Categories

Best 3d Printer With Large Build Area 2

15g 3D Printer Glue Sticks, Aitrip 2Pcs Solid Stickers for 3D Printer Hot Bed Print Filament PLA ABS PET PETG and Other More

  • ▌Compatibility: 3D printer glue perfect for all 3D printer hot bed, include build surface sheet plate, aluminum and glass plate,PEI, 3D printer stickers, Kapton etc..
  • ▌Easy to Use : You just need to twist 3D printer adhesive up, spread on an active printing area only, no need to cover the whole surface.
  • ▌Easy to Clean: 3D printer glue stick with water soluble formula, you can just clean it with water after drying.
  • ▌Multi-function: 3D printer bed adhesive not only for 3D Printing, but also for arts and crafts, school projects, and more.
  • ▌Long-lasting: PLA glue Lasts for 100+ average prints.
Check Stock

MakerBot Replicator + 3D Printer with swappable Smart Extruder+ Black MP07825EU

  • Your purchase includes One MarkerBot Replicator, One 3D Printer with swappable Smart Extruder+ in Black, 1 PLA spool, 1 flexible build plate, power....
  • Item's dimensions – 17.4" W x 20.8" L x 16.2"H | Build volume – 7.6” W x 11.6” L x 6.5” H / 573 Cubic inches | Power requirements –....
  • Works with MakerBot PLA Material - Large Spool, Small Spool & MakerBot Tough Material - Large Spool, Additional materials such as bronzefill,....
  • The only 3D printer tested by NIOSH for environmental safety in the classroom or office space.Aluminum Casting and Extrusions for Motion Components.
  • Winner of PC Mag Editor’s Choice Award, iF Design Award, Techcrunch best Classroom 3D printer.
Check Stock

Jewellery From Art Nouveau to 3D Printing

  • 6.23" Large Screen: Photon Mono 4K Resin 3D Printer is upgraded to a 6.23" Monochrome LCD screen, 29% larger than ANYCUBIC Photon's 5.5" screen. Rapid....
  • Large Build Volume: ANYCUBIC Photon Mono 4K has a large printing size of 132mm x 80mm x 165mm /5.19" x 3.14" x 6.49", which leaves sufficient printing....
  • 4K High Resolution: The 4K Monochrome LCD Screen has a HD resolution of 3840 x 2400, 35um XY pixels and 7% light transmittance, which means you can....
  • Fast Printing Speed: ANYCUBIC Photon Mono 4K Resin 3D Printer's max printing speed can reach 50mm/h, it only takes 2.5 hrs to print a 12cm / 4.7in....
  • Universal Compatibility: Photon Mono 4K is compatible with most 3d printing resin on the market, you can get the best printing effect with ANYCUBIC 3D....
Check Stock

ANYCUBIC Kobra Max 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Matte Black) Bundle

  • ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, Matte Black.
  • Large Build Size: ANYCUBIC Kobra Max 3D Printer comes with a large build volume of 17.7 x 15.7 x 15.7 in. / 45 x 40 x 40 cm, which is enough for daily and household using, providing you larger printing space and more choices of creation..
  • Self-developed Anycubic LeviQ Leveling Function: Anycubic upgrade auto leveling function with a 25-point smart and precise calibration. It can compensate the heated bed unevenness automatically. Leveling and printing can be completed with one button, simple operation and brings you greater printing experience..
  • Stronger Construction & Higher Precision: ANYCUBIC Kobra Max 3D Printer is equipped with double thread Z-axis moving construction. It can minimize the shaking, does not lose steps and more model details can be restored.
  • Filament Runout Detection: Equipped with a filament runout sensor, it can monitor the supply of filament intelligently. If your printer runs out of filament, it will stop automatically without losing your printing progress..
Check Stock

Comgrow Creality Ender 6 3D Printer Stable Core XY Structure with 3 Times Faster Printing Speed Acrylic Enclosure Silent Board Glass Bed 9.8 x 9.8 x 15.7 inch

