Zouzmin MGIVR2016-4 MGIVL2016-4 Lathe Internal Grooving Tools Boring Bars for MGMN400 indexable Carbide Grooving Inserts. (MGIVR2016-4)

  • About holders:made of High-Quality Alloy Steel 40CR, Using Free Forging Process, with Higher Mechanical Properties. Prompt Work Efficiency..
  • Moderate toughness and rigidity, impact resistance, good seismic performance..
Check Stock

uxcell 3/32\ Ball End Hex Key Wrench, L Shaped Long Arm 40Cr Repairing Tool, SAE 2 Pcs

  • [Size] - 3/32-inch ball end tip, 4.57" (116mm) total length..
  • [Durable Construction] - Heat treated 40cr Steel drop forged body provides hardness, high torque and toughness. With chrome Plating and sandblasting finish for anti-rust and wear-resistant..
  • [Ball End Tip] - allow up to a 25-degree angle of entry, making it perfect for confined spaces..
  • [Long Arm / Short Arm] - offers extended range on one end and extra leverage on the other..
  • [Widely Use] - To remove and install socket cap screws found in towel bar, door handle, assembling furniture, equipment, and more..
Check Stock

uxcell 1/16\ Ball End Hex Key Wrench, L Shaped Long Arm 40Cr Repairing Tool, SAE 5 Pcs

  • [Size] - 1/16-inch ball end tip, 3.82" (97mm) total length..
  • [Durable Construction] - Heat treated 40cr Steel drop forged body provides hardness, high torque and toughness. With chrome Plating and sandblasting finish for anti-rust and wear-resistant..
  • [Ball End Tip] - allow up to a 25-degree angle of entry, making it perfect for confined spaces..
  • [Long Arm / Short Arm] - offers extended range on one end and extra leverage on the other..
  • [Widely Use] - To remove and install socket cap screws found in towel bar, door handle, assembling furniture, equipment, and more..
Check Stock

MAXPOWER 15-inch Breaker Bar 1/2 drive and 3/8 drive Flex Handle

  • 1/2-inch drive head delivers up to 512N.m(378lb.ft) of torque. Suitable for heavy-duty works. It is NOT recommended to use a force-adding bar.
  • 3/8-inch drive head delivers up to 202N.m(149lb.ft) of torque. Suitable for light-duty and precision works.
  • Made of forged and hardened Cr-V steel. Half inch drive breaker bar 15 inch dual drive 1/2 and 3/8.
  • 360 degree Flexible Cr-Mo drive head reach into tight spaces. Spring-Loaded ball bearing to secure loaded sockets.
  • Features a Non-slip ergonomic grip and polished chrome plated finish that will protect and look great for years.
Check Stock

12mm Universal Joint, 40cr Steel 12 × 23 × 52mm Universal Joint U-Joint Shaft Joint Motor Connector

  • ★★★★★ 【BRAND NEW】 100% brand new and high quality..
  • ★★★★★ 【HIGH QUALITY】 The U-Joint motor connector made of high quality 40cr steel, it is durable and has long service life..
  • ★★★★★ 【SPECIFICATION】 Material: 40cr steel, Nominal Torque: 26N.m, Allowed Torque: 14N.M, Hole Diameter: 12mm / 0.47in, Length: 52mm / 2.05in, Outer Diameter: 23mm / 0.91in..
  • ★★★★★ 【EXCELLENT DESIGN】 It consists of a pair of hinges located close together, connected by a cross shaft..
  • ★★★★★ 【APPLICATION】 This joint or coupling connects rigid rods whose axes are inclined to each other, It is commonly used in shafts that transmit rotary motion..
Check Stock

ASZLBYM S06K/S07K/S08K/S10K/S12M-SCLCR06 Lathe Indexable Internal Boring Bar Set Lathe Turning Tools Holder Set with CCMT21.51/CCMT060204 Carbide Indexable Boring Turning Inserts + 5pcs T8 Wrench

