Categories

Best 45alternator Bracket

ICT Billet BBC Billet Alternator Bracket Adjustable LWP Low Mount Big Block Chevy Long Kit 551496

  • Compatible with Chevy alternators with 6.56 inch bolt pattern.
  • Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum.
  • Includes all hardware to attach bracket to long water pump.
  • Will fit with serpentine and V-belt pulleys.
Check Stock

Tendodo Black L Wall Bracket AH61-03883A and R Wall Bracket AH61-03884A for Samsung HWHM45 HW-HM45 HWHM45C HW-HM45C HWHM55C HW-HM55C Sound bar

  • ❤【Product category】：Replacement Wall mount bracket Kit AH96-03064A.
  • ❤【Compatible models】: Suitable for Samsung HWHM45 Sound bar , HW-HM45 Sound bar , HWHM45C Sound bar , HW-HM45C Sound bar ,HWHM55C Sound bar ,HW-HM55C Sound bar..
  • ❤【Product Introduction】: The mounting bracket is made of high quality and environmentally friendly materials. It is small, lightweight and easy to install.This wall bracket is very suitable for installation in home theaters, offices, living rooms, bedrooms, studios, allowing you to save space as you want..
  • ❤【Package Includes】: 1 set of wall mount bracket accessories (including screws and installation instructions).
  • ❤【After sales service】: 180 Days Service Guarantee，If there is any problem , please let us know and we will solve your problem promptly. We promise 100% friendly customer service..
Check Stock

Eapele Undermount Sink Repair Kit, Sink Brackets for Quick and Easy Installation for Fallen Sink Support

  • ...e-for-all effort for you because this product sets you free for good from having to frequently fix your falling sink. Enjoy your cooking without worrying about your sink..
  • Easy to install --- No need to remove the sink to install this product. All you need is an electric wrench and screws to fix the base of the bracket, and tighten the hexagon threaded rods until the entire bracket is firmly thrust against the edge of the sink. The attached manual gives detailed step-by-step descriptions..
  • Strong steel --- A perfect bracket for undermount single/double bowl sink. Even a double bowl sink fully loaded with water does not swing when supported with this bracket. Surface galvanization makes sure this bracket does not grow rust in the humid kitchen conditions and provides prolonged services to you..
  • 45° support range --- The support rod can rotate by 45°, which makes this bracket workable even if the sink is a bit far from the wall. The package includes four long support rods and a short one that can be installed in any possible position at your convenience..
  • After-sales service --- We promise full refund if any craftsmanship defects are found. In the case of damaged missing parts, contact us and we will send you replacements. Note: Please download....
Check Stock

CURT 58300 Vehicle-Side Trailer Wiring Harness Mounting Bracket for 4-Way Flat

  • STANDARD FIT. This trailer wiring mounting bracket is designed to securely mount virtually any industry-standard 4-way flat connector.
  • FLEXIBLE MOUNTING. The bracket features a simply friction fit design to accept a variety of trailer wiring harnesses. It allows you to mount the wiring harness onto your vehicle or trailer hitch, whichever is most convenient.
  • HIGH-STRENGTH. This trailer wiring harness bracket is made from solid steel to provide plenty of strength for a solid mount and to remain fixed in spite of vibrations while towing. The steel body will not crack like plastic alternatives.
  • CORROSION-RESISTANT. To face the weather and elements with ease, this trailer wiring bracket is covered in a black powder coat finish, helping to resist rust for long-lasting strength.
  • EASY TO INSTALL. To install this mounting bracket for vehicle-trailer wiring, you can bolt it directly onto your vehicle using the top screw holes, or you can pair this bracket with the CURT 57204 for a convenient, no-drill, tube clamp mount.
Check Stock

