Categories

Best 3d Printing Bed Adhesives

Warp Pro – 3D Printer Bed Adhesive Aerosol Glue Spray – Fix 3D Print Warping - No More Glue Sticks - Spray on, Water Washable, Adhesive Solution for All Filament 3D Printer Build Plates

  • Firm Adhesion and Quick Release: Firmly adheres prints to print beds, quickly and easily releases finished prints..
  • 3DLAC aerosol spray is the perfect substitute for Kapton tape, blue tape and other types of 3d printing adhesives. Works on glass, PEI, BuildTak, Kapton, and other common print bed surfaces..
  • Works with PLA, ABS, PETG, HIPS, Nylon, Carbon Fiber, TPU, and other materials..
  • Cost efficient printing - 400ml Aerosol spray (13.52 fl oz).
Check Stock

Creality Ender 3 Pro 3D Printer with UL Certified Power Supply Removable Build Surface Plate Resume Printing Function Free Filaments & Nozzles FDM DIY 3D Printers 32bits Mainboard 220x220x250MM

  • Resume Printing Function: This Creality Ender-3 Pro 3D Printer supports resume printing from the last recorded extruder position after suffering unexpected power outages or your stopping printing. Ensuring excellent printing effect & use experience for you..
  • Removable Magnetic Hot-bed Surface: The Ender-3 Pro 3D Printer is assembled with removable magnetic hot bed surface for good adherence and easy removal of models. No need to spatula or razor models after printing..
  • 32-bit Motherboard: The Printer is equipped with Advanced built-in 32-bit motherboard. The printer won’t disturb your work or rest during printing, no noise with great printing effect..
  • Working Temperature: It only takes about 1 Minute to heat up Temperature of the nozzle and the hot bed. Suggested setting: 210 degree of nozzle & 50-60 degree of hot bed for using PLA/ ABS Filament, 245 degree of nozzle & 60-65 degree of hot bed for using TPU/PETG Filament..
  • Official Creality 3D Amazon Shop: All of our printers are delivered from official creality 3D Amazon shop with considerate 24 Hours After-Sales Services including original part replacement For Free and technology consult, ensuring remarkable user experience! Pls Contact us At Any Time if you need any help here!.
Check Stock

Creality Ender 3 Glass Bed Upgraded Build Surface Plate, 235x235x4mm

  • No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts..
  • No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing..
  • Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model..
  • Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature..
  • Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer..
Check Stock

Comgrow Creality Ender 6 3D Printer Stable Core XY Structure with 3 Times Faster Printing Speed Acrylic Enclosure Silent Board Glass Bed 9.8 x 9.8 x 15.7 inch

  • Faster Printing Speed and Higher Precision: Thanks to the Core-XY mechnical structure, the Ender-6 enclosed 3d printer can reach print speeds up to 150mm/s, which is 3 times faster than other Ender printers and many of its competitors. In terms of printing accuracy and printing speed, the newly-released Creality Ender-6 is the most powerful and capable FDM 3D printer in the Ender series..
  • Optional Semi-closed Build Chamber: An acrylic enclosure is an optional upgrade for the Ender 6 corexy 3d printer. With acrylic plates added on the four sides of the printer, this Creality 3d printer is better at preserving the temperature within the print area, which will extend filament choices from PLA to ABS, TPU, and more. Meanwhile, the transparent plates still allow real-time monitoring of 3D printing process from 360° around..
  • Ultra Silent Main Board: Creality Ender-6 core xy 3d printer is custom-built with an ultra-silent Germany-imported TMC motion controller, enabling the printing process won't make any noise and ensuring smooth movement under 50dB..
  • Elegant Appearance: The Ender-6 is revamped with a new look: an integrated all-metal chamber body, strong Creality-blue corner connectors and acrylic open door structure giving the FDM 3d printer a very elegant....
Check Stock

Outus 3D Printer Glue Sticks PVP Solid Glue Sticks for 3D Printer Hot Bed Removing Printing Models(6 Pieces)

