Best 4 Stroke Engine Cooling
Diesel Motor Engine,3.6Kw 4 Stroke Single Cylinder Air Cooled Vertical Engine,Heavy Duty Diesel Motor Engine for Road Cutting Machine,Grinding Machine
- 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
- 【DIESEL ENGINE SPECIFICATIONS】Model:186F Туре:Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system:Direct injection Bore*stroke(mm):86x70mm Displacement capacity(cc): 406cc.
- 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
- 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
- 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check Stock4HP Outboard Motor Boat Engine, 4 Stroke Heavy Duty Outboard Motor Fishing Boat Engine with Water Cooling System (4-Stroke 4HP)
- ...l efficiency second to none and a newly redesigned carrying handle and holding grip make it convenient to transport!.
- ②DETAILS: Model: 4.0 horsepower jet pump.
- Refueling method: No. 92 unleaded gasoline is recommended..
- ③SIZE INFORS: Packing volume: 95*42*29cm/37.4*16.5*11.4inch.
- Gross weight/net weight: 13(28.66lb)/9.7kg(21.3lb).
- Recommended engine oil: four-stroke engine oil.
- ④ATTENTION:Use four-stroke special engine oil (automobile and motorcycle engine oil).
- Add oil according to the scale indication on the oil dipstick (the rotating cover),do not add more or less.
- The fuel tank of the four-stroke outboard engine can only be filled with No.92 pure gasoline.
- Gently press the oiler on the carburetor until the oil flows to the top of the transparent oil pipe..
- ⑤WIDE APPLICATION: It can be marched with inflatable boats, rubber boats or f....
Check StockUniversal Cylinder Liner Puller Heavy Duty Diesel Engine Cylinder Liner Puller Fits for Mack Cummins CAT on Wet Liner from 3-7/8” to 6-1/4” Bore, Replace for OEM PT-6400-C M50010-B 3376015
- 【PROFESSIONAL DIESEL ENGINE】4-stroke Air- Cooled Diesel Engine.Through advanced software analysis and optimization design, the reliability of diesel engine in structure and cooling is ensured. Optimize fuel system and intake and exhaust system to save energy and fuel..
- 【DIESEL ENGINE SPECIFICATIONS】Model:186F Туре:Single-cylinder, vertical, 4-stroke air- cooled diesel engine Combustion system:Direct injection Bore*stroke(mm):86x70mm Displacement capacity(cc): 406cc.
- 【DIESEL ENGINE PARAMETER】Oil System: Pressure and Splash Engine Cooling Type: Forced Air Cooling.
- 【SHAFT PARAMETER 】 Shaft Type: Keyed - Straight Shaft Diameter: 1" Diameter, 1/4" Keyway Shaft Length: 72.2mm (2-5/6" Length) Shaft I.D. Thread Size: 7/16-20UFN-2B, 20mm depth.
- 【WIDE APPLICATION】It is widely used in small agricultural machinery, such as micro-tiller, pastoral management machine, irrigation and drainage machine, generator set, small transport vehicle, small walking tractor and other fields..
Check StockPontoon [Explicit]
- ...mended Propeller range: 3 -9"1/4''x8",Recommended Lubricant: 2 Stroke Lubricating oil,Mixing ratio: Fuel:oil=50:1,Trim and tilt system: Manual Tilt,Standard fuel tank capacity: 24L.
- 【12HP 2 Stroke Outboard Boat Motor】Using 2 Stroke Power, 12HP boat motor: Air Cooling Technology To Improve The Reliability Of The Whole Machine.Convenient Use,Easy Operation And Convenient Maintenance: Travel Safer,More Reliable,More Corrosion Resistant,More Beautiful,More Durable,More Energy Efficient,More Environmentally Friendly..
- 【Durable】Superior outboard anti corrosion system and anodes for increased durability. Durable cast aluminum construction for superior corrosion protection, suitable for both freshwater and saltwater..
- 【Water Cooling System】Superior engine water cooling system for improved engine performance. Easy pull off engine cover with push button latch for instant motor access. Standard CDI ignition system for easy starting and improved performance.Perfect match inflatable boats, fishing boats, sailboats, and small yachts.Performance More Superior,quick start,positions the motor at several angles.
Check StockTFCFL 2 Stroke 18HP Electric Outboard Motor,Outboard Motor Boat Engine Water Cooling CDI System,246CC Heavy Duty Boat Engine Short Shaft 13.2KW
- 【2 STROKE 18HP OUTBOARD MOTOR ENGINE】 Displacement: 246CC.