  • Faster Printing Speed and Higher Precision: Thanks to the Core-XY mechnical structure, the Ender-6 enclosed 3d printer can reach print speeds up to 150mm/s, which is 3 times faster than other Ender printers and many of its competitors. In terms of printing accuracy and printing speed, the newly-released Creality Ender-6 is the most powerful and capable FDM 3D printer in the Ender series..
  • Optional Semi-closed Build Chamber: An acrylic enclosure is an optional upgrade for the Ender 6 corexy 3d printer. With acrylic plates added on the four sides of the printer, this Creality 3d printer is better at preserving the temperature within the print area, which will extend filament choices from PLA to ABS, TPU, and more. Meanwhile, the transparent plates still allow real-time monitoring of 3D printing process from 360° around..
  • Ultra Silent Main Board: Creality Ender-6 core xy 3d printer is custom-built with an ultra-silent Germany-imported TMC motion controller, enabling the printing process won't make any noise and ensuring smooth movement under 50dB..
  • Elegant Appearance: The Ender-6 is revamped with a new look: an integrated all-metal chamber body, strong Creality-blue corner connectors and acrylic open door structure giving the FDM 3d printer a very elegant....
Check Stock

Anycubic Kobra Max 3D Printer Smart Auto Leveling with Self-Developed ANYCUBIC LeviQ Leveling and Filament Run-Out Detection Large Build Size 17.7 x 15.7 x 15.7

  • Large Build Size: ANYCUBIC KOBRA MAX 3D Printer comes with a large build volume of 17.7 x 15.7 x 15.7 in. / 45 x 40 x 40 cm, which is enough for daily....
  • Self-developed Anycubic LeviQ Leveling Function: Anycubic upgrade auto leveling function with a 25-point smart and precise calibration. It can....
  • Stronger Construction & Higher Precision: ANYCUBIC KOBRA MAX 3D Printer is equipped with double thread Z-axis moving construction. It can minimize the....
  • Filament Runout Detection: Equipped with a filament runout sensor, it can monitor the supply of filament intelligently. If your printer runs out of....
  • 100% Satisfaction Service: ANYCUBIC is one of the best 3d printer brands, which provide the best 3d printers for every customer. We also provide the....
Check Stock

AMOLEN 3D Printer Filament, PETG Filament 1.75mm PETG Multicolor Rainbow, 3D Printing Filament 1KG/2.2lb

  • 【3D FILAMENT DRYER AND STORAGE】Dry Box is designed to keep filament dry and dehumidify various kind of filaments, Heating during the printing Provide a dry storage environment for 3D printer filament..
  • 【24 HOURS KEEP FILAMENT DRY】The large-area heating block can ensure that the contact area between the filament and the filament is continuously rotated in the dry hot box to remove water. The best bearing, thereby reducing all resistance on the filament of the 3D printer.
  • 【EASY TO USE】The filament drying oven has a 2-inch LCD screen and only two buttons (set temperature and time), the default oven drying time is 6 hours, short press the left button to reduce the drying time. Temperature, short press the right button to increase the temperature..
  • 【MAXIMUM CAPACITY】Support the maximum capacity: Φ210*85(H)mm, and the diameter of consumables line: 1.75mm/2.85mm/3.00mm.The Dry Box is compatible with 99% of 3D printing filaments and 3d printer..
  • 【AVOID INTERRUPTION】 Drying box has a quiet sound even when running, and can be used with various FDM printers. We provide a 6-month warranty for the whole machine, if you have any questions about the operation of the product, please feel free to contact us..
Check Stock

MakerBot SKETCH Large Desktop 3D Printer Kit, ISTE-Certified Online Training Teachers and Students, Heated Flex Build Plate, Enclosed Chamber, Access Certified Lesson Plans, 8.7x7.9x9.8in Print Size

