Categories

Best 40mm Nozzle

JIADING Professional 1600W Hot Air Gun PVC Heat Gun Hand Held Plastic Welder heating gun

  • Industry standard and reliable ,Adjustable hot air from 100f-1290f / 40 °C to 700 °C ,Long lifetime ,Heating tube protection for more security.
  • Accessories:Wide slot nozzle 20 mm,Wide slot nozzle 40 mm,Silicone pressure roller 40 mm ,heating element,.
  • One year warranty (not include heat element)..
  • Operation Notice:Knob the temperature to zero point after use,cold airing a few minutes to cool down completely, then turn the power off.This will....
Check Stock

Twotrees J-Head V6 Hot End Full Kit 1.75mm 12V RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • 【1】Applicability & compatibility: compatible with all 1.75mm V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall..
  • 【2】Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking ..
  • 【3】Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly ..
  • 【4】Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm ..
  • 【5】Package include: all metal V6 hotend 12v / 40w / 1.75mm / 0.4mm extruder full kit (V6 printhead + fan + fan cover + PTFE tube + pipe fitting), 1 pieces brass extrusion nozzles (1×0.4mm ) and a v6 heating block, a 2-part Teflon tube in the nozzle neck made of stainless steel..
Check Stock

Ewigkeit MK8 Hotend Ender 3 and Pro Assembled Extruder with Aluminum Heating Block 0.4mm Nozzle(24V 40W)

  • Ender 3 hot end with 100% original and high quality accessories for Creality 3D printer.
  • Ender3 pro Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heater cartridge is 24V 40W.
  • Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament.
Check Stock

Tool Daily Short Pressure Washer Gun, High Replacement, M22 Thread, with 5 Nozzle Tips, 4000 PSI

  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★Pressure washer gun kit includes: 1-piece Pressure Washer Gun, 1-piece brass coupler, 1-piece Red Nozzle (0 Degree), 1-piece Yellow Nozzle (15 Degree), 1-piece Green Nozzle (25 Degree), 1-piece White Nozzle (40 Degree), 1-piece Brass soap nozzle tip (65 Degree)..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★ATTENTION: NOT FIT GardenHose or WaterHose. High replacement pressure washer guns works with electric or gas pressure washer..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★Pressure washer wand has M22 THREAD and 14 MM INNER CONNECTOR FITTING. If hose has M22 14mm fitting with 14mm inside diameter, please connect to hose directly. If hose has M22 15mm fitting with 15mm inside diameter, please connect the brass coupler to gun and hose..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ★1/4’’ standard quick connector. Connects any accessories with 1/4’’ plug to the gun. Such as nozzles tips, pivoting coupler, foam cannon, extension wand, surface cleaner, undercarriage cleaner, water broom. Safety trigger lock to prevent unintended operation..
  • ★ATTENTION: Not Fit GardenHose, WaterHose or YourFaucet Directly ....
Check Stock

110V 1600W Professional PVC Roofing Welding Tools Heat Gun Kit Plastic Welder Hot Air Weld Gun with Roofing Seam Rollers Seam Tester Probe Weld Nozzle  (Hot gun)

  • 1pcs x Seam tester probe, plastic handle.
  • 1pcs x 10" (250mm) Heavy duty roofing scissors.
  • 1pcs x 5mm Round weld nozzle 1pcs x 5mm Round speed weld nozzle.
  • [Warranty]: One year warranty, not include the heat element..
Check Stock

Sunhokey Extruder Assembled MK8 Hot End Kit for CR10 with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle(12V 40W)

  • High-quality 3D Printer accessories for Creality CR-10 CR-10S S4 S5..
  • Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle..
  • MK8 Extruder Hot End Kit, the white wire is temperature thermistor, the red wire is heating tube 12V 40W..
  • Tip of the nozzle, aluminum heating block, throat pipe ..
Check Stock

Wangdd22 E3D V6 Hot End Full Kit 1.75mm 12V Bowden/RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall.
  • Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking.
  • Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality....
  • Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm.
  • Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass....
Check Stock

