Makita 5 Pack - 4.5\ Cut Off Wheels For 4.5\ Grinders - Aggressive Cutting For Metal & Stainless Steel/INOX - 4-1/2\ x .045\ x 7/8-Inch

  • ✅ 5 MAKITA Premium 4-1/2” Type 1 Flat Cut Off Wheels for Metal & Stainless Steel (INOX) | Wheel Dimensions: 4-1/2-Inch x .045-Inch x 7/8-Inch | Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders.
  • ✅ CUT 2-3X More than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup.
  • ✅ QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix.
  • ✅ AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION....
Check Stock

Dremel 709-02 110-Piece All-Purpose Rotary Tool Accessory Kit- Includes a Carving Bit, Sanding Drums, Grinding Stones, Cutting Discs, and a Storage Case , Gray

  • Carving/Engraving accessories: 194 Carving Bit (x1).
  • Grinding/Sharpening accessories: 952 Aluminum oxide grinding stone (x1), 953 Aluminum oxide grinding stone (x1), 83142 Silicon carbide grinding stone (x1), 84922 Silicon carbide grinding stone (x1).
  • Cutting accessories: 409 15/16” Thin-Cut, cut-off wheel (x12), 420 15/16” Cut-off wheel (x12), 426 1-1/4” Fiberglass-reinforced cut-off wheel (x1), 540 1-1/4” Cut off wheel (x1).
  • Cleaning & Polishing: 414 ¼” Felt polishing wheel (x4), 421 Polishing Compound (x1), 429 1” Felt polishing wheel (x4).
  • Sanding: 407 ½” Band & Mandrel (1), 408 ½” Band (6), 432 1/2” Band (6), 430 1/4” Sanding Band & Mandrel (1), 438 1/4” Sanding Band (5), 411 3/4” Sanding Discs (4), 412 3/4” Sanding Discs (13), 413 3/4” Sanding Discs (13).
  • Collets & Misc.: 401 Mandrel (x2), 402 Screw Mandrel (x1), 415 Dressing Stone (x1), Wrench (x1).
  • USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI.
Check Stock

KingTool 27pcs Angle Grinder Wheel Set Grinder Disc Set Includes 20pcs Cutting Wheel 5pcs Grinding Wheel 2pcs Flap Discs with 4-1/2 Diameter and 7/8 Arbor for Steel and Stainless Cutting Grinding

  • 27 Pack premium angle grinder wheel set consisted with 3 kinds of grinder discs: 20 pcs cutting wheel in 3/64” thick.
  • Part 1 - cutting wheel: 20 pcs cut-off wheel set is specially formulated for fast cutting in metals and stainless steel. 3/64-inch ultra thin design....
  • Part 2 - grinding wheel: 5 pcs Premium 4-1/2” Depressed Center Metal Grinding Wheels for metal and stainless steel, A24T Aluminum Oxide Grains for....
  • Part 3 - flap disc: 2 pcs P80 flap discs, Constructed of industrial grade premium zirconia for strength, durability, and extended disc life, Bevel....
  • Well Organized And Long-lasting Performance: The 27-Pack angle grinder wheel set is fully compatible with all 4-1/2 inch angle grinders with 7/8 inch....
Check Stock

Dremel 730CS 13-Piece Maker Rotary Tool Accessory Kit- Includes Carving Bits, Drill Bits, Sanding Drums and Discs, Grinding Stones, Buffing Wheels, Cutting Discs, and a Storage Case

  • Ideal for cutting, carving, engraving, grinding, drilling, sharpening, sanding, cleaning and polishing. The versatile 130-piece All-Purpose Accessory set is the complete start-up kit you need to complete a wide range of projects.
  • Accessory set includes a reusable storage case for easy organization of the included bits.
  • Carving/Engraving accessories: 105 1/32" Engraving Bit (x1), 194 1/8" Carving Bit (x1).
  • Grinding/Sharpening accessories: 8193 5/8" Aluminum oxide grinding stone (x1), 83142 9/32" Silicon carbide grinding stone (x1), 84922 3/16" Silicon carbide grinding stone (x1), 952 3/8" Aluminum oxide grinding stone.
  • Cutting accessories: 409 15/16" Thin-cut, Cut-off wheel (x12), 420 15/16" Cut-off wheel (x32), 426 1-1/4" Fiberglass-reinforced cut-off wheel (x1), 540 1-1/4" Cut off wheel (x1).
Check Stock

YON.SOU. Air Cut Off Tool with 2 pcs 3-inch Die Grinder Cut-Off Wheels, Pneumatic Metal Sheet Cutting Tool, Heavy Duty Air Cutter Cutoff Tool