Impact Deluxe Umbrella Mount with Adjustable Shoe -

  • 180 DEGREE TILT and 360 DEGREE SWIVEL - Impact light stand bracket can tilt 180 degrees and swivel 360 degrees, allowing you to aim your flash or....
  • SPACE SAVING MOUNTING OPTIONS - Useful and versatile addition to any photography umbrella lighting kit.
  • this umbrella and flash bracket mount features....
  • MADE OF PREMIUM ALUMINUM ALLOY - This sturdy camera flash bracket is durable and can take a lot of beating, making it a....
  • MULTIPLE ADJUSTMENTS and SUITABILITY - Impact speedlight mount is a good alternative for mounting small light fixtures. It can be installed on any....
  • 1-YEAR WARRANTY - Unlike many flimsy, all-plastic competitors, our umbrella and flash holder is long-lasting and super....
Check Stock

Sloped Ceiling Clothes Rod Bracket Chrome Finish

  • This useful bracket allows the opportunity to make otherwise unusable sloped ceiling space, into an area for hanging clothes! With its multiple....
  • How to Install: 1. Easily attach the bracket to framing member with provided screws. (Installation Recommendation: Brackets are to be placed no more....
  • 6 Angle Adjustment Positions Available (Works up to a 45 Degree Roof Pitch).
  • Rated at 125lbs per bracket (14 gauge steel).
Check Stock

Kolpin Universal Gun/Saw Boot Bracket - 20200,Black

  • Fits Kolpin Gun Boot IV, 4.3, 6.0, Kolpin Stronghold Gun Boot L cases and saw boot only (sold separately).
  • Universal bracket fits most ATV tubular steel racks or UTV frames up to 2 inches diameter (also fits square tubing).
  • Bracket can be adjusted to multiple angle positions between 0° and 45°.
  • Rubber coated ring holds your Gun Boot case securely.
Check Stock

A-Team Performance - 5 1/2 Adjustable Tensioning Rod Heim Joint Alternator Bracket - Compatible with Chevrolet SBC BBC Small Block Big Block Chevy 350 454

  • Fits Big Block Chevy 396 427 and 454 Engines.
  • Mounts on passenger side cylinder head allowing for ample space to run a mechanical or electric water pump. The relocation bracket seen in the images....
  • Don't settle for a cheaply made bracket that will flex during acceleration. Give your engine the strong American Made bracket that it deserves!.
  • Billet Aluminum Big Block Chevy Alternator Bracket CNC Machined in the USA backed by our industry leading lifetime warranty!.
  • Includes all brackets and hardware needed for a quick and easy installation!.
Check Stock

GoDear Design Deluxe Adjustable Sliding Panel Track Blind 45.8"- 86" W x 96" H, Extendable Semi Sheer Blind for Sliding Glass Door, Vertical Blind for Patio Door, Room Divider, Semi Privacy, Cirrus

  • ... be mounted to the wall or ceiling and, moreover, there are 2 control stack options, you can easily slide with a solid metal wand all the way to the right or left..
  • 【INSTALLATION】(1) Inside Mount: Minimum 2.5-inch depth needed.
  • (2) Outside Mount: Minimum 2.25-inches of bracket height required on the top..
Check Stock

Mota Performance A70356 Chrome Alternator Bracket Low Mount Style

  • Designed to accommodate Hooker Headers to the stock power steering, air conditioning and alternator / generators.
Check Stock

GoDear Design Deluxe Adjustable Sliding Panel Window Blind 45.8 - 86 W x Up to 96 H Extendable 4-Rail Track Vertical Blind for Slider Windows and Patio Doors Trimmable Natural Woven Fabric Pecan

  • 【INSTALLATION】GoDear panel track blinds are designed specifically for DIY and easy installation, you can choose different installation methods (wall or ceiling) according to your needs. (1) Inside Mount: Minimum 2.5-inch depth needed.
  • (2) Outside Mount: Minimum 2.25-inches of bracket height required on the top..
Check Stock

Adiyer M8 Screws for Samsung TV Wall Mount 304 Stainless Steel M8 x 45mm TV Mounting Bolts Screws for Samsung TV with 25mm Long Spacers

  • M8 x 45mm screws spacers washers kit fit for Samsung TV wall mount bracket..
  • Tested to fit for Samsung TV model: UN49MU8000, UN65MU8000, UN50NU6900BXZA, QN65Q6FNAFXZA, 2020 samsung 43” QