Categories

Best 3m Super 8spray Adhesive 2

Strong-Adhesive-Backed Mounts Cable Tie Mounts Wire Tie Base Holders， Screw-Hole Anchor Point Provides Optimal Strength for long（50pack）

  • 1.Product packaging: 50 bases, 50 cable ties, 50 pairs of fixing screws, 50 pieces of 3M self-adhesive.
  • 2.Great meterial:Our self-adhesive cable tie brackets are made of high quality materials that are sturdy, flexible and lightweight. The self-adhesive contains 3M super glue, which is durable and includes 50 pairs of screws to help you fix your base more stably..
  • 3.Practical design：The configured cable tie has a strong friction and the fixed cable tie has a diameter of 3.4 cm, which can easily keep your cable clean and tidy..
  • 4.Eazy to use： Mounts without tools. Simply peel off the backing paper and place firmly on a clean, dust-free surface for best adhesion. Use the built-in screw hole for added strength..
  • 5.Note: Clean the surface of the dust before use,3M glue is best to be glued once and should not be disassembled repeatedly. After applying self-adhesive glue, it should be used 24 hours apart..
Check Stock

TAGVO Phone Ring Holder Finger Ring Kickstand and 3M Sticky Adhesive Replacement Set Including Metal Plates - 360°Rotation Metal Grip Holder for Magnetic Car Mount Compatible with Cell Phone

  • 【Metal Plate with Strong Adhesive】Super thin metal plate is designed to use with magnetic mobile phone car mount, magnetic air vent mount and other magnetic cellphone car mount. 1, Advanced surface treatment. 2, Storng adhesive on the back. 3, Scratch-Resistant Protective Films Included, simply stick magnet sticker for phone mount behind films to your case/battery cover, on a rugged case, or directly to your device. Then device will automatically suck as it closes to the car mount..
  • 【3M sticky adhesive replacements compatible with Phone Holder, Metal Plates, Magnetic Car Mount Holder】IMPORTANT NOTE: Here are some problem customer may encountered frequently. 1. Hard to peel off the red backing film, in this situation, please repeat this act: peel-if come up-press red film back-peel again. 2. Adhesive can’t stick well on phone case, please don’t not stick adhesion on rugged, texture surface silicone phone case, it may not stick well. 3. Last but the most important rule, wait.
  • 【Easy to use】You need to remove the used 3M tape of phone car mount and clean up the mounting surface with alcohol pad included until fully dry before installation, then place a new 3M adhesive sticky circles on the back of grip mount or phone case and pres....
Check Stock

Vital Senses Series Prequel

  • 【Strong Stickness】Original 3M Vhb stick adhesive mount,1.55mm thickness red Vhb adhesive pads, stronger than most adhesive pads.This 3M Vhb....
  • 【Highly practical】Suitable for stick many kinds of material with flat hard surface.It can be used in home bathroom mirror, refrigerator, bed post,....
  • 【Wide Compatibility】Rectangular 3M Vhb sticky adhesive tape can be used on the bottom of the most dashboard 360 degrees Rotation magnetic car....
  • 【Note】(1)Please don't stick the 3M adhesive pad on very soft, rugged, texture, grease surface or leather surface.(2)Make sure the desired surface....
  • 【Worry-free】Comes with worry-free lifetime and excellent customer service..
Check Stock

Lock Sucker Suction Cup Hook Dashboard Car Mount Mounting Super Strong Adhesive Pads 6CM and 8CM Can Use for Xiaoyi Camera

  • 1.WHERe TO USE? Your sucker is not strong enough and fall off often? Try MeetRade super adhesive for lock sucker. Never fall again!.
  • 2.MATERIAL:3M VHB super strong adhesive, it can help suction cup installs on not totally flat surfaces..
  • 3.SIZE: Diameter lengthen out to 60MM (2.4INCH) and 80MM(3.15INCH)!.
  • 4.EASY TO CLEAN: When you no longer need it, just gently buckle it down and slowly pull it up. The MeetRade adhesive is easily removable and do not leave a residue..
  • 5.MULTI-PURPOSE ADHESIVE: MeetRade adhesive provide the best solution for your lock sucker hook, car mount and so on..
Check Stock

