps -), Green line connect to SIGNAL (ramps s).
  • Common used 1A 125V AC limit switch, strong universality, can be used as switching terminal element of RepRap 3D printer, CNC machine, Arduino / Mega....
Check Stock

Introduction to Play Analysis

  • ✪【Easy installation and simple operation】: For beginners, if you don't know how to use 3D slicing software, you can directly download the model file (Gcode file) to the TF card, insert it into the printer, and start printing. Press the "+" button to put the material in. If you need to replace or remove the material, press the "-" button and wait for a while to pull it out. After the material is put in, press the play button to start printing. The X1 3D printer is also suitable for children, but it needs to be done under the guidance of parents..
  • ✪【Important steps】: Leveling is the most important part of using this printer. Press the home button to start leveling, when the nozzle touches the magnetic plate, disconnect the power and start leveling. If the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing tem....
Check Stock

Twotrees CNC Controller Kit with Nema 23 Stepper Motor,TB6600 Stepper Motor Driver,GRBL CNC Shield Board，Switch Endstop-6.35mm

  • Newest CNC Shield Expansion Board V3.0 ---CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible with for....
  • More Compatibility Possibilities---It's a DIY kit with tons of possibilities. This complete CNC kit is GRBL compatible and has all the essential....
  • Premium Quality --- Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of....
  • Professional 3D Printer CNC Kit --- This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great....
  • Package Included:---1* CNC V3 ，1* Control Board ， 4* TB6600 ， 4* Limited Switches ，4* 23HS5628 Motor with 30cm wire (8mm/6.35mm Shaft....
Check Stock

3D Printer Nozzle Cleaning Kit - 13 Pieces 3D Print Tools 0.4mm Pin and Tweezers with Stainless Steel Wire Brush

  • Function: 3D printer accessories is perfect for removing the blockage with high precision and is also suitable for the general maintenance of the....
  • Compatibility: These 3D printer tool kit are compatible with most popular 3D printers, fit most 3D printers nozzles.
  • Uses: 1. Before use the 3D printer cleaning kit, it is recommended to heat the nozzle to 200 degrees or above (pay attention to prevent scalding).
  • Material: High quality stainless steel, the pin tip is smooth and sharp with high strength and toughness, suitable for mild maintenance of nozzle and....
  • Package contents: you will receive 10 pieces of stainless steel nozzle cleaning pins, 1 storage box, 1 copper wire cleaning brush, 2 pieces of....
Check Stock

BIQU 400mm 8mm T8 Lead Screw Set Lead Screw+ Copper Nut + Coupler + Pillow Bearing Block for 3D Printer

  • ✅【Simple Introduction:】4080U Aluminum Profile Worktable T8 Screw Linear Slide Table with Flexible coupling D20 L25 8mm to 6.35mm, Lead is 8mm ( The lead screw moves 8mm in one turn), Color is balck, Provide length: 200mm/250mm/300mm/350mm/400mm/450mm/500mm..
  • ✅【4080U Type 400mm Size:】Overall length: 449mm, Length of aluminum section: 400mm, Effective stroke: 400mm-77.15mm=322.85mm, T-type screw length: 440mm. ⚠️ (Please allow slight errors on size due to manual measurement.).
  • ✅【Wide Range of Uses:】CNC sliding table is mainly used for equipment such as cutting machine, DIY CNC router, lasser machine, lasser printer, 3D printer, small CNC machine tools and other equipment..
  • ✅【Good Performance:】This 3D printer accessories have stable performance and high work efficiency. They are an indispensable part of linear motion..
  • ✅【Product Description:】This table linear actuator kit is made of high quality metal, combined with the unique linear rail and the end mounts and gantry plate, plus other v-slot components, which is an essential part of linear motion. It is a simple linear actuator but with fine workmanship, stable performance and high work efficiency..
Check Stock

Suteck 3D Printer Tool Kit 45 PCS Including Carving Knife Set Cleaning Needle Tweezers Pliers Scraper Basic Tools with Storage Bag for Removing Fishing 3D Printer

