Categories

Best 3d Printing Filament

SUNLU PETG 3D Printer Filament, PETG Filament 1.75mm Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, PETG Blue

  • ...Burly Wood+Purple+Blue Grey+Grass Green+Pure+Yellow.The design of 250g PLA filament is convenient for customers with multiple color needs.Especially for multi-nozzle 3d printer users and 3d pen users..
  • 【SUNLU Toughness-enhanced PLA Filament】 SUNLU premium PLA filament offer the advantage of incredible ease of 3d printing.SUNLU PLA filament,optimized print quality,high purity with low shrinkage and superb interlayer adhesion.Meet your needs for 3d printing projects on functional parts with higher toughness..
  • 【High Precision +/- 0.02mm Tolerance PLA filament】: 1.75mm PLA 3D filament(Tolerance Level : ± 0.02mm).0.25KG 3d printer filament reel,perfect roundness and very tight diameter tolerance,approximately 68m of PLA filament on each spool ease of use,minimal warping,no clogging,no bubbles.Increase your 3d printing objects delicacy..
  • 【No Clogging, no Bubbles and Good Adhesion】Better flow of SUNLU no plugging premium 1.75mm PLA filament.It has consistent diameter & roundness,less stringing and warping,strong layer adhesion.Article-free and impurity-free.No impurities,no clogged.Recommended PLA Filament Extrusion/Nozzle Temperature 200-230℃..
  • 【High Compatiblity & Vacuum Pack PLA Filament】Compatible with 99% FDM 3D printers (with heated bed....
Check Stock

SUNLU 250g PLA Filament 1.75mm Bundle, 3D Printer Filament, Dimensional Accuracy +/- 0.02 mm, 0.25 kg Spool, 8 Rolls,Black+White+Grey+Burly Wood+Purple+Blue Grey+Grass Green+Pure Yellow

  • 【Say Goodbye to Poor 3D Printing by Wet Filament】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments..
  • 【Personalized Temperature Setting】The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35℃~55℃. Suitable for more than 20 kinds of 3d printing filament commonly used in the market.
  • 【Personalized Drying Time Setting】 The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 0~24 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect..
  • 【Compatible with 99% of 3D Filament Spools】A: Maximum capacity of SUNLU dry box is Φ210*85(H)mm. B: Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC etc..
  • C: Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm..
Check Stock

3D PETG Filament 1.75mm Black 3D Printer Filament 1kg Spool PETG Filament Dimensional Accuracy +/- 0.02 mm PETG Black XVICO

  • 【PETG Filament Printing Tips】 petg 3D filament has the advantages of high purity with low shrinkage and superb layer bonding, Filament 1.75mm meeting your demands for different printing projects. 1.75 petg Filament 100% made of environment-friendly natural materials, harmless to users and the environment.petg Filament Recommended Extrusion/Nozzle Temperature 230°C – 240°C, Bed 70°C – 80°C..
  • 【petg filament 1.75mm Clog-free & Bubble-Free】3D Printer Filament approximately 2.2 LBS 1 KG Spools.petg filament Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Since the petg filament is prone to moisture, please store it into a re-sealable aluminum foil bag after unsealing to maintain excellent printing performance..
  • 【PETG Filament Less-tangle & Wide Compatibility】3D Petg Filament Full mechanical winding and strict manual examination, which guarantee the Petg filaments tidy and easy to be fed.The 1.75mm filament You don’t have to worry that it will be incompatible with your 3D printer — 1.75 mm in diameter, dimensional accuracy +/- 0.02 mm. It works perfectly with most FDM 3d printers on the market..
  • 【3D Petg Filament ACCURACY & CONSISTENCY】....
Check Stock

taulman3D Nylon 230 3D Printing Filament Black - 1.75mm (1kg)