  • ♥PACKAGE INCLUDES : 5pcs lathe turning tools (S12M-SCLCR06 + S10K-SCLCR06 + S08K-SCLCR06 + S07K-SCLCR06 + S06K-SCLCR06 )+ 5PCS CCMT21.51( = ISO CCMT060204 ) carbide inserts + 5PCS T8 wrench , Comes with individual package, packed in Plastic box with Size mark on the box..
  • ♥5PCS BORING BAR : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining..
  • ♥Lead cutting angle: 95 Degree, cutting direction: right hand, turning insert: CCMT21.51( = ISO CCMT060204 ), clear mark on the wrench, easy to identify bar holder..
  • ♥ 5PCS CCMT21.51 INDEXABLE INSERTS : inserts are made of carbide and the coating material is Multilayer ,the Inserts can be used for finishing or semi-finishing stainless steel and cast iron..
  • ♥ADVANTAGE : the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability .If you need more CCMT21.51/CCMT060204,you can search for ASIN: B09495PCR6.
Check Stock

Cadence CR7 Spinning Rod Fishing Rod with 40 Ton Carbon,Fuji Reel Seat,Durable Stainless Steel Guides with SiC Inserts,Full Assortment of Lengths Actions for Spinning Reels

  • What Makes The CR7: The Cadence CR7 is built from 40-ton graphite and features stainless steel guides with SiC inserts, a Fuji reel seat and premium....
  • Premium Materials: The CR7 series of rods are made from materials that bring strength and sensitivity without weight. Made of 40 ton carbon, SiC....
  • A Spinning Rod For All: Premium materials and its availability in many configurations, lengths and actions make the CR7 a great spinning rod – ideal....
  • Give The Gift Of Fishing: With every Cadence purchase, we promise to put youth combos in the hands of our next generation through one of our charity....
  • Performance For Less: Cadence products offer high-performance premium features at an unbeatable value. Fishing with quality, dependable gear should....
Check Stock

Cadence CR7 Spinning Rod Fishing Rod with 40 Ton Carbon,Fuji Reel Seat,Durable Stainless Steel Guides with SiC Inserts,Full Assortment of Lengths Actions for Spinning Reels

  • What Makes The CR7: The Cadence CR7 is built from 40-ton graphite and features stainless steel guides with SiC inserts, a Fuji reel seat and premium....
  • Premium Materials: The CR7 series of rods are made from materials that bring strength and sensitivity without weight. Made of 40 ton carbon, SiC....
  • A Spinning Rod For All: Premium materials and its availability in many configurations, lengths and actions make the CR7 a great spinning rod – ideal....
  • Give The Gift Of Fishing: With every Cadence purchase, we promise to put youth combos in the hands of our next generation through one of our charity....
  • Performance For Less: Cadence products offer high-performance premium features at an unbeatable value. Fishing with quality, dependable gear should....
Check Stock

Outivity 8\ Cutting Pliers Wire Cutter Steel Cable Cuts Copper Wire, Rope Spring Wire Multi-Function Hand Tool For Electricians,Homes

  • 【WIRE CUTTER】The cutter is a shop quality cutter designed specifically for use on steel wire up to 5/32". Precision & sharp cutting jaws and high quality springs for a clean and effortless cut on every steel wire without fraying or smashing the ends..
  • 【ULTRA-DURABLE CR-V STEEL】Made from ultra-durable CR-V steel bar stock, twice the strength of conmon carbon steel! SAY NO TO CHEAP & WEAK CABLE CUTTERS!Why settle for inferior metal when you can have strong CR-V steel cable cutter with our guaranteed satisfaction?.
  • 【ANODIZED COAT FOR DURABILITY】Type III hard coat anodized in a non-reflective black mil-spec finish to provide durability. All edges have been deburred to protect the user..
  • 【WIRE LATCH & NON-SLIP HANDLE】Wire latch holds handles together when not in use. Non-slip handle can be hold comfortably and firmly even when your hands are sweaty..
  • 【TESTED DURABILITY & GUARANTEED SATISFACTION】Our cable cutters have been tested by 500 cutting off the 1/8'' 7x19 assemble coated steel security cable, and they still work very well. All our cable cutters carry a 100% satisfaction guaranteed against defects in original materials and workmanship. If your cable cutter shows evidence of such defects, we will make every accommodation to replace ....
Check Stock