  • IDEAL CLASSROOM 3D PRINTER: The MakerBot SKETCH supplies you with what you need to integrate bigger and bolder 3D printing into the new school year successfully including ISTE-Certified self-paced training for one teacher and fifteen students, cloud-based printing file management and 600+ certified lesson plans from educators all across the country.
  • ISTE-CERTIFIED ONLINE TRAINING: With over 15 hours of online student curriculum and a cloud-based software to manage your students’ projects, you can unlock students.
  • creative potential with accessible 3D printing covering printer operation, design-thinking and more.
  • RELIABLE, TINKER-FREE DESIGN: Classroom and home friendly design with enclosed chambers, built-in particulate filters, heated, flexible build plates and intuitive touchscreen controls for easy 3D printing and navigation.
  • WHAT’S INCLUDED: (1) MakerBot SKETCH Large Printer, (3) Spools of classroom-safe MakerBot PLA filament, (2) Build Plates, (1) Spatulas, (1) Snips, (1) Replacement Nozzles, (1) Seats in Teacher Certifications, (15) Seats in Student Certifications, MakerBot Cloud with Print Queuing.
Check Stock

ANYCUBIC Kobra Max 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Silk Rainbow) Bundle

  • Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance ±0.02mm, which making filament outflow smoother, came out homogeneous. The low shrinkage, stable printing dimensions make the fusion between the layers was very good to obtain an even better bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all.
  • Large Build Size: ANYCUBIC Kobra Max 3D Printer comes with a large build volume of 17.7 x 15.7 x 15.7 in. / 45 x 40 x 40 cm, which is enough for daily and household using, providing you larger printing space and more choices of creation..
  • Self-developed Anycubic LeviQ Leveling Function: Anycubic upgrade auto leveling function with a 25-point smart and precise calibration. It can compensate the heated bed unevenness automatically. Leveling and printing can be completed with one button, simple operation and brings you greater printing experience..
  • Stronger Construction & Higher Precision: ANYCUBIC Kobra Max 3D Printer is equipped with double thread Z-axis moving construction. It can minimize the shaking, does not lose steps and more model details can be restored..
  • Filament Runout Detection: Equipped with a filament runout sensor, it can monitor the supply o....
Check Stock

Entina X40 IDEX 3D Printer, Independent Dual Extruder 3D Printer with TMC2208 Silent Driver, 4.3' Touch Screen, PEI Spring Steel Magnetic Platform, Built-in Camera, Wi-Fi Cloud Printing 300x300x400mm

  • 【Independent Dual Extruder 3D Printer】The X40 idex 3d printer is designed with independent dual extruders that supports 4 printing modes: single nozzle printing.
  • duplication mode printing and mirror mode printing. You can print two different types materials and colors model, or print two same models at the same time..
  • 【Large Build Volume】Ultra-large forming volume allows you to print single model up to 11.8"(L) x 11.8"(W) x 15.7"(H) / 300 x 300 x 400mm, which provide enough space for your 3d printing creation, give you greater freedom to print. The large 3d printer with dual extruder can use PLA, ABS, TPU, PVA, PETG, HIS, Nylon, Wood, and Metal..
  • 【Auto Leveling & Super Silent】X40 dual extruder 3d printer equipped with intelligent leveling system, which can automatically compensate for the printing height of different points of the hotbed, friendly use for both expert-level and beginners. 32 Bit motherboard with TMC2208 silent driver provides a quieter printing at less than 50db noise level..
  • 【Build-in Camera & Wi-Fi Printing】Our big 3d printers X40 equipped with Wi-Fi chip and built-in camera that helps to keep an eye on prints in case of incorrect settings, and helps to pause or abort printing via Wi....
Check Stock

ANYCUBIC Kobra Plus 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Red) Bundle

  • ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Red.
  • Smart & Precise 3D Printer Auto Leveling: Anycubic Kobra Plus adopts Anycubic LeviQ new auto-leveling system with 25-point precise leveling up, making leveling and printing accessible in one touch. Easy control for a more intelligent printing experience..
  • Filament Run out Detection & Power off Resume: Equipped with filament & power detection sensor, Anycubic Kobra Plus can pause the printing process intelligently if you encounter the situation of running out of filament or unexpected power failure. It can resume printing from the last printing position, which can save your time and reduce wasting..
  • Large Build Volume & Fine Printing: The printing build volume of Anycubic Kobra Plus is 2.5 times larger than Anycubic Mega S. 300*300*350mm printing size to satisfy all your 3D printing needs. Equipped with Double thread Z-axis moving construction. Anycubic Kobra Plus can minimize the shaking, ensurig more model details can be restored. It is also the cornerstone to ensure high printing speed..
  • Component Upgrades to Achieve Creative Freedom: Equipped with an all-metal geared extruder, which heats up and melts the filaments quickly, ensu....
Check Stock

Zeberoxyz 3D Printer Filament Holder Rotate Spool with Base Filament Mount Rack Bracket Used for TPU/PLA/ABS/Nylon/Wood 3D Printing Material--Not Included Filament (Rotate Spool with Base)

  • 【3D FILAMENT DRYER AND STORAGE】Dry Box is designed to keep filament dry and dehumidify various kind of filaments, Heating during the printing Provide a dry storage environment for 3D printer filament..
  • 【24 HOURS KEEP FILAMENT DRY】The large-area heating block can ensure that the contact area between the filament and the filament is continuously rotated in the dry hot box to remove water. The best bearing, thereby reducing all resistance on the filament of the 3D printer.
  • 【EASY TO USE】The filament drying oven has a 2-inch LCD screen and only two buttons (set temperature and time), the default oven drying time is 6 hours, short press the left button to reduce the drying time. Temperature, short press the right button to increase the temperature..
  • 【MAXIMUM CAPACITY】Support the maximum capacity: Φ210*85(H)mm, and the diameter of consumables line: 1.75mm/2.85mm/3.00mm.The Dry Box is compatible with 99% of 3D printing filaments and 3d printer..
  • 【AVOID INTERRUPTION】 Drying box has a quiet sound even when running, and can be used with various FDM printers. We provide a 6-month warranty for the whole machine, if you have any questions about the operation of the product, please feel free to contact us..
Check Stock

ANYCUBIC Photon Mono 4K, Resin 3D Printer with 6.23' Monochrome Screen, Upgraded UV LCD 3D Printer and Fast & Precise Printing, 5.19' x 3.14' x 6.49' Printing Size

  • 6.23″ Large Screen: Photon Mono 4K Resin 3D Printer is upgraded to a 6.23″ Monochrome LCD screen, 29% larger than ANYCUBIC Photon’s 5.5″ screen. Rapid prototyping greatly improves printing efficiency by printing single layer in 1.5S. The LCD screen is more durable, 4X longer lifespan than RGB screen..
  • Large Build Volume: ANYCUBIC Photon Mono 4K has a large printing size of 132mm x 80mm x 165mm /5.19″ x 3.14″ x 6.49″, which leaves sufficient printing space and freedom for you to make any shapes of 3d models. The transparent top cover enables you to monitor the printing process while keeping 99.95% UV light blocking ratio, safe & easy for beginners..
  • 4K High Resolution: The 4K Monochrome LCD Screen has a HD resolution of 3840 x 2400, 35um XY pixels and 7% light transmittance, which means you can print all your models in a higher precision level. In addition, the contrast ratio is more than 350, making printing details more accurate and delicate, thus improving the printing quality and success rate..
  • Fast Printing Speed: ANYCUBIC Photon Mono 4K Resin 3D Printer’s max printing speed can reach 50mm/h, it only takes 2.5 hrs to print a 12cm / 4.7in model, 2.5X faster than regular resin printers. This 3d printer is an ideal choice for you to obt....
Check Stock