  • Nylon 230 3D Printing Filament Prints Easily at 230C, Allowing You to Use It On Any 3D Printer.
  • Nylon Filament for 3D Printing. There Are Some Great Nylons Out There for 3D Printing But Many of Them Cost A Lot. Nylon 230 is the Affordable taulman3D Nylon and The First to Print at 230C.
  • Made in America. The Supply Chain of taulman3D Products is Different Than Your Standard Filament Maker. Every Roll is Manufactured in the US..
  • 1.75mm Diameter Nylon 3D Printing Filament Which Prints Easily at 230C.
  • 1kg Spool. Consistent Diameters Checked by Laser Technology.
Check Stock

JAYO 3D Printer Silk Filament, Low Shrinkage and Smoother Surface Consumable 1.75mm, Dimensional Accuracy +/- 0.02mm, 3D Printing Material Suitable for FDM Printers, Silk Silver 1KG

  • 【Visual Display】JAYO Silk Silver Spool is a special color filament for a unique printing experience.Given a silk texture, touch,color on 3d models, which can meet your demand of printing objects with some silk features..
  • 【High Precision】JAYO 3D printer silk filament are produced with high precise specification. Dimensional Accuracy 1.75mm + / - 0.02 mm. No bubbles, low shrinkage to ensure smooth and stable prints.3D Filament enriches your imaginary world..
  • 【Neat Filament】Adopting full mechanical winding and strict manual examination, which make sure the silk filaments tidy and easy to be fed.Say goodbye to the tangling issue and inconstant printing process,which prints you a smoother 3d models surface..
  • 【Print Parameter】Our 1KG Silk Filament recommended nozzle temperature is 200 - 230°C, Heated Bed Temp: 60°C - 80°C. Melt index: 4-8g/10min.Precise 3D print parameters remove your printing confusion and worry..
  • 【Wide Compatibility】With the years of 3D printing consumables research and develop ex....
Check Stock

Gizmo Dorks 1.75mm Nylon Filament 1kg / 2.2lbs for 3D Printers, Black

  • Industrial Strength Nylon Filament for Desktop 3D Printing. Alloy 910 is Trusted By the World's Leading Aerospace and Automotive Companies for High Performance 3D Printing.
  • 1.75mm Diameter 3D Printing Filament. Perfect for All 1.75mm 3D Printers. Recommended Extrusion Temperature: 250-255C. Trusted taulman3D Nylon. There is 1lb worth of printing material on the spool..
  • Made in America Spools, Ensuring You Can Trust That Quality and Consistency is of the Utmost Importance. This is a 1lb roll of 3d printing material..
  • Trusted By Leading Industrial and University Clients Around the World. Alloy 910 a Top Tier Nylon Filament for Desktop 3D Printing..
  • Materials Made by taulman3D Are Some of the Most Trusted and Utilized 3D Printing Filaments Worldwide..
Check Stock

JAYO PLA+ 3D Printer Filament Bundle, PLA Pro Filament 1.75mm, Neatly Wound Filament 2.5kg, 250g Spool, 10 Pack, Black+White+Grey+Red+Orange+Blue+Green+Yellow+Wood Color+Transparent

  • ...olor 250g PLA+ Filament, individually vacuum packed, 2.5KG in total..
  • 【JAYO PLA+ 3D Filament 1.75mm】PLA PLUS filament is 10 times stronger than normal PLA Filament. PLA+ filament's better toughness, higher strength, lower warping and brighter color can make the 3D printing result better..
  • 【Neatly Wound Filament】Adopting 100% neatly line up filament skill, produced with full mechanical winding and strict manual examination. Making sure JAYO PLA+ filament neat and easy to be fed. Say goodbye to the tangling problem and unstable printing process..
  • 【1.75mm Filament Diameter】JAYO PLA Plus 3D printer filament has 1.75 mm diameter, dimensional accuracy +/- 0.02 mm, accurate diameter making it suitable for almost FDM 3D printers..
  • 【PLA+ Recommend Settings】We recommend printing the PLA+ filament at a nozzle temperature of 210-235°C, bed temperature of 55-65°C, printing speed of 50-100mm/s..
Check Stock