  • ...ity of the products be the same as before, but with Upgraded packaging..
  • Safe and long-lasting: these 3D printer glue sticks are made of quality PVP material, non-toxic and acid-free, will not hurt people's body, they come with high viscosity formula and have nice adhesion to hot plate or hot bed, easy to remove the printing models, suitable for the first layer before printing.
  • 1 piece of glue stick can last for more than 100 average prints, practical to help 3D print parts adhere to the build plate during printing.
  • Easy to use and clean: these PVP solid glue sticks can be easily applied with flat or straight objects, such as ruler, ID card, glass plate and so on, just lightly apply glue to the area of the printing bed being applied, only in the effective printing area, no need to cover the entire surface.
  • The 3D printer build plate is easily cleaned with water after cooling down.
  • Compatibility: these 3D printer glue sticks are compatible with all 3D printer heated bed, including build surface sheet plate, aluminum and glass plate and so on, bring a nice using experience. suitable for project crafts, school projects, art crafts and so on, it is recommended that put the lid on after each use to prevent glue drying out.
Check Stock

3D Printer Glue Sticks, FENGWANGLI 4 Pieces Solid Adhesive for Hot Bed Print Filament PLA Glass ABS PETG CPE

  • ▌Compatibility: 3D printer glue perfect for all 3D printer hot bed, include build surface sheet plate, aluminum and glass plate,PEI, 3D printer stickers, Kapton etc..
  • ▌Easy to Use : You just need to twist 3D printer adhesive up, spread on an active printing area only, no need to cover the whole surface.
  • ▌Easy to Clean: 3D printer glue stick with water soluble formula, you can just clean it with water after drying.
  • ▌Multi-function: 3D printer bed adhesive not only for 3D Printing, but also for arts and crafts, school projects, and more.
  • ▌Long-lasting: PLA glue Lasts for 100+ average prints.
Check Stock

Creality TPU 3D Printer Filament 1.75 mm - Black | 1Kg Spool (2.2 Lbs) | Dimensional Tolerance ±0.02 mm | Fit Most FDM Printers (1 Pc/Pack)

  • SPECIFICATION - Filament Diameter – 1.75mm | Weight – 1Kg Spool (2.2 Lbs) | Color – Black | Dimensional Tolerance +/- 0.02 mm | Shore Hardness: 95A | Speed: 20-60mm/ | Recommended Nozzle Temperature: 215-235 ℃ | Recommended heat bed settings: No heat/ 60-80℃.
  • MATERIAL - With outstanding bed adhesion, no heated bed requirements, minimal warping, and abrasion resistance much higher than any other standard printing material, the uses and possibilities that TPU uncovers have revolutionized 3D printing for people around the globe..
  • UNIQUE FEATURES - Creality TPU 3D Printer filament is Soft adhesive with high elastic, Chemical resistance and environmental resistance, Waterproof and moisture proof and Environmental protection. The printing model is resistant to wear and scratch, with good aging resistance..
  • FIT MOST FDM PRINTERS - Creality TPU 3D printer filament is compatible with all FDM printers of Creality 3D, and you can create your artwork with this filament of high quality in just a few simple steps..
  • CHEMICAL RESISTANCE - TPU 3D Printer filament have Excellent chemical resistance (water resistance, oil resistance, solvent resistance) and environmental resistance, environmental protection, and nontoxic..
Check Stock

WEEDO Tina2 3D Printers, Fully Assembled and Auto Leveling Mini 3D Printers for Kids and Beginners, Removable Plateform, Small Enclosed FDM 3D Printers for Home Use, Build Volume 3.9x4.7x3.9 Inch

  • 【3D Printer for kids & beginners】The small 3D printer is fully assembled. With the simplest setup, you can use it right out of the box. The plug-and-play 3D printer can be the first 3D printer for beginners who are interested in 3D printing and modeling..
  • 【High quality prints】 The entry-level 3D printer was designed with a Cartesian structure with dual linear Z-axes to ensure reliable and fast printing. Factory-ready testing, all you need is to open the box and print directly..
  • 【Auto bed leveling】The printer is beginner-friendly because you no longer have to screw the bed to level it. It calibrated itself with the proximity sensor. The proximity sensor performed a 3-point alignment of the 10*10*10 cm build plate on the substrate at the start of printing..
  • 【Magnetic build plate】It is convenient to pull the entire plate off the printing bed and bend it a little, and the prints come off. No scraper is needed and the masking tape will last longer on the build plate..
  • 【Compact design】The size of the printer is 210*210*290mm. It is a good gift idea for a dorm room....
Check Stock