  • ⚙️ COMPLETE AIR CUT OFF TOOL SET: The air cutter tool set comes with 2pcs 3" cut off wheel, 2pcs wrenches, 1pcs 1/4" NPT air fitting and 1pcs air cut off tool. This air cutter has complete accessories for you to try out and start your job right away..
  • ⚙️ AIR-POWERED&MAX SPEED 20,000RPM: The 3 inch air cut off tool is up to 20,000 RPM, which is 15% more efficient than ordinary air cutter tools, the air cutoff tool by YON.SOU. gets your job done more quickly..
  • ⚙️ WHEEL GUARD AND SAFETY SWITCH: The high speed pneumatic cut off tool is equipped with 180 degrees wheel guard which is adjustable for 360 degrees, the wheel guard is made of chrome plated alloy steel which prevents sparks flying to your face. The air cut off tool is also equipped with safety switch for maximum safety which could prevent accidental start-up..
  • ⚙️ EASY TO USE AND PRECISE TO CONTROL: The air cut off tool kit comes with 1pcs hex wrench and 1pcs hand wrench for you to easily install or replace cut-off wheel. The pneumatic cutter is made of aluminum housing which is lightweight and durable for you to precisely control the air c....
Check Stock

S SATC 4 1/2 Cut Off Wheel 50 PCS Cutting Wheels 4.5 x.040 x7/8 Angle Grinder Cutting Disc Ultra Thin Metal & Stainless Steel

  • ☞LONGEST LASTING: Cut off wheels feature metal center and ultra-thin 0.040" thickness. 50 pieces cutting disc for metal & stainless steel meet ANSI safety requirements. Grinder Wheel Dimensions: 4 1/2"x0.040"x7/8".
  • ☞PERFECT ALUMINUM: 4 1/2 cut off wheel is made with a proprietary combination of alumina particles for aggressive cutting action, providing the industry's best balance of cut life, cut rate, cut accuracy, power requirements and heat build-up, to give you unmatched cut time, consistent precise integrity, moderate power requirements and relatively low heat build-up.
  • ☞FITS ANY ANGLE GRINDER: 50 PCS cut-off wheels for metal & stainless steel fast burr-free cutting feature 4 1/2"x0.040"x7/8" , compatible with Die Grinder, Air Cut Off Tool and Electric Cut Off Tool..
  • ☞MULTIPLE UESES: Cut off wheels 4 1/2 inch are designed for cutting fiberglass, steel, iron, plastic, stainless steel including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel , and other ferrous metals..
  • ☞Attention Please: Cutting disc is made in accordance. Before using these, please wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).
Check Stock

COMOWARE 4 1/2\ Cut Off Wheel 25 Pack, Cut Off Wheels 4 1/2 x 7/8 Inch Ultra Thin, Metal and Stainless Steel Cutting Wheel for Angle Grinder, General Purpose Metal Cutting Disc for Angle Grinder

  • 【SHARP & CLEAN CUTTING】 This 25-pack 4-1/2 x 7/8-inch cut off wheel set is specially formulated for fast cutting in metals and stainless steel. The extremely thin .045-inch wheel design helps for clean, straight cuts with minimal burr..
  • 【PREMIUIM MATERIAL】 These 4-1/2" cut off wheels are specifically manufactured from corundum, aluminum oxide grain that provides high hardness, durability and abrasion resistance. The internal double fiberglass reinforcement provides ultimate safety and longer service life in these ultra-thin cutting wheels..
  • 【GENERAL PURPOSE METAL CUTTING】 Proprietary aluminum oxide grain combination helps these angle grinder cutting wheels deliver aggressive cutting action on carbon steel, sheet metal, rebar steel, stainless steel and other ferrous metals (not for masonry or concrete)..
  • 【SAFETY & STABILITY】 Reinforced by 2 full sheets of fiberglass and zinc-iron alloy rings for extra durability, this very hard cutting disc delivers stable performance with less wheel shatter..
  • 【GREAT PERFORMANCE】 These 4.5" cut off wheels for metal are compatible with all 4-1/2 inch angle grinders with 7/8 inch arbor. Up to 13,300 RPM (003ecommon 13,000 RPM) rotating speed for maximum productivity..
Check Stock

Milwaukee 5 Pack - 7 Inch Cut Off Blades for 7.25 + Circular Saws - Aggressive Cutting for Metal & Stainless Steel - 7 x .09 x 5/8-Inch

  • 5 Milwaukee Premium Metal & Stainless Steel Cut Off Blades for 7” Grinders & Circular Saws 7.25" or Greater | 7-Inch x 3/32 -Inch with Standard....
  • Extremely thin 3/32-inch wheel design for fast, straight cuts with minimal burr Industry's fastest rotating cutting speed for maximum productivity....
  • Industry's fastest rotating cutting speed for maximum productivity with the most demanding Metal & Stainless Steel cutting applications | Cuts up to....
  • Engineered in Brookfield, WI for Milwaukee 7 1/4" Circular Saws and Worm Drive Circular Saws with standard 5/8" arbor size.
  • Consistent performance from wheel to wheel through superior manufacturing process. Tested for balance, resulting in smooth, vibration free cutting.....
Check Stock

YON.SOU Air Cut Off Tool with 2 pcs 3-inch Die Grinder Cut-Off Wheels Pneumatic Metal Sheet Cutting Tool Heavy Duty Air Cutter Cutoff Tool

