Categories

Best 3d Printer Under Made In Usa

BIQU Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer

  • A general add-on heated bed power expansion module for 3D printer.
  • Completely solve the hot bed power is too large and the load current issue. It can work with the Anet A8.
  • With this addon module to your 3D printer motherboard you can lead the maximum current up to 15A.
  • Under the premise of normal heat dissipation, this module can work steadily under the condition of I(Max)=15A. Don't exceed 15A during the process.).
  • If you intend to use heated bed with your 3D printer that uses a 12V power supply, then this module is recommended, else it may cause excessive....
Check Stock

IC3D Black 1.75mm ABS 3D Printer Filament - 1kg Spool - Dimensional Accuracy +/- 0.05mm - Professional Grade 3D Printing Filament - Made in USA

  • Filament diameter is 1.75mm +/-0.05, ovality (roundness) is within 4% and weight is 2.1lb +/- 0.1.
  • Printing temperature range is 220 - 230C.
  • Made in the USA under strict quality standards.
  • Compatible with the following 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, 3doodler (pen), Delta, Mbot, Type A.
Check Stock

YOUSU PLA Filament Bundle 1.75mm,1kg Each Color.5 Spools PLA Pack for 3D Printer.

  • 5 Rolls PLA bundle include PLA Black,Red,Green,Blue,Orange,Well-rounded 3D printing filament, strong and easy to print. Print large objects without warping and great finish quality in almost any 3D printer..
  • Problem-free printing - Laser diameter control (± 0.03 mm), automatic spooling system, double drying process, and strict quality checks ensure clog-free, bubble-free, and tangle-free printing..
  • USA raw plastic material - Produced using 100% virgin Natureworks Ingeo plastic pellet made in the USA for a consistent, reliable extrusion even in the longest 3D prints..
  • Nicely packed - The filament is dried and then vacuum packed in a zip-bag that allows to preserve it between uses..
  • Technical support available – Every buyer can get a pdf version instruction. We can support on how to use our material on your printer. Contact us if you have any doubt or problem..
Check Stock

IC3D Grey 2.85mm ABS 3D Printer Filament - 2.5kg Spool - Dimensional Accuracy +/- 0.05mm - Professional Grade 3D Printing Filament - Made in USA

  • Filament diameter is 2.85mm +/-0.05, ovality (roundness) is within 4% and weight is 5lb +/- 0.1.
  • Printing temperature range is 220 - 260C.
  • Made in the USA under strict quality standards.
  • Compatible with the following 3D printers (with heated beds): Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Makergear, Up!, Lulzbot, Flashforge, Solidoodle, 3doodler (pen), Delta, Mbot, Type A.
Check Stock

AMOLEN 3D Printer Filament Bundle, PLA Filament 1.75mm Bundle, Matte Black,White,Olive Green,Navy Blue PLA Filament, 3D Printing Filament Bundle, 200g X 4 Spools Pack

  • ...- Package come with 4 colors Matte Black, Matte White, Matte Olive Green, Matte Navy Blue. High quality frosted texture PLA filament without glossy plastic appearance, no gloss, more detail and easy to print. Multicolor Filament Bundles meet your everyday needs in design and prototyping..
  • 【PREMIER MATERIAL 】- 3D Printer Filament matte PLA Bundle 1.75mm Raw materials are from USA, good performance. High quality PLA matte filament has smooth appearance, good shaping, no bubble, no jamming, no warping, no gloss,more detail and easy to print..
  • 【PRINT SMOOTHLY & CLOG-FREE】 - AMOLEN engineered its Professional 3D Printer filament to strict tolerances and the highest quality standards, ensuring trouble-free operation with your 3D printer and superior results. Good shaping, no bubble, no jamming, no warping..
  • 【HIGH COMPATIBILITY】 - AMOLEN 3D PLA Filament Bundles perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D,3Doodler, 1.75mm PLA filament consistent diameter, dimensional accuracy +/- 0.03mm..
  • 【VACUUM BAG & HASSLE FREE】 - Vacuum packaging with desiccant to keep it dry and keep out dust, enable Matte PLA filament much smoother and more stable printing. We provide ....
Check Stock

Monoprice Filament Guiding Tube Designed for MP10 3D Printer

  • : Replacing parts on your 3D printer may result in its being voided. If you are having difficulty and are unsure if your printer is still under or wish to prevent voiding your tech@monoprice for assistance..
  • Safety: always exercise extreme caution when working on any electrical device, including your 3D printer. Ensure that the power plug is removed and the printer has fully cooled down prior to working on the printer..
  • Quality at a fair price: Monoprice rugged design and rigid quality control standards deliver high quality products at fair prices..
  • Service and support: you're never on your own with Monoprice products! We have a full team of friendly and knowledgeable technicians available to answer your questions, both before and after your purchase..
Check Stock

Monoprice Filament Guiding Tube Designed for MP10 Mini 3D Printer

  • : Replacing parts on your 3D printer may result in its being voided. If you are having difficulty and are unsure if your printer is still under or wish to prevent voiding your tech@monoprice for assistance..
  • Safety: always exercise extreme caution when working on any electrical device, including your 3D printer. Ensure that the power plug is removed and the printer has fully cooled down prior to working on the printer..
  • Quality at a fair price: Monoprice rugged design and rigid quality control standards deliver high quality products at fair prices..
  • Service and support: you're never on your own with Monoprice products! We have a full team of friendly and knowledgeable technicians available to answer your questions, both before and after your purchase..
Check Stock