Doodler

  • ADVANCED 3D PRINTING: The Dremel Digilab 3D45 Idea Builder 3D printer is one of the best 3D printer options for printing advanced materials. It is....
  • BEST IN CLASS: The winner of PCMag.com’s 2022 Editors’ Choice Award for Best 3D Printer for Professionals and Small Businesses, a Google For....
  • EASY TO USE: Our guided setup process gets you from unboxing to printing in just a few minutes. The 4.5 inch full color touchscreen has an intuitive....
  • TOP RATED FEATURES: Features include an automated 9 point leveling sensor that detects any variation in the print bed and automatically accounts for....
  • THE DREMEL STANDARD: With over 85 years of reliable quality, Dremel is an established brand that you can trust to support you throughout your journey.....
Check Stock

Coex Metallic Gunmetal Silver PLA 3D Printer Filament 1 kg Spool 1.75 mm Dimensional Accuracy +/- 0.03 mm

  • Great Sample Pack for 3D Pen and 3D Printer: Include 25 Unique Popular Silk Shiny Colors, Each Color 4 Meters Length, Perfectly For Silk PLA Sample....
  • 25 Most Popular Silk Shiny Colors: 10 Silk Metal Colors: Silk Bronze, Silk Copper, Silk Silver, Silk Gold, Silk Gun-Metal, Silk Green Gold, Silk....
  • Premium Quality, Easy to Print: Widely Compatibility for FDM 3D Printers and 3D Pen, 1.75mm High Diameter Tolerance, No Edge Warping, Consistent....
  • 3D Printer Test Printing Tips: Recommend Heat Bed 50-60°C, Recommend Printing Temperature: 215°C, To Avoid being Tangled, Insert Filament into Spool....
  • Extra Gift: 2 Silicone Finger Caps, To Protect Your Fingers During 3D Drawing or 3D Printing, It Support You to Make 3D Printing Much More Smoothly....
Check Stock

3 Pack 16'x16' (400mmx400mm) Square 3D Printing Build Surface Heat Bed with Adhesive for 3D Printers, Cuttable to Any Size

  • ...ng plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on to the building surface without the need for additional adhesives, tapes, or slurry..
  • 【Fully Compatibly】 This 3D Printer heatbed platform sheet allows for multiple uses with either the same or different filament material. Compatible with ABS, PLA, HIPS, PET+, brick, wood, and flexible (TPE) filaments. Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results..
  • 【SATISFACTION GUARANTEED】We're so confident that you'll love these premium print surfaces, that we offer lifetime technical support and 24 hours professional customer service..
Check Stock

eSUN PLA PRO (PLA+) 3D Printer Filament, Dimensional Accuracy +/- 0.03mm, 1kg Spool, 1.75mm, Cool White

  • 【More easier & Smoothly & Odorless】JAYO is a sub-brand of SUNLU. JAYO 3D FDM PLA Filament is easier to print, odorless and prints well. JAYO PLA Filament makes 3d printing smoother..
  • 【High Precision +/- 0.02mm Tolerance】 JAYO PLA Filaments have high precision (Tolerance Level : ± 0.02mm). The full 1kg 3D printer filament has perfect roundness and very tight diameter tolerance. They can increase your 3D printing delicacy..
  • 【High Quality Material & Parameter Settings】JAYO PLA printing filament has the characteristics of anti-warping, no bubbles, no paper jam and no wire drawing. Recommended printing temperature 190-230°C (392-446°F), hot bed temperature 40-60°C (104-140°F)..
  • 【High Compatibility】JAYO 3D PLA filaments are highly compatible with FDM 3D printer materials. They are compatible with most printers FDM 3D printers, such as SUNLU T3, S8 , S8 PRO, S9 PLUS 3D printers..
  • 【Vacuum Packaging】JAYO 3D printer filaments are all vacuum sealed and come with a desiccant pack to keep the product fresh, dry and dust free for the best 3D printing results..
  • 【Professional after-sales service】For questions about product quality or 3D printing, you can contact us at any time. 24*7 days professional after-sales service team offer you worry f....
Check Stock

USA Import Material 200x200mm 300W 24V Cube Flexible Silicone Heater Compatible with Voron V2.4 Prusa i3 RepRap 3D Printer Heated bed 24V

  • used for printing area 200x200mm 3D printer.
  • With 1meter NTC 100K 3950 thermistor for temperature Control. Power consumption: 300W. Attached with two pieces 1meter length power wire.
  • This heated bed is used with 200x200mm printing area 3D printers, but also compatible with Voron V2.4 3D printer which printing area is 250x250mm..
Check Stock