- Packing size:133x71x38.5cm/52.3''x27.9''x15''.
- 【Main Parameters】Control System: #93 gasoline.
- Recommended Propeller range: 3 -9"1/4''x8".
- Recommended Lubricant: 2 Stroke Lubricating oil.
- 【 2 Stroke 18HP Outboard Motor 】Water cooling technology to improve the reliability of the whole machine.
- Light weight, easy to carry, unique appearance, large tank capacity.The engine oil must be a two-stroke special engine oil. Note:The two oils must be stirred evenly.
- After use, the fuel in the carburetor must be completely discharged..
- 【 High Efficiency 】Outboard vertical mount engine design for increased power, performance and durability, superior CDI Igniti....
Check StockCUKUSIN Outboard Engine 4 HP 4 Stroke Outboard Boat Motor Air Cooling System, Strong Shaft
- 【Convenient Use,Easy Operation And Convenient Maintenance】: Durable:Comparable Lubricating System For Four Stroke Outboard Engine Maneuverable and safe twist grip throttle control. Its weight is 15 KG..
- 【Out Board Motor Speed and Luxury Rack】: 4-Stroke, 4.0 HP - Using 4 Stroke Power, Air Cooling Technology To Improve The Reliability Of The Whole Machine...
- 【Universal Motors, High Performance, Reliable Quality】: Travel Safer,More Reliable,More Corrosion Resistant,More Beautiful,More Durable,More Energy Efficient,More Environmentally Friendly.Suitable for: Freshwater and saltwater..
- 【Superior Air-Cooling System and Big Fuel Tank】: Outboard Boat Motor installed with own patented engine Air-cooling system, allows you to fish all day long without overheating. Propeller Spec. 18cm..
- 【Gift】We will pack the LIFT JACKET(gift), one more throttle cable comp(gift), one more clutch(gift), one more propeller(gift) together, those commonly used material will be convenient for you to use the motor..
Check StockMOTOOS 80CC 24' 26' 28' 2 Stroke Bike Bicycle Motorized Cycle Engine Motor Kit (Red)
- Single Cylinder, Air-Cooling, 2-Stroke Gasoline Engine. This 2-stroke 80cc engine kit is perfect to upgrade the regular bike to a motorized bike, which allows you to enjoy riding at a faster speed, which can reach 38km/h as fast as a motorcycle or scooter..
- The bicycle engine kit is designed for users who want to retrofit and upgrade a bicycle. Suitable for most 26" and 28" bicycles with V-frames. The frame should have 9-11" of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1")..
- Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km..
- Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
- Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km..
- Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
- The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully..
Check StockTBVECHI Engine Set 200cc 250cc CG250 Engine Motor & 5-Speed Manual Transmission CDI Dirt Bike 4-Stroke Vertical ATV Engine Single Cylinder
- Please Note: installation manual is not included.
- professional installation is highly recommended..
- Engine Type: Single Cylinder, 4-Stroke, Vertical.
- 【Specifications 2】Fuel Supply: Carburetor Atomization.
- Minimum fuel consumption rate: ≤354 kw.h.
- 【Compatible With】OEM 200cc 250cc 4-stroke Engine with Manual Transmission fits most Chinese made ATV 200cc 250cc since the mounting holes are same, please do not buy if your engine with starter bottom mounted since the mounting holes are not same.It is 200cc 250cc 4-stroke Engine with Manual Transmission (4 forward).
- 【Package Includes】1 X Engine assembly.
- This engine assembly comes with Intake Pipe, Drive Sprocket, Sprocket cover & Spark Plug(Most of the accessories are already installed on the engine) but doesn't come with Carburetor, Battery, ....
Check Stock6HP Outboard Motor 4-Stroke Boat Motor Kayak Motor Fishing Boat Motor Inflatable Boat Motor Engine Water Cooling System 6HP 4-Stroke Air-Cooling
- 【6HP 4-Stroke Engine】The 6HP 4-Stroke engine provides all the power you need for motoring in your boat. The superior engine air cooling system....
- 【Product Parameters】Max. Output: 6.0hp.
- 【360° Steering】360 degree rotation, rotating in the opposite direction without changing speed. Allows you to reverse without shifting gears. It....
- 【Transistor Non-contact Electronic Ignition】The ignition system of this motor is a transistor non-contact electronic ignition system. You can....
- 【Inline Propeller Design】The propeller of this item adopts an inline design, with high-speed engine that can more effectively play the outboard....