Sticky Adhesive for Dash Cam Suction Cup Mount, VOLPORT 90mm 3M Circle Heat Resistant Double Sided Extra Strong Mounting Tape Pad Replacement for Car Boat Dashboard Windshield Camera GPS Sucker Holder

  • 【Designed for Suction Cup items】Volport 90mm large size heat temperature resistant 3M sticky adhesives paper for dashboard windshield suction cup mount, make your sucker stronger. You can also adhere the grey adhesive foam tape to the dashboard pad mounting disk. Applicable to most suction cup dashboard stand and windshield long arm mount of dash cam, Action camera, rear view camera, backup camera, GPS navigator, mobile phone, sink sponge holder, basket. You can also cut it to the size you need..
  • 【Genuine 3M Sticky Adhesive Circles 】These 3M VHB very high bond strength double-side adhesive backing stickers for dash cam mount back have high temperature(120℃+) resistance performance, even in Texas, you can use it no worry in hot summer.Stickiness is 40% stronger than ordinary glue, make sucker with super strong suction force. The tape is waterproof, fit for DSLR sports action Cameras, sink caddy, iPad, widely install your DSLR on window, mirror, dashboard even exterior of auto or truck..
  • 【Easy to Install】The adhesion sticker replacement kit comes with alcohol wipes to clean the surfaces before applying. Just peel off the old gel adhesive, clean the the surface with alcohol pack before using the new adhesive rounds, after surface is dried, p....
Check Stock

3M Super 77 -Glue Multipurpose Adhesive for Foil Plastic Paper Foam Metal (Pack of 2)

  • QTY (2) 3M SUPER 77 7.33 OZ NET/CAN 2 Cans 3MTM Super 77TM Multipurpose Spray Adhesive is a high tack, high coverage and fast drying adhesive. Low soak-in for long lasting bond.
  • High coverage and aggressive tack Bonds quickly in 15 seconds General industrial, packaging, infusion molding, dry lay-up, dry wall, wood working, furniture, specialty.
  • Vehicles, marine and heating ventilation and air condition (HVAC).
  • Bonding, attaching, adhering, fastening, securing, gluing, tacking, sticking, gripping and hanging.
Check Stock

BQTime Modern 3M Self Adhesive Hooks Stainless Steel Towel Robe Coat Cloth Bag Key Holder Hanger(2 Pack Single Hook), Heavy Duty, Wall Mounted, Waterproof, Kitchen Bathroom Shower Accessories, Black

  • 3M Hooks Heavy Duty: 3M adhesive, super power to hold 11 lb/5kg(Max) per hook on wall. Adhesive 3M hooks size:4.5*4.5CM / 1.8″*1.8″.(Only sell by BQTime).
  • Premium Solid stainless steel construction, ensuring quality and longevity, NO rust. No Scratch and no mark after remove the self adhesive hooks..
  • Suit for Most Wall: This utility hooks can stick well on flat surface, even some rough surfaces like ground glass,wood(Don’t install it on painted walls,otherwise it might damage your paint)..
  • Waterproof and Oilproof: Water spraying on the towel hook cann’t affect the adhesive, high and low temperature resistance let it adsorb solidly on bathroom and kitchen..
  • Multifunctional 3M Hook: Great for hanging shower and bath accessories, can hold bathrobe clothes towel robe bag coat key etc..
Check Stock