WINSINN 40mm RGB Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans LED Colorful 4010 Hydraulic Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of Pcs)

  • ✔️WINSINN 40mm RGB fan which micro size and lightweight design, fast and stable cooling, colorful when it works, bringing you unparalleled experience. So many 3D Printer and DIY enthusiasts are full of praise for it, and it will also be your best choice. The working voltage is 24V, which perfectly compatible a various 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place..
  • ✔️High quality Hydraulic Bearings, 2-years Warranty. Balance price and performance, suitable for daily use, life: 35,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.05A, Power: 1.2W, Speed: 5000PRM, Air Pressure: 2.31mmH₂O, Airflow: 5.56CFM, Noise: 22.6dBA.
  • ✔️WINSINN 40mm RGB fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️Packing List: 4 x 40mm RGB Fan 24v, Connector & Line length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
Check Stock

M MINGLE Replacement Pressure Washer Gun with Extension Wand, M22 15mm or M22 14mm Fitting, 5 Nozzle Tips, 40 Inch, 4000 PSI

  • ...e connect the brass coupler between gun and hose..
  • Change the length of pressure washer gun based on your application. Easy to change pressure washer long gun to short gun. Three Length:40 inch, 25 inch, 8.8 inch. Replacement pressure washer trigger gun fits gas and electric pressure washer with M22 fitting..
  • 5 Spray Nozzle Tips: They have different spray angle (0, 15, 25, 40, 65 degree). Choose different nozzle according to your needs. Such as watering flowers and plants, washing car. Max pressure is up to 4000 PSI. And a nozzle holder is provided in the package..
  • Universal 1/4’’ quick connect for any accessory with 1/4’’ plug. Such as nozzles tips, pivoting coupler, foam cannon, water broom, undercarriage cleaner, surface cleaner.Comfortable handle design for easy operation. Trigger lock design for avoiding mishandling..
Check Stock

CHPOWER CR-10 hotend Assembly MK8 Extruder Original Replacement for CR10/ CR-10S/ CR-10S400/ CR-10S500-12V 40W

  • This cr-10 hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • 100% original and high quality 3D Printer accessories for CR10/ CR10S/ CR10S4/ CR10S5.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, black wire is heating tube 12V 40W.
  • Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon).
  • CHPOWER is a TRUSTED VENDOR, we provide 12-month manufacturer service on all parts. Buy with confidence..
Check Stock

Creality Original 3D Printer Extruder Assembled MK8 Hot End Sprinkler Kit for Ender 3 / Ender 3 Pro with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle

  • ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT..
  • 5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT..
  • ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
  • MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W.
  • TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).
Check Stock

MK8 Extruder Hotend 3D Printer Assembled kit for CR-10/CR-10S/CR-S with Aluminum Heating Block 1.75mm, 0.4mm Nozzle

  • 100% original and high quality 3D Printer accessories for Creality CR10/ CR10S/ CR10S4/ CR10S5.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.Perfect replacement accessories/parts for Creality CR-10 CR-10S S4 S5 3D Printer.
  • This CR-10 hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament.
  • With nine(9) cooling fins on the heatsink.No blockage,no leakage,fast heat dissipation, better printing effect..
Check Stock

Weldy 1600W Professional Hot Air Equipment Hot Blast Torch Overlap Air Welding Gun Welder Pistol Tool Hot Air Gun 120 Voltage and flat nozzle

  • WELDY energy HT1600 is a compact and robust hot air hand tool for an endless range of professional applications. This hot-air-tool convinces with its....
  • Accessories:Wide slot nozzle 20 mm,Wide slot nozzle 40 mm,Silicone pressure roller 40 mm.
  • (Weldy AG Switzerland) All Weldy products are manufactured according to Swiss technology and engineering and its proximity to the key markets is a....
  • One year warranty (not include heat element). Operation Notice:Knob the temperature to zero point after use,cold airing a few minutes to cool down....
  • Industry standard and reliable ,Adjustable hot air from 100f-1290f / 40 °C to 700 °C ,Long lifetime ,Heating tube protection for more security.
Check Stock