Best 3pc Threaded Ball Valve

DAN SPEED 1.5 NPT Female Threaded Full Port Ball Valve with Blue Vinyl Lever Handle,316 Stainless Steel,WOG1000

• Body & Ball Type:Full Port, Low Operation Torque,Temp Range:-60F to 450F.
• The valve is fitted with PTFE seals for maximizing corrosion resistance and lifespan of the ball valve.
• This ball valve is made of Stainless Steel 316 and has a plastic-covered lever handle for on/off manual control.
• Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas. Fluid Medium:For use with liquids and gases.
• This inline valve has a Standard port flow and 1.5" female National Pipe Taper (NPT) threads for connecting two male threaded pipe fittings going in....

Danco 80816 Complete Toilet Repair Kit Fill Valve, Flapper, Rod, Float Replacement, White

• TOILET REPAIR KIT: The Danco Toilet Repair Kit includes replacement parts for the most common toilet parts that cause a leaky toilet and will restore your toilet to its original working condition..
• TOILET FILL VALVE DIMENSIONS: The fill valve height is approximately 8.5 inches from the bottom of inside the tank..
• TOILET BALL ROD FLOAT & BALL FLOT DIMENSIONS: The length of the brass rod is 7.75” and the length of the float is 5.5”.
• when the brass road is threaded into both the float and threaded into the fill valve, the total length of the rod and float ends up being about 11.75”..
• TOILET FLAPPER DIMENSIONS: The toilet flapper is ideal to replace worn-out flappers and is designed to fit 2 in. toilet flush valves..
• EASY TO INSTALL: Includes easy to follow installation instructions. Complete this DIY Project with common household tools such as screwdriver and adjustable wrench..
• BUILT TO LAST: The durable plastic and rubber constructions provides strength and durability which allows for optimal performance..
• SINGLE-FLUSH APPLICATIONS: This toilet repair kit works for standard single-flush applications..
• COMPLETE TOILET REPAIR KIT INCLUDES: Universal flapper with adapter, spring, float with rod, and ballcock with refill tube..

2 Pieces Air Compressor Valve ,Ball Type Drain Valve Brass Mini Ball Valve, 1/4 Inch NPT Male x NPT Female for Air Compressor

• It can drain water or other harmful liquids thoroughly, which can ensure gas quality and prevent corrosion of pneumatic tools and piping components.
• 1/4 Inch female and male NPT threads: this compressor valve has type-1/4 inch standard connections, female and male NPT threads for connecting male threaded pipe fittings to female threaded pipe fittings, please check the thread information carefully before buying.
• Besides, it is designed with pre-applied thread sealant for airtight connections and O-ring free construction.
• Extensive usage: air compressor valve has a wide range of application including air, gas, liquid, steam, air compressor, air tank, water tank, air bottle and more, can drain water or other harmful liquids, gas thoroughly to ensure gas quality and avoid corrosion of pipes.
• Quality brass to make: air tank drain valve uses quality brass to make, so it is stable and not easy to break, safe and reliable, with corrosion resistance, wear resistance, allowing you to use it with confidence for a long period.
• Better work performance: brass mini ball valve is equipped with lever handle for convenient on/off manual control and full port flow, giving you higher operating efficiency and better work performance.

Aupoko R134A Valve Core Quick Remover Installer, High Low Pressure Valve Core Remover Tools Kit for R13A Refrigerant Air Conditioner System

• ★ USEFUL TOOL KIT ---- This valve core remover tools Kit includes high pressure (Red) and low pressure valve core quick remover installer, 1 pc valve core remover, 5pc R134a valve cores and 5pc 5V1 valve cores..
• ★ HIGH & LOW PRESSURE QUICK COUPLER ---- High pressure coupler (Red), with inner diameter 16 mm, and Low Pressure coupler (Blue) with inner diameter 13 mm..
• ★ ADJUSTABLE ---- The R12 valve core quick remover installer is adjustable to fit the different valve core. Good for vehicle/car/auto air condition, household air conditioner, HVAC Maintenance or repairing..
• ★ WELL-DESIGN ---- Built-in stainless-steel ball valve: the well-designed ball valve and threaded remover lets the user block off the system while changing the valves cores, allowing for no refrigerant loss..
• ★ 1 YEAR WARRANTY ---- Valve Core Quick Remover Installer sets are made by high quality brass alloy, last long.
• easy to operate and install, strong sealing for durability and safety. We offter 12 months warranty, should be there any question, please feel free to contact us..

HydroTools by Swimline Precision Male & Female Threaded Ball Valve for Pools

Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor

• ...dditional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
• There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with different diameters. Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or fitting with different diameters Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..