  • ...to process the print details, remove excess materials and burrs, and complete your work quickly and efficiently.
  • 【Cleaning Needles and Tip Pliers】The round transparent plastic tube is equipped with 10 pcs 2.75" and 4.13" cleaning needles, which can be used to solve the problem of clogging of the nozzle of the 3D printer. You can also use the tip pliers to quickly clean up the excess filament generated during the 3D printing process.
  • 【Perfect Gift】If your friends and family are interested in 3D printing, you can give them 3D printer tools as gifts and they will be very happy. Because the printer 3D kit contains 45 pcs 3D printing tools and is easy to carry and use, which can meet all their needs, especially for beginners and model making enthusiasts.
Check Stock

Athletivi Speed & Agility Training Set - Ladder Kit with Fixed-Rungs, Cones, and Resistance Parachute Improves Coordination and Speed. Set for Football, Soccer, Fitness Workout Athletes.

  • 【Widely Application】This Creality cr touch automatic leveling kit comes with 3 mounting brackets, making it compatible with various types of 3D printers, such as Ender 3/ Ender 3 Pro/ Ender 3 V2/ Ender 5/ Ender 5 Pro/ Ender 5 Plus / CR-10 series. (Note:Only applicable to 32 Bit V4.2.2/ V4.2.7 Motherboard 3D Printers).
  • 【Easy to install and easy to use】With instructions, you can choose a suitable mounting bracket to install this CR Touch Auto Leveling Kit to your 3D printer, and download the CR Touch program from the Creative 3D official website and copy it to the TF/SD card. Insert it directly into the card slot of the 3D printer. The program can be updated after power on..
  • 【Independent research and development Stable function】CR Touch is a Creality 3D research institute self-developed 3D printer platform leveling solution based on hundreds of millions of user data used by the creators. Compared with the traditional automatic leveling , it is compatible with more 3D printer platforms, more stable and cose-effective. With stable quality and long service life, it can be reused for more than 100,000 times..
Check Stock

Creality 3D Printer CR-10 S5 CR Touch auto Leveling 3D Aluminum DIY Printer with Resume Print Open Source Large Print Size 500*500*500MM

  • 【THE LARGEST CREALITY 3D PRINTER】 Creality 3D printer CR10 -S5 is the largest 3d printer. The Creality CR-10 S5 desktop 3D printer offers the....
  • 【CR TOUCH AUTO BED LEVELING SENSOR KIT】The Creality Largest FDM 3D printer CR10-S5 new version comes with CR touch. High Precision Intelligence....
  • 【DUAL Z-AXIS AND DUAL MOTOR】Creality CR10S 3d printer has Dual Lead Screw Z-axis design, give much stability and accuracy than single lead screw....
  • 【POWER LOSS RECOVERY AND FILAMENT SENSOR FEATURES】The function of CR10S-5 detecting filament run-out or breakage/power loss and resume printing....
  • 【SOLID GLUE STICK INCLUDED IN PACKAGE 】Creality CR10S 5 has comes with large hot bed, preheating time make longer than others, and there is the....
Check Stock

42 Motor 1.5A 17HS4401S with TB6600 Stepper Motor Driver NEMA17 23 for CNC and 3D Printer

  • ★ Latest CNC Shield Expansion Board V3.0 ★-CNC shield board is updated version 3.0, which is suitable for CH340G Shield 3.0 version compatible....
  • ★ Professional 3D printer CNC Kit ★ This is a professional 3d printer DIY kit with multiple types of modules or components you need. It is a great....
  • ★ Premium Quality ★ Each part of this Logrunner 3d printer conk kit was made of premium material. These components can be used in a wide range of....
  • ★ DRV8825 Stepper Motor Driver with Heat Sinks ★ High quality stepper motor drive with 4 Aluminum Cooler, running within 2.5A current (Maximum),....
  • ★ Good after-sales service. We'll respond within 24 hours for any questions..
Check Stock

USA Import Material 200x200mm 300W 24V Cube Flexible Silicone Heater Compatible with Voron V2.4 Prusa i3 RepRap 3D Printer Heated bed 24V

  • used for printing area 200x200mm 3D printer.
  • With 1meter NTC 100K 3950 thermistor for temperature Control. Power consumption: 300W. Attached with two pieces 1meter length power wire.
  • This heated bed is used with 200x200mm printing area 3D printers, but also compatible with Voron V2.4 3D printer which printing area is 250x250mm..
Check Stock