Prime-Line U 9265 Textured Wall Protector, 7 inch, White

  • ...hat are sure to protect you from holes in the walls. Have peace of mind knowing that your wall is protected with strong round bumper thermoplastic rubbers pads that absorb shock and prevents noise. And since they are white, they are almost unnoticeable while protecting the door from hitting the wall..
  • 3M STRONG SELF ADHESIVE: Set them up in seconds with the easy peel-off & self-adhesive design. Our wall mounted door bumper uses the industry-leading 3M adhesive which assures they will stay sticky for a very long time. Simply, these door handle wall protectors are super-durable and give you long-term protection..
  • GENEROUS SIZE: Our original Strongest Home door knob wall protectors are 2” diameter and with 0.2” height. This means that this 3M self-adhesive large doorknob blocker will give ultimate protection and cover all standard door knobs..
  • VERSATILE USE: This JUMBO set of 6 door slam stoppers are great for fridge or cabinet door, table corners, headboard, toilet seat. Use the door guards to protect the damage caused by the doorknob, door handle slamming. Or use the clear door stopper as rubber feet for different appliances and furniture. So, there is nothing stopping you to – Click Add to Cart -- & get ULTIMATE PROTECTION with the best door guard....
Check Stock

3M Sticky Adhesive Replacement for Magnetic Dashboard Car Mount Holder Base, VOLPORT 5 Pack Rectangle Heat Resistance Double Side Tape VHB Sticker Pads for Dash Magnet Phone Mounts & Ring Grip Socket

  • For Dashboard Magnetic Mount Base: Volport rectangular 3M adhesive sticky replacement fit 95% stick-on dash magnetic phone car mount holder with rounded rectangle base on the market. When your magnet dashboard car holder lost its viscosity, these 3M double-faced tapes backup replacement parts mounting adhesives is a good way to re-stick/reuse dashboard car phone mount & Phone Dock. Size: 1.85″ * 0.87″, the thickness is 0.047″. Can be cut circle disk/disc to fit ring grip socket car mount’s back..
  • Heat Resistance Car Holder Adhesive: These iphone dashboard car mount backing stickers is high temperature(120℃+) resistance in hot Summer Texas. Extra strong both side squares 3M VHB dashboard cell phone mount replacement adhesion pads’s stickiness is 40% stronger than original 2 side sticky glue, easy to fix your car magnetic phone holder base, heavy duty dashboard mount 3M vertical adhesive sticker tab for car mount base, stable and secure driving uber, truck, jeep, vehicle in bumpy roads..
  • NOTE TO USE 3M CAR MOUNT ADHESIVE: 1.Please don’t stick the 3M replacement sticky adhesive pads on rugged, texture, grease or leather surface. 2.Make sure the desired surface is clean and dry, that means no wax, dirt or porous....
Check Stock

pop-tech Sticky Adhesive Pad Replacement for Car Dashboard Magnetic Phone Mount Base, 8pcs 3M VHB Double Sided Sticker Heat Resistance Tape for Magnet Cellphone Holder & Windshield Dash Cam

  • 【Compatible with Various Kinds of Dashboard Magnetic Mounts】 Pop-tech's extra adhesive tapes are made with 3M HVB original adhesive. When the base of your dashboard magnetic mount loses its stickiness, replacing the adhesive on the base of the holder is the best way. And our super sticky adhesive tape is your best choice! These magnetic dashboard mount base replacement sticky adhesive compatible with Wizgear, Scosche, Bextrix, APPS2Car, Trainium, etc..
  • 【Adhesive size】 Rectangle : 1.85" * 0.87", the thickness is 0.047". Perfectly suitable for 95% of dashboard mounting bases. It can be pieced together or cut to replace the base sticker tape of driving recorder, dash cam, ring grip mount, automotive windshield sticky mount, smartphone holder, audio DAC! Versatility: Stickers can be affix on flat hard surfaces, such as home bathroom mirrors, refrigerators, bedposts, walls, lockers, offices, dashboards, windscreen..
  • 【Very High Bond Stickiness & Heat Resistance】 Pop-tech's rectangular adhesive tape uses the most advanced silicone adhesive synthesis technology, and its steady viscosity is 40% higher than ordinary adhesive tapes. High tem....
Check Stock