Check StockSUNROAD 80cc Bicycle Engine Kit 24″ 26″ 28″ 2-Stroke Motorized Bicycle Petrol Gas Engine Kit Red
- Single Cylinder, 2-Stroke Gasoline Engine. Air-Cooling,Equipped with the 2-stroke 80cc single cylinder gasoline engine, our bike motor kit is suitable for most bikes with v-frame. It will better upgrade your regular bike to a motorized bike and let you enjoy the fun of riding..
- The bicycle engine kit is designed for users who want to retrofit and upgrade a bicycle. Suitable for most 26″ and 28″ bicycles with V-frames. The frame should have 9-11″ of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1″)..
- Key parameters: bore and stroke-47mm & 40mm, Max. power 3 horsepower/5000r/min, Super fuel-efficient, only consuming 2.5L fuel/100km..
- Lubrication Oil: oil for 2-stroke petrol engine (or oil for 10W/40.10W/30).
- Mixing Ratio of Fuel and engine Oil: 16:1 for new sets, 20: 1 after running 500km..
- Mode of Engine: Single cylinder, air-cooling, 2-stroke Natural air cooling.
- The rider needs some basic hardware tools, skills and around 2-3 hours to install. Add some lubricant into the air cylinder before starting. NOTE: Due to the chemical reaction of electrophoresis, the engine motor of the product will have a certain proportion of color difference. Please mind to buy it carefully..
Check StockTFCFL 6HP 2-Stroke Electric Outboard Motor,Heavy Duty Outboard Motor Boat Engine Water Cooling CDI System, Tiller Control, Inflatable Fishing Boat Engine,Short Shaft 40cm,4.4KW
- ... The outboard boat motor using 6 HP 4 stroke strong power high quality with friendly price.Max. Output: 6.0HP.
- 【Air Cooling CDI System】This outboard boat motor is equipped with its own patented engine air cooling system, allowing you to fish all day without overheating. Features 360 degree steering rotation for reverse without gear shifting..
- 【Durable and Safety】Vertically installed engine design can improve power, performance and durability, high-quality carbonation system with ignition bulb can improve efficiency, twisting the throttle handle and engine stop button to improve Responsive, excellent outboard anti-corrosion system and anodes to improve durability.
- 【6HP 4 Stroke Outboard Boat Motor】Air cooling technology To improve the reliability of the whole machine. Convenient use and easy operation, travel safer, more reliable, more corrosion resistant, more beautiful, more durable, more energy efficient, more environmentally friendly..
Check StockMinn Kota E-Drive - Electric Outboard - 2Hp - 48V - 20" Shaft
- ♛ 246CC Outboard Stroke Petrol Heavy Duty Boat Engine Motor Description -- Displacement: 246CC.
- Recommended Lubricant: 2 Stroke Lubricating oil.
- ♛ Outboard Stroke Motor Boat Engine Works with little noise.Economical and compact structure. Durable, lightweight and and easy to carry,anti-corrosive construction. forward and neutral design.Maneuverable and safe twist grip throttle control.Packing size: 133x71x38.5cm.
- Recommended Propeller range: 3 -9"1/4''x8".
- ♛ Outboard vertical mount engine design for increased power, performance and durability, superior CDI Ignition system for increased efficiency, twist grip throttle handle and engine stop button for improved response..
Check StockGAOLEI 323CC Outboard Motor Boat Engine, 4 Stroke 20 HP Heavy Duty Outboard Motor Marine Inflatable Fish Boat Engine with Water Cooling System CDI Ignition(Black)
- [20 HP 4 Stroke Outboard Boat Motora]Air cooling technology To improve the reliability of the whole machine. Convenient use and easy operation, travel safer, more reliable, more corrosion resistant, more beautiful, more durable, more energy efficient, more environmentally friendly..
- [High Performance Motor] Model: 4 Stroke 20 HP.
- Displacement: 323CC, Gear Ratio: 2.08(27:13), Maximum Output Power: 14.7kw.
- Bore and Stroke: 59x59mm, Start System: Manual Start, Fuel: #92 Lead free gasoline.
- [Water Cooling CDI System]This outboard boat motor is equipped with its own engine water cooling system, allowing you to fish all day without overheating. Features 360 degree steering rotation for reverse without gear shifting. Twist grip throttle handle and engine stop button for improving response and saving time..
- [Durability]Vertically installed engine design can improve power, performance, Superior outboard anti corrosion system and anodes for increased durability. Durable cast alum....
Check Stock