Ewigkeit 24V 40W Heater Cartridge 620 Ceramic Hotend for 3D Printer Prusa Mendel (Pack of 5pcs)

  • 24v cartridge Heater is made of 304 stainless steel material,Diameter: 6mm.
  • Voltage: 24v, Power: 40w, Conveniently pre-wired with 1 meter long high temperature resistant wire.
  • Easy installation, wide temperature range, good stability, high reliability provide a high corrosion prevention.
  • Heating cartridges work with Creality CR-10S Pro,CR-X,Ender 3, Ender 3X, Ender-3 Pro 3d printer,Anet E10 etc.
  • 5pcs of 24V 40W 620 ceramic cartridge heater for 3D printer hotend.
Check Stock

VeYocilk Lathe Threading Carbide Inserts:10 Pcs 11IR A60 1/4 Carbide Inserts for Internal Threading Holders CNC Cutting CNC Turning Tool

  • High Efficiency: This turning tool holders kit for semi-finishing and finishing operations, can reduce the tool grinding cost and improve the cutting efficiency..
  • High Performance: Made of carbide and the coating material is TIN, it can be used for processing steel, the inserts has high hardness, low friction coefficient, good wear resistance and strong impact resistance..
  • Threading Boring Bars: The material of the boring bar is 40Cr steel, widely use, tightly impacted bolt, simple structure, often used for small hole machining..
  • Package Includes: 1PC SNR0008K11 + 1PC SNR0010K11 + 1PC SNR0012M11 turning tools + 3PCS 11IR A60 turning inserts + 3PCS T8 wrench..
  • Best Service: The carbide inserts and turning tools holder are packed in plastic containers, which is safe and easy to store. Any more question about this item, please feel free to email us..
Check Stock

Ethel M Chocolates 8 Piece Premium Dark Chocolate Lemon Satin Crème Bars - Box Set of 8 Individually Wrapped Rich Dark Chocolate Candy Bar With Lemon Crème Centers, 43.4 grams each

  • PREMIUM DARK CHOCOLATE LEMON SATIN CRÈME BARS Ethel M Chocolates Bar Set of 8 individually wrapped chocolate bar with a net weight of 43.4 grams each. Deliciously rich dark chocolate and fresh lemon puree satin creme centers..
  • OUR BEST-SELLING LEMON SATIN CRÈMES CHOCOLATES now available in new chocolate bar set. Each bar of Lemon Satin Crème Dark Chocolate piece combines our decadent dark chocolate bar with a tart lemon cream filling finish..
  • EXCELLENT GIFT OR SHARE WITH FAMILY AND FRIENDS Order a box of 8 Premium Lemon Satin Creme Chocolate Bar Set to share with family and friends. It is the perfect gift or souvenir, a great snack on the go. Add it to your lunchbox or Christmas stocking.
  • FINE CRAFTED SMALL BATCH TRADITIONAL CHOCOLATE RECIPES from Ethel M herself. Dark Chocolate Lemon Satin Crème Bars is one of our most popular specialty premium chocolates. Certified 100% Kosher dairy artisan luxury candy delivered in every box.
  • CREATED USING ONLY THE FINEST INGREDIENTS. Each Premium Dark Chocolate Lemon Satin Crème Bars is made with decadent dark chocolate, fresh cream and lemon puree mixed in our solar powered kitchen. No preservatives added..
Check Stock

WINSINN 40mm RGB Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans LED Colorful 4010 Hydraulic Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of Pcs)

  • ✔️WINSINN 40mm RGB fan which micro size and lightweight design, fast and stable cooling, colorful when it works, bringing you unparalleled experience. So many 3D Printer and DIY enthusiasts are full of praise for it, and it will also be your best choice. The working voltage is 24V, which perfectly compatible a various 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place..
  • ✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.05A, Power: 1.2W, Speed: 5000PRM, Air Pressure: 2.31mmH₂O, Airflow: 5.56CFM, Noise: 22.6dBA.
  • ✔️WINSINN 40mm RGB fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️Packing List: 4 x 40mm RGB Fan 24v, Connector & Line length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
Check Stock