ANYCUBIC Kobra Plus 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Matte Yellow) Bundle

  • ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Matte Yellow Smart & Precise 3D Printer Auto Leveling: Anycubic Kobra Plus adopts Anycubic LeviQ new auto-leveling system with 25-point precise leveling up, making leveling and printing accessible in one touch. Easy control for a more intelligent printing experience..
  • Filament Run out Detection & Power off Resume: Equipped with filament & power detection sensor, Anycubic Kobra Plus can pause the printing process intelligently if you encounter the situation of running out of filament or unexpected power failure. It can resume printing from the last printing position, which can save your time and reduce wasting..
  • Smart & Precise 3D Printer Auto Leveling: Anycubic Kobra Plus adopts Anycubic LeviQ new auto-leveling system with 25-point precise leveling up, making leveling and printing accessible in one touch. Easy control for a more intelligent printing experience..
Check Stock

JAYO TPU Filament, 1.75mm 3D Printer Filament, TPU 3D Printing 0.5KG Spool, Dimensional Accuracy +/- 0.02mm, Blue

  • 【Soft Filament】JAYO TPU FDM 3D Filament has a shore hardness of 95A, higher softness and tension. It is suitable for printing children's toys, shoes, medical supplies and other product models with good stretchability. JAYO filaments have a wide range of uses and gives you more printing choices..
  • 【 Flexible Filament】 TPU Flexible filament is able to withstand much higher compressive. With 600% Fracture Growth Rate, it can be used to print some strong and stable projects. No worry about fracture.
  • 【Dimensional Accuracy & Less-Tangle】JAYO 1.75mm TPU filament is advanced precisely diameter measuring in the manufacturing process. The dimensional accuracy is +/- 0.03mm. Besides, we use the tidy line which can aviod tangling. And you will get a pleasure printing experience and enjoy yourself totally.
  • 【Clog-Free & Bubble-Free】TPU Printingt filament material is completely dried for 24 hours before vacuum packaging. It can effectively protect the TPU filament from moistur and guarantee clog-free and bubble-free. You won't have any trouble of bubble and clogging and just enjoy your delicate printing.
  • 【Printing Effect& Settings】TPU 3D printing material has bright color and smooth surface and with the Nozzle Temperature : 200-220℃ and the bed: 70....
Check Stock

YOUSU PLA 3D Printer Filament, White PLA Filament 1.75mm for 3D Printer & 3D Pen, 1kg (2.2 lbs)

  • [ No warping & Good Layer Bonding ] -Yousu 1.75mm PLA filament has excellent first layer adhesion to reduce warping, shrinkage, curl and print failure. Good layer bonding strength makes the printing parts stronger,Less string..
  • [ Purity material & Precision Diameter ] - Yousu 3D Printer filament Produced using 100% virgin Natureworks Ingeo plastic pellet made in the USA, avoid print failure jam or clog and making you a smoothly printing & better surface,this PLA filament comes with +/- 0.03mm tolerance..
  • [ Tangle free & High compatibility] - Total length is 340--350m,1kg 3D Printer filament spool,No tangle winding filament and compatible with the most FDM 3D printers, feed smoothly and constantly without clogging the nozzle or extruder..
  • [Vacuumed Sealed Package ] - Yousu PLA filament was dried and then vacuum packed in a zip-bag which keep your 3d printing filament in a good condition before printing..
  • [ Technical support ] -24 hours customer support with technical advice to make your printing job easily..
Check Stock

BOSOKU PLA 3D Printer Filament Matte Black/Blue/Green/Grey PLA Filament 1.75mm Dimensional Accuracy +/-0.02mm, 4 Assorted Colors, 4 Spools