Kitchen Sink Soap Dispenser Brushed Nickel Countertop Soap Dispenser Pump 47 Silicone Extension Tube Connect to The Soap Bottle Directly Say Goodbye to Frequent Refills

• NO MORE CONSTANT REFILLING -- This sink soap dispenser pump comes with a 47” extension tube that goes directly into an original large dish soap....
• LONG THREADED SHAFTTUBE -- The kitchen sink soap dispenser with Lengthen and thicken 3 inches threaded shaft tube fits most countertops (Granite,....
• UPGRADED CHECK VALVE --The check valve keep the tube always filled with the washing liquid, avoiding the trouble of repeatedly pressing the washing....
• EASY INSTALlATION -- This countertop soap dispensers comes with step-by-step instructions, works as a faucet soap dispenser, brushed steel with glair....
• PACKING INCLUDING -- 1 x soap dispenser pump head, 1 x 47" extension tube, 1 x subuliform soap bottle stopper, 1x check valve, 1x PP ball, 3x....

New FloodStop for Water Heater/Whole House FS 1.00-NPT v4 Lead Free

• Motorized Full-Port Ball Valve (1 inch NPT pipe threaded, valve length: 4 inches).
• Control Unit (uses Battery Backup 4 X AA Size not included).
• One output contact (normally open) that can be connected to an Alarm, Home Automation or Auto-Dialer systems if desired.
• Output Contact Wires - approx 3ft to valve and approx 7ft to sensor.

Watts Brass & Tubular 2T-M2 Washing Machine Water Shut Off Valve

• WASHING MACHINE SHUT OFF VALVE: This manual washing machine shutoff valves are used in washing machine applications to manually control water flow and pressure from the hot and cold-water supply piping to the flexible hoses feeding a washing machine..
• WATER SHUT OFF VALVE: It prevents the washing machine hoses from bursting preventing water damage in the home. Inlet adapter fittings allow either 1/2″ threaded or 1/2″ solder copper x 3/4″ washing machine hose threads on hot & cold-water outlets..
• SINGLE LEVER CONTROL SHUT OFF VALVE: It is manual, single control lever controls both hot and cold water simultaneously, shuts off water protecting machine parts and water supply hoses.
• INSTALLATION: It can be installed in a more convenient spot than old boiler drain type hot and cold-water shutoffs which are often installed in hard to reach places..
• BALL-TYPE DESIGNED VALVE: The ball-type design allows it to be opened to any position to throttle water flow and minimize harmful water hammer and banging pipes caused by fast closing washing machine solenoid valves..

Aupoko R134A R12 Valve Core Quick Remover Installer, Air Conditioning Adjustable High Pressure (Red) and Low Pressure (Blue) Valve Core Tool, 2 Pack

• ☀ ADJUSTABLE --- The R12 valve core quick remover installer is adjustable to fit the different valve core. Good for vehicle/car/auto air condition, household air conditioner, HVAC Maintenance or repairing..
• ☀ WELL-DESIGN --- Built-in stainless-steel ball valve: the well-designed ball valve and threaded remover lets the user block off the system while changing the valves cores, allowing for no refrigerant loss..
• ☀ 1 YEAR WARRANTY --- Valve Core Quick Remover Installer sets are made by high quality brass alloy, last long.
• easy to operate and install, strong sealing for durability and safety. We offter 12 months warranty, if it can’t work normally during the warranty time or any other question, please feel free to contact us, we will refund or reship for you without any reason..

New FloodStop Multi-Purpose FS 1/2-NPT v4 (Lead Free)

• Motorized Full-Port Ball Valve (1/2 inch NPT pipe threaded).
• Control Unit (with Battery Backup 4 X AA Size).
• One output contact (normally open) that can be connected to an Alarm, Home Automation or Auto-Dialer systems if desired.
• Output Contact Wires - approx 3ft to valve and approx 7ft to sensor.

SHYOKO 1-1/2 Inline PVC Ball Valve Compact T-Handle Water Shut-Off Valves Female Thread [Available 1/2 ,3/4 ,1 ,1.25 ,2 ]

• PVC MATERIAL - PVC for corrosion resistance, high strength, and less weight than fittings made from metal, saving cost and accelerating the project....
• THREAD & 150 WOG - Female threaded for connecting to male threaded pipe fittings. 150WOG working pressure, suitable for irrigation and water supply..
• SAFETY - T handle for manual on/off control, easy operation.
• Santoprene seats and stem packing reduce the risk of leakage..
• ASTM - 1-1/2’’ ball valve, suitable for indoor and outdoor use like with cess-pipe, landscape and irrigation, pool, cold water, venting, waste....
• DURABLE - Each valve individually tested for maximum safety blow-out proof stem, ageing resistant and long service life..

Sioux Chief 696-1021GF Ox Box Gas Outlet Box 1/2 NPT White

• Box is available for ½" or ¾" iron-pipe applications or ½" CSST applications in both standard and fire-rated products.
• ¼-turn ball valve for easy, secure, accessible operation.
• Recessed box is made of high-impact ABS providing the strongest finished installation for all gas appliance needs.
• Valve has CSA certification to ANSI Z21.15-1997 / CGA 9.1-M97.