Categories

Best 4 Layer Pcb

Helping Hands Soldering, Toolour Magnetic Helping Hand for Soldering, 4 PCB Circuit Board Holder and Flexible Helping Arms, Third Hand Tool with Heavy Duty Base for Electronic Repair Hobby Craft

  • ...action to the steel base. We included two 9.8″ arms, two 5.9″ arms helping hand arms, completely free your hands up and work easier than ever before. The 360° rotating alligator clip allows you to be more flexible in welding work..
  • Magnetic PCB Holder Pillars: 4 small pillars can hold a PCB board by their multi-layer or tips through the location hole component point. Full metal body is anti-rust and corrosion-resistant, powder-coated promises a longer usage. To make sure the PCB you worked on can be positioning steadily, the pillars’ tips are better to hold boards by 4 location holes..
  • Stainless Steel Base: 9″ x 5. 9″ heavy duty base with industrial-grade weighted construction, never tip over, powder-coated iron base. 4 pcs rubber feet prevent the stable soldering station from sliding around on your workbench, even protect the work surface against scratches and scuffs. NOTE: Due to different manufacturers’ production batches, the iron plate may also be updated at any time(eg with holes or engraved LOGO). Under normal circumstances, it will not affect your normal use..
  • Widely Used & Service: Helping hands soldering for any electronic, welding, crafting, painting, figurine and hobby work, or any precision project that requires extreme accurac....
Check Stock

MKS Gen L V2.0 3D Printer Integrated Motherboard Controller PCB Board A4988/DRV8825/TMC2208/TMC2130 Like Ramps 1.6 MKS Gen V1.4 Mainboard 1PCS

  • ❤️ Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable.
  • ❤️Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly.
  • ❤️ Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS.
  • ❤️TFT24/28/32/35 & Available to connect external large stepp drivers Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently.
  • ❤️Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces.
Check Stock

250pcs Standoffs Nylon M2 M3 Male Female Hex Column Standoff Screws Nuts Assortment Kit for Communication Electroplating M3 Male Standoff A

  • 250pcs standoffs are made of durable environmentally friendly nylon PA66, which has stable and long-lasting acid resistance, alkali resistance, insulation and signal interference resistance..
  • The waterproof nylon spacer support is rust-proof and easy to clean. You only need to clean it with a cloth..
  • There are 4 different kits to meet your building needs, including various male or female brackets, nuts and screws..
  • Threaded standoff is very suitable for installation between the PCB circuit board and the machine board. It is very suitable for creating hot channels between chips, or creating multi-layer and multi-layer "nerd" homemade circuit board arrays..
  • They are not easy to slip when used correctly. It is very suitable for installing boards between PCB circuit boards and machines, and is widely used in communications, electroplating, medical equipment, office equipment, electronic products and other industries..
Check Stock

CoolerMaster MASTERACCESSORY Riser Cable PCIe 4.0 x16 - 300mm, PCIe 4.0 Compatible, EMI Shielded 30 AWG, Protective ABS Casing for Graphics Card

  • PCIe 4.0 Compatible: While providing twice the bandwidth of PCIe 3.0, the Gen 4.0 riser cable remains backwards compatible with a maximum transfer rate of over 64Gb/s (bi-directional) and fully supports the 16GT/s bit rate of PCIe 4.0 devices..
  • Ultra Durable PCB: The multi-layer coated PCB provides best-in-class performance under high thermal loads, cable flex, and moisture resistance..
  • Heavy Duty Shielding: EMI shielded 30 AWG tinned copper wires ensure minimal signal delay and electromagnetic interference-free operation..
  • Gold-Plated Pin Connections: Gold-plated PCI pins allow maximum durability with a rated 400g of retention force per contact pair..
  • Protective ABS Casing: UV resistant ABS casing protects cable connection points from rough handling..
Check Stock

MAXSUN iCraft B550 Gaming M-ATX Motherboard AMD AM4 Zen 3, DDR4, PCIe 4.0, SATA 6Gb/s, Dual M.2, USB 3.2 HDMI/DP, 2.5G LAN Micro ATX AMD Ryzen 5000 Series Processors CPU

  • 【AMD AM4 Socket】Supports AMD Zen 3 Ryzen 5000((R9 5950X overclock up to 4.79GHz) & Zen 2 Ryzen 3000 Series CPUs, AMD Zen 2 Ryzen 4000 with Radeon Graphics Cards GPU Processors APUs..
  • 【Super Power Design with 8-Layer PCB】14+2 phases digital power design, providing durable and stable performance. The 8-layer PCB quickly dissipates heat around the VRM to improve overall system stability and give the CPU more overclocking headroom..
  • 【Cooling New Design】Active VRM Heatsink and Large M.2 Heatsink. A VRM heatsink provides a large contact area for the MOSFETs and chokes, enables more efficient cooling for better performance and wattage resistance. The M.2 heatsink keeps the M.2 SSD at the optimum operating temperature for consistent performance and reliability..
  • 【Faster Connectivity】Dual Channel DDR4 Memory(Up to 128 GB 4*DIMMS ,MAX:4866 MHz), Ultra Durable PCIe 4.0 x16 Slot & Ultra-Fast M.2 SSD NVMe PCIe 4.0 x4 Connectors, USB 3.2, HDMI/DP, 2.5G Ethernet and 7.1 Channel HD Audio.
  • 【iCraft Sky Light RGB】Adopt skylight RGB, emits brilliant lights. Provide 2*3-pin ARGB(5V) and 2*4-pin NRGB(12V.). Lighting effects can be controlled via onboard buttons or dedicated software.
Check Stock