  • ⚙️ COMPLETE AIR CUT OFF TOOL SET: The air cutter tool set comes with 2pcs 3" cut off wheel, 2pcs wrenches, 1pcs 1/4" NPT air fitting and 1pcs air....
  • ⚙️ AIR-POWERED&MAX SPEED 20,000RPM: The 3 inch air cut off tool is up to 20,000 RPM, which is 15% more efficient than ordinary air cutter tools,....
  • ⚙️ WHEEL GUARD AND SAFETY SWITCH: The high speed pneumatic cut off tool is equipped with 180 degrees wheel guard which is adjustable for 360....
  • ⚙️ EASY TO USE AND PRECISE TO CONTROL: The air cut off tool kit comes with 1pcs hex wrench and 1pcs hand wrench for you to easily install or....
  • ⚙️ VARIOUS APPLICATIONS: The high speed pneumatic cutoff tool is designed to cut through sheet metal, plastic pipes, composite material, exhaust....
Check Stock

Cut Off Wheels and 1 Mandrel Kit, 20Pcs 3” x 1/16” x 3/8” Thin Cutting Discs with 1 Mandrel for Die Grinder

  • 【Material】The cutting wheel is made of Proprietary aluminum oxide grain combination ensures durable long wheel life and fast bur-free cutting.
  • The mandrel is made of A3 carbon steel with black plating, durable..
  • 【Function】The ultra-thin cutting wheel can achieve precise and fast cutting, while reducing burrs and material waste, minimal burrs and material waste. 3/8" & 1/4'' Mandrel are designed to fit mini cut-off wheels..
  • Perfect for General Purpose metalworking: Stainless Steel, Sheet Metal, Ferrous & Non-ferrous Metal, Cast Iron, Angle Iron, Rebar, Aluminium and Copper Cutting..
  • 【Fit for Tools】The Cut-off wheel mandrel with 1/4” Shaft, for most die grinder, air tools and drill rotary tools. Pay attention to connector size, easy to mount and demount. It's a great essential die grinder accessory..
  • 【Package】20pcs 3-inch Cut-Off Wheels + 1pc Adaptor kit.
Check Stock

amoolo 25 Pack Cut Off Wheel 4 1/2 Angle Grinder Thin Cutting Wheels for Metal & Stainless Steel 4.5 x1/16 x7/8

  • WHAT YOU GET - 25 Pieces 4-1/2 Inch Cut Off Wheel, with 7/8" arbor, 1/16" Thickness. Up to 13,300 maximum RPM setting (>common 13,000 RPM). Compatible....
  • WHY CHOOSE US - longer using life enhanced thickness: 1/16 Inch (0.0625 inch) cutting wheel guarantees its longevity than common 0.045 inch thin....
  • WHAT ARE THEY MADE FROM - made by complextro-plated white fused alumina grain, more stubborn and harder than plain white alundum grain. Reinforced by....
  • WIDE APPLICATIONS - amoolo grinder cut off wheels are ideal for Metal Sheet, Aluminum, Steel, Wood, Platics. Made for DIY projects, household....
  • WHAT ELSE WE CAN OFFER - 90 days warranty are available for all of our customers. Hold 90 Degree to Cut. Not for abrasive or grinding. Wear body....
Check Stock

3Pack 4.5" Diamond Metal Cutting Cut Off Wheels for 5000+ Cuts on Rebar, Steel, Iron and INOX, Angle Grinder Diamond Disc with 7/8" Arbor

  • DURABLE: 1 equals 100, OA-BRES diamond cutting disc delivers 5,000+ more cuts for metal with much lower cost per cut compared to bonded cut-off wheels. Premium Vacuum brazing technology, brazing high quality diamond sand to the edge of the steel core, coated with abrasive materials on both sides, with high performance, durability and service life..
  • EFFECTIVE: Diamond sand specially designed for cutting various metals, ideal for dry cutting of metal, rebar, iron, brass profiles, aluminum, different types of pipes and sheet metal..
  • SAFETY:Solid steel wheel body greatly reduces risk of shatter and injury,diamond cutting edge is more convenient in usage than any abrasive wheel: fewer sparks, no dust, no smell, no overheating..
  • COMPATIBILITY:OA-BRES Professional brazed diamond saw blade compatiable with all brands of die grinders, angle grinder, cut off toos, compact saw with a 7/8" (22.22 mm) Arbor, and any other tools with a 7/8" arbor..
  • INCLUDE: 3 Pack 4.5-inch(115mm) diamond cut-off wheels set with a 7/8" ( 22.22 mm) Arbor, MAX RPM 13200..
Check Stock

4th Birthday Shirt boy Gifts for 4 Year Old Boys Shirts Toddler Tshirt Fourth Charcoal Blue 5T

  • 50 PACK Premium 1/16" Wheel Profile for Fast, Burr Free Cutting Through Thicker Material..
  • 4 Inch Cut Off Wheel Is Designed for Use With Most Right Angle Electric and Pnuematic Grinders..
  • Constructed of 2 Bonded Sheets of Fiberglass Mesh for Durability and Safety.
  • Rugged Flat Center Steel Reinforced 5/8" Arbor..
  • Features Aluminum Oxide Abrasive Composition for Quick and Accurate Cuts..
Check Stock