Categories

Best 4 Layers Rigid Pcb

Aven 17010 Adjustable Circuit Board Holder ESD Safe

  • Ideal for clamping PCB, for soldering/desoldering or rework.
  • Retractable to accommodate various board sizes up to 198mm wide and up to 4mm thick.
  • Rubber feet of the base ensure stability.
Check Stock

Liftmaster K001A6837 Logic 4 Board Commercial OEM Genuine

  • 【Dimension】 -Size：200mmx150mm/7.87"x5.91"(L*W).
  • 【Material】 -The copper clad laminate is made of FR-4 glass fiber and copper, the number of layers issingle-sided.
  • 【Features】- The copper clad board is resistant to high temperature, is not easily oxidized, is not easily deformed, and is convenient for welding.
  • 【Application】 - PCB circuit boards are very suitable for making PCB circuit boards and models. It is widely used in product development, DIY experiment, maintenance, production, etc.
  • 【Noted】 -The product may be slightly scratched or dirty during transportation, which will not affect its use.
Check Stock

zgs78hh 18V Battery Chip Protect Board Replacement Battery Protection, Circuit Board for Makita BL1830 BL1850

  • 【Dimension】 -Size：200mmx150mm/7.87"x5.91"(L*W).
  • 【Material】 -The copper clad laminate is made of FR-4 glass fiber and copper, the number of layers issingle-sided.
  • 【Features】- The copper clad board is resistant to high temperature, is not easily oxidized, is not easily deformed, and is convenient for welding.
  • 【Application】 - PCB circuit boards are very suitable for making PCB circuit boards and models. It is widely used in product development, DIY experiment, maintenance, production, etc.
  • 【Noted】 -The product may be slightly scratched or dirty during transportation, which will not affect its use.
Check Stock

ARCELI Prototype Screw/Terminal Block Shield Board Kit for Arduino MEGA 2560 R3 DIY Soldered

  • PCB: FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm. Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm. Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm..
  • Terminal Block: Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs ). Wire range 26~16AWG, strip length 5mm, screws M2 steel, pin header and cage brass..
  • Female Header Socket: Pitch 0.1"/2.54mm, pin length 15mm / 0.59" Single row 10pin x1pcs, singal row 8pin x 5pcs, dual row 18pin x1pcs..
  • Note: This is not original Arduino product.it only a substitute accessories from ARCELI.
Check Stock

Barska BH11982 Loaded Gear AX-400 50\ Double-Sided Hard Rifle Case with Foam,Black

  • Rifle Storage: The hard rifle case is designed to carry up to two 50" long rifles or shotguns in its double-sided and separate storage compartments..
  • Secure Locking: The case features 8 quick access latches with built-in key locks, as well as 4 padlock adaptable mounting points for added security..
  • Protective Interior: The interior of the case is lined with shock absorbing foam liner, and comes with 4 layers of removable egg crate foam..
  • Solid Construction: The exterior of the rifle case is made of rigid ABS and has an aluminum frame to withstand everyday abuse..
  • Easy Transport: The carrying handle and carry strap allow bringing the rifle case all along the way..
  • Designed to carry up-to two 50 Inch long rifles or shotguns in its 2 separate storage compartments.
  • Rigid ABS and black aluminum frame offers added reinforcement.
  • Eight key latch locks and four padlock adaptable fittings.
  • Case is lined with shock absorbing foam and includes four layers of removable egg crate foam.
  • x 13.5 Inches Weight (lbs.): 22 lbs.Kindly refer the user manual attached below for troubleshooting steps and instructions..
Check Stock

GRAYHILL 70M-IAC5 I/O Module

  • 4 DPDT signal relay module. TAKAMISAWA RY24W-K high quality relays, switch contact material - gold overlay silver-palladium..
  • Darlington transistor circuits drive relay coil, LED indicator for each relay channel..
  • High quality screw terminal block. FR-4 fiber glass PCB, dual copper layers..
  • Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the carrier can be taken apart for panel mount use..
  • Datasheet: https://images-na.ssl-images-amazon.com/images/I/91Ml0Tph-rL.pdf.
Check Stock

MECCANIXITY PCB Board Double Sided Printed Circuit Prototyping Boards Plated Through Holes for DIY Soldering Electronic Projects, 80mmx120mm, Green Pack of 4

  • These PCB boards are great for assembly of a point to point style electronics board. Suitable for countless small electronics projects such as building a robot. If you are working with hobby electronics and want a more permanent circuit solution but don't want to design your own PCB, these are great for you!.
  • The prototyping boards we provide here are in the size of: Dimension: 80mm x 120mm / 3.15 x 4.72 inch (W*L).
  • They are made of FR-4 glass fiber, double sided with tinned through holes. This is a fast easy way to build small projects, the boards are durable and the tinned holes can take heat without lifting off..
  • Easy to cut with a rotary tool. The pre-drilled holes in each corner are great for building with two layers..
  • Please read the measurements before ordering if you are concerned about the size..
Check Stock

DollaTek StepStick 4-Layer DRV8825 Stepper Motor Driver Module for 3D Printer Reprap RP A4988

  • Simple step and direction control interface.
  • It can directly interface with 3.3V and 5V systems.
  • Thermal shutdown overtemperature, shutdown overcurrent, and under-voltage lockout.
  • 4 layers, 2 oz copper PCB for better heat dissipation.
Check Stock

Ultra-Small RPi GPIO Terminal Block Breakout Board Module, for Raspberry Pi

  • The item has been soldered and assembled. Support for Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, Pi Zero-W..
  • Terminal block pitch 2.54mm/0.1", wire size range 28AWG to 18AWG, strip length 4.5mm, screw M1.6 steel, pin header and cage copper..
  • FR-4 fiber glass PCB, dual copper layers..
  • 2x20 positions header connect to Raspberry Pi board..
  • Packing list: 1x terminal block breakout module, 4x M2.5x6mm screws, 4x 10mm nylon standoffs. 2x 11.5mm brass standoffs, 1x small slotted screwdriver (NOTE: the item not include Raspberry Pi Board)..
Check Stock

Electronics-Salon Screw Terminal Block Breakout Module, for Arduino MEGA-2560 R3.

  • Terminal Block Breakout Module - for Arduino MEGA-2560 R3. the item has been soldered and assembled..
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
  • With power on LED indicating. red reset button on the side. with a ICSP adapter connect header..
  • FR-4 fiber glass PCB, dual copper layers..
  • NOTE: the item not include Arduino Mega module.
Check Stock

Electronics-Salon Prototype Screw/Terminal Block Shield Board Kit for Arduino MEGA-2560 R3.

  • Prototype Screw/Terminal Block Shield Board Kit For Arduino MEGA-2560 R3..
  • FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm..
  • Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm. Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm..
  • Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs )..
Check Stock

PCI-E 1 to 4 PCI Express 16X Slots Riser Card Mining Modules PCI-e 1X to External 4 PCIe Slots Adapter Pcie Port Multiplier-GOLDEN BLUE

  • The PCI-E expansion riser card adapter is designed to convert 1 PCI-E 1X slot into 4 PCI-E 16X slots. The 4 PCI-E 16X slots could connect sound card,....
  • imultaneously support 4 PCI-E 16X devices, non-interference. Customized for mining BTC. 2 layers PCB board design. Compliant with PCI express 2.0 &....
Check Stock

MECCANIXITY PCB Board Double Sided Printed Circuit Prototyping Boards Plated Through Holes for DIY Soldering Electronic Projects, 20mmx80mm, Black Pack of 5

  • These PCB boards are great for assembly of a point to point style electronics board. Suitable for countless small electronics projects such as building a robot. If you are working with hobby electronics and want a more permanent circuit solution but don't want to design your own PCB, these are great for you!.
  • The prototyping boards we provide here are in the size of: Dimension: 20mm x 80mm / 0.79 x 3.15 inch (W*L).
  • They are made of FR-4 glass fiber, double sided with tinned through holes. This is a fast easy way to build small projects, the boards are durable and the tinned holes can take heat without lifting off..
  • Easy to cut with a rotary tool. The pre-drilled holes in each corner are great for building with two layers..
  • Please read the measurements before ordering if you are concerned about the size..
Check Stock