HICTOP Al13-310 3D Printer with Linear Guide Rail on All Axis Auto Leveling Filament Sensor Metal Large Print Size 300*300*290mm

  • 1. There is a linear guide rail and a screw rod in each axis of the HICTOP Al13-310 3D printer which can greatly improve the printing accuracy..
  • 2.One X axis, double Y axis, and double Z axis of this metal 3d printer are exactly the same with each other if any axis is damaged, it can be replaced directly, which improves the convenience of maintenance..
  • 3. Al13-310 3D printer supports high-speed printing of 300mm/s, we suggest you to print at normal speed for the first layer and add the speed to 300mm/s after the first layer finishes. Special PLA for fast speed 3D printer prints better and normal PLA can also print very well..
  • 4. This printer is reallly easy to use for beginners as leveling the bed is supper easy, you can auto level or manual level the bed and changing the Z offset and no need to roll the wheels under the bed..
  • 5. 32-bit silent motherboard and TMC2209 stepper driver effectively reduce working noise，it is about 55 decibel when printing, not exclusive ultra-quiet but still quite quiet for printer with this structure..
Check Stock

Monoprice Accessory Kit Made for Monoprice Maker Select V2 3D Printer

  • : Replacing parts on your 3D printer may result in its being voided. If you are having difficulty and are unsure if your printer is still under or wish to prevent voiding your tech@monoprice for assistance..
  • Safety: Always exercise extreme caution when working on any electrical device, including your 3D printer. Ensure that the power plug is removed and the printer has fully cooled down prior to working on the printer..
  • Quality at a Fair Price: Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices..
  • Service And Support : You're never on your own with Monoprice products! We have a full team of and knowledgeable technicians available to answer your questions, both before and after your purchase.
Check Stock

KACSOO Mini 3D Printer for Beginners, Building Size 100 x 100 x 100MM Portable Desktop with 10M 1.75mm PLA Filament, Magnetic Removable Plate (Blue)

  • Excellent Printing Performance:The mini 3D printer has a printing size of 100*100*100mm, Fits 1.75mm diameter PLA and TPU filament. The accuracy is 0.1mm, which allows a smooth and beautiful printing performance..
  • Quick Assembly:This 3D printer kit contains 3 main parts. According to our instruction manual, it only takes 5 minutes to complete the assembly.If you cannot move the shaft of the printer, please check if the connecting cable is loose..
  • Simple Operation:User can set Filament feed-in or draw out with the buttons of + and -.it is already 99% Pre-Assembled Entry-Level Printer. There are three DIY modules in total, which can be completed in 5 minutes under the guidance of the manual..
  • Stable & Ultra Silent:The 3D printer is compact and sturdy, it keeps stable while printing and the working noise is lower than 60 db, so you will not be disturbed by noise when working or sleeping. You can complete various artworks,handicrafts and samples successfully..
  • Package & Service:3D printer x1, Screwdriver x1, Power adapter x1, USB data line x1, Filament bracket set x1, Printing Filament x10M, TF Card x1, Card Reader x1, Canual x1. We provide you with 24 hours after-sales service..
Check Stock

Monoprice Replacement Filament Sensor Designed for The Monoprice Maker Ultimate 2 3D Printer

  • : Replacing parts on your 3D printer may result in its being voided. If you are having difficulty and are unsure if your printer is still under or wish to prevent voiding your tech@monoprice for assistance..
  • Safety: always exercise extreme caution when working on any electrical device, including your 3D printer. Ensure that the power plug is removed and the printer has fully cooled down prior to working on the printer..
  • Quality at a fair price: Monoprice rugged design and rigid quality control standards deliver high quality products at fair prices..
  • Service and support: you're never on your own with Monoprice products! We have a full team of friendly and knowledgeable technicians available to answer your questions, both before and after your purchase..
Check Stock

Monoprice Replacement 3D Printer Extruder Maker Select Mini for PID 15365, 21711 and Mini PRO 33012

  • : Replacing parts on your 3D printer may result in its being voided. If you are having difficulty and are unsure if your printer is still under or wish to prevent voiding your tech@monoprice for assistance..
  • Safety: always exercise extreme caution when working on any electrical device, including your 3D printer. Ensure that the power plug is removed and the printer has fully cooled down prior to working on the printer..
  • Quality at a fair price: Moonrise rugged design and rigid quality control standards deliver high quality products at fair prices..
  • Service & support: you're never on your own with Moonrise products! We have a full team of friendly and knowledgeable technicians available to answer your questions, both before and after your purchase.
Check Stock

Monoprice Replacement Nozzle Designed for Monoprice Ultimate 2 3D Printer

  • : Replacing parts on your 3D printer may result in its being voided. If you are having difficulty and are unsure if your printer is still under or....
  • Safety: always exercise extreme caution when working on any electrical device, including your 3D printer. Ensure that the power plug is removed and....
  • Quality at a fair price: Monoprice rugged design and rigid quality control standards deliver high quality products at fair prices..
  • Service and support: you're never on your own with Monoprice products. We have a full team of friendly and knowledgeable technicians available to....
Check Stock