  • ✔️【PREMIUM MATERIALS】: 3D printer filament made of 100% new pure Polylactic Acid material, or PLA, is a bio-plastic printing material derived from natural materials, which boasts complete biodegradation and lower melting temperature, eco-friendly and safe, with no odor during the printing.
  • ✔️【4 ASSORTED COLORS】: PLA plus filament 1.75 set includes 4 Assorted Colors(4 Spools), Matte Black PLA/ matte Blue PLA/ matte Green PLA /matte Grey PLA, that offer multiple choices for your artistic creation, special colors suitable for printing lampshades, vases, and other design parts.
  • ✔️【3D PRINTING TEMPERATURES】: Recommended Printing Temperature of your PLA 3D printer filament: 374 °F to 410°F (190℃~210℃), high precision diameter 1.75mm PLA filament roll with tolerance: +/-0.02mm, that brings maximum smooth performance, no breaks, no bubbles, no clogging during even the most delicate of 3D printer work.
  • ✔️【HIGH COMPATIBILITY】: Your 3D printer filament PLA is easy to press and works with the most well-known 3D Printers with PLA filament 1.75mm in the market place for 3D art craft making.
  • ✔️【4 COLORS PACK】- 4 Spools，250g Matte PLA filament in one Package, Within 24 Hours Reply, 100% Satisfaction Guarantee, If you're no....
Check Stock

3D Solutech Real Grey 1.75mm Flexible 3D Printer Filament 2.2 LBS (1.0KG)

  • PRODUCES THE BEST 3D PRINTS: This 3D printing filament offers excellent dimensional accuracy with no more than 30 microns of diameter variance. This allows for better and more consistent feeding as well as higher quality 3D prints. You can get professional results right from your own 3D printing machines..
  • HIGHLY COMPATIBLE: We at 3D Solutech are proud to provide you with flexible PLA filament that is compatible with almost all 3D printers, including those from RepRap, MakerBot (such as the Replicator and Replicator 2), Ultimaker, Bits from Bytes, Airwolf 3D, MakerGear, Printrbot, Bukobot, Type A Machines, and many more..
  • MEETS ALL 3D PRINTING NEEDS: At 3D Solutech, our durable printing filament is highly versatile and can meet all of your 3D printing needs and applications. It comes in a variety of 3 different colors, including white, silver, hot pink, navy blue, and more. No wonder it’s the first choice of engineers and designers!.
  • ENVIRONMENTALLY FRIENDLY: Did you know that our PLA filament is stronger than alternative PLA filaments? It consists of polylactic acid and algae harvested from areas where it harms the environment in excess amounts. Additionally, it requires less energy to print because it requires a low printing temperature..
Check Stock

SUNLU S9 Plus Large 3D Printer, FDM 3D Printers with Filament Dryer Integration, Clog Detection, Auto Leveling, Silent Motherboard, Open Source, Touch Screen, Big Printing Size 310x310x400mm

  • ...ple color needs.Especially for multi-nozzle 3d printer users and 3d pen users..
  • 【SUNLU Toughness-enhanced PETG Filament】SUNLU 3d filament PETG 1.75mm is a rigid, tough, high performance material, offering excellent clarity, light transmission and high gloss. It’s about as stiff as PLA. PETG 3d filament suggest printing temperature is 220-250°C – Base Plate Temperature: 70-80°C if no glue applied..
  • 【High Precision +/- 0.02mm Tolerance PETG filament】: 1.75mm PETG 3D filament(Tolerance Level : ± 0.02mm).0.25KG 3d printer filament reel,perfect roundness and very tight diameter tolerance,approximately 68m of PETG filament on each spool ease of use,minimal warping,no clogging,no bubbles.Increase your 3d printing objects delicacy..
  • 【Tangle Free& No Plugging】 Better flow of SUNLU no plugging premium 1.75mm PETG filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. Article-free and impurity-free..
  • 【High Compatiblity & Vacuum Pack PETG Filament】Compatible with 99% FDM 3D printers (with heated beds) and 3D pen.Vacuum packed neatly arranged SUNLU PETG filament, provide better printing result.Environmental protection,250g PETG filament is made from starch raw materials derived from renewable plant ....
Check Stock