VOLPORT Extra 3M Super Sticky Adhesive and Phone Magnet Sticker Disc Replacement Strong for Reusing Grip Stand Socket Base, Circle Double Sided Car Mount 3M Tape Glue Pads Round Magic Metal Plate Disk

  • DESIGN FOR PHONE SWAPPABLE GRIP&STAND: VOLPORT brand multiple 3M circular double side tapes sticky adhesion disk is designed for repairing expanding phone ring holder and replace magnetic phone car mount. Heavy duty two sided circle stickies adhesives fit regular size collapsible socket stand base & replaceable dashboard car holder’s back.
  • metal plates can be fit inside of lids or outside of the caps top. Best backup replacement adhesive parts to reattach socket grip to new iphone 11 case..
  • STRONG DOT ADHESIVE STICKY REPLACEMENT: We adopt original 3M VHB super adhesive black gel, stickiness is 40% stronger than cheap universal glue, high temperature resistance in hot Summer. 6pcs big round double side tape sticky foam adhesive tabs stuff for resticking collapsible grip and finger rings stand.
  • 2pcs additional high bond small dots mini circle discs attachment for reusing the bottom of phone socket mount, repositionable magnetic dashboard car phone mounts, reinforce dash cam mount..
  • HOW TO REPLACE ADHESIVE: 1. remove old adhesive and clean surface with alcohol prep pads, let dry, then stick adhesive on holder. 2. peel off the red backing film, this is the most difficult part, many customer said the adhesive part with come up with when pe....
Check Stock

Sticky Adhesive Replacement for Socket Wallet+ Base pop-tech 6pcs 3M VHB Strong Sticker Pads for Cell Phone Wallet Plus Case Back Stand Double Sided Tape for iPhone 12 13 Samsung & All Smartphone

  • 【DESIGNED FOR SOCKET WALLET】 6 PACK VHB 3M adhesive strips for Socket Wallet, exclusively designed for smartphone socket wallet. When your socket....
  • 【HIGH STICKINESS】 Super double-sided polygon 3M VHB cellphone wallet replacement adhesion pad's stickiness is 40% stronger than original 2 sided....
  • 【EASY TO USE】 The 3M high bond sticky adhesive kit can be easily re-installed in the socket wallet without tools. (1) 6pcs clear protective film....
  • 【NOTE】 (1) Please wait 24 hours to ensure that the sticker has the best adhesion after stuck. (2) Please do not stick the clear protective film or....
  • 【WARRANTY】 Pop-tech products provide 12 months worry-free after-sales warranty service (extended from 12 months to 18 months if you contact....
Check Stock

3M Scotch 924 ATG Tape: 1/2 in. x 33 ft. (Clear Adhesive on Tan Liner)

  • 3M Scotch 924 ATG Tape is a permanent unsupported acrylic adhesive transfer film (pressure-sensitive adhesive pre-applied to a special release liner)..
  • 3M 924 is a permanent, all-purpose transfer tape that offers excellent adhesion to most paper stocks. 3M Scotch 924 ATG Tape has good solvent resistance and excellent UV resistance..
  • Can bond a wide variety of similar and dissimilar materials such as metals, glass, wood, papers, paints, and many plastics. Some application ideas include mounting promotional items and posters, core starting, and mounting picture frame mat boards and dust covers..
  • The main difference between 3M 908 and 3M 924 ATG tapes is that 908 is pH neutral (acid-neutral). Scotch 924, like all ATG tapes, is reverse wound on the roll so it is designed to be used in an ATG dispenser..
  • Carrier/Backing: N/A (Unsupported). Adhesive: medium-firm acrylic. Release Liner: tan densified Kraft paper. Thickness: 6 mils (carrier, adhesive, liner) 2 mils (carrier, adhesive) 4 mils (liner). Adhesion: 25 ounces per inch (to stainless steel test panel). Service/Operating Temperature: up to 180F. Core: 1-inch diameter plastic..
Check Stock