Troglodyte

  • Intel LGA 1200 socket: Ready for 11th Gen Intel Core processors.
  • Enhanced power solution: 8+1 power stages, 6-layer PCB, ProCool socket, and durable capacitors for stable power delivery.
  • Comprehensive cooling: VRM heatsink, flexible M.2 heatsink, PCH heatsink, hybrid fan headers and Fan Xpert 2+.
  • Next-gen connectivity: PCIe 4.0, Realtek 2.5Gb Ethernet, Intel Wi-Fi 6, rear USB 3.2 Gen 2, front USB 3.2 Gen 1 Type-C and Thunderbolt 4 support.
  • Two-way AI Noise-Cancelation: Reduce background noise from the microphone and audio output for crystal-clear communication in games or video conferences.
Check Stock

4X Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY

  • Prototype PCB for Arduino Mega 2560 R3 Shield Board DIY..
  • PCB Dimension: 101.6mm x 53.34mm / 4" x 2.1".
  • PCB Thickness: 1.6mm / 0.063", Material: high quality FR-4 glass fiber PCB..
  • All holes are plated through. Top and bottom side are identical copper layers. Pads grid (pitch) 2.54mm / 0.1", hole diameter 0.9mm..
Check Stock

RunJRX Eva Keyboard PCB Foam 108 Layout,Poron Switch Pads 120Pcs and Keyboard Sound Dampeners for Custom Keyboard (RJ-146)

  • 【EVA MATERIAL】High density, micro-fine and homogeneous cell structure with excellent resistance to compression deformation. Widely used for sealing and vibration damping of components in communications, computers and household appliances..
  • 【SWITCH PADS】It is a new project to update the keyboard by filling the gap between the switch and the pcb, reducing vibrations and typing sounds, keep the typing feel consistent.We customize the bottom of the material has a layer of film plus non-stick adhesive backing will be more resistant to tearing, support repeatedly tear off and then stick on..
  • 【KEYBOARD PCB FOAM】Modular design fits 108 Layout, no need to cut, easy to install. It is a new project to update the keyboard by filling the gap between the pcb and the positioning board, reducing vibrations and typing sounds..
  • 【USEFUL TOOLS】We prepar a plastic prying bar to help you dismantling your keyboard.Tweezers to help you put the switch pads..
  • 【PACKAGE INCLUDES】EVA Keyboard Pcb Foam 108 Layout x 1, Poron Switch Pads x 120, Plastic Prying Bar x 1, Tweezers x 1..
Check Stock

CERWIN VEGA CVP2500.5D 1100W RMS 5-Channel Class- D Amplifier

  • Updated High-Efficiency Full Range Digital Topology : Enhanced Power IR Digital Chipset.
  • Conformal-Coated 4-layer PCB : Remote Turn On Configurator – REM/DC/VOX.
  • Boosted RFI (Radio Frequency Interference) Rejection : Compact Matching Heatsink Platform Dimensions.
  • Accepts : HI and LO Level Input Up To 12V Water-Resistant.
Check Stock

HiLetgo 5pcs DRV8825 Stepper Motor Driver Module for 3D Printer RepRap 4 RAMPS1.4 StepStick

  • 4-layer, 2 oz copper PCB for improved heat dissipation.
  • Can interface directly with 3.3 V and 5 V systems.
  • Simple step and direction control interface.
Check Stock

Leopold FC750R Navy/Blue PD TKL Double Shot PBT Mechanical Keyboard Cherry MX Blue

  • 87Keys High-End Mechanical Keyboard CHERRY MX.
  • 1.5mm PBT Double Shot / Interface : USB & PS2.
  • Key Pitch : 19mm / PCB : FR-4 Dual Layer.
  • Weight : 1kg / Dimensions : 362 x 140 x 33mm.
Check Stock

Gikfun Electronic Hourglass led DIY Kits Welding Practice Board Blue Ray EK1886

  • This is a beautiful electronic hourglass that is fun to build and nice to look at when finished, it is not only a PCB board for practicing welding....
  • Comes with English user manual and online PDF file, which will guide you how to finish step by step, perfect for school basic electronics experiment....
  • The suite adopts double layer PCB, and the circuit consists of 30 pieces white LED blue ray..
  • Under the control of MCU program, it displays analog hourglass image..
Check Stock

CZH-Labs DIN Rail Mount 12V Passive 2 SPST-NO 30Amp Power Relay Module.

  • DIN Rail Mount Passive 2 Channel SPST-NO 30 Amp Power Relay Module..
  • High quality DIN rail mount carrier, can support width 35mm /32mm / 15mm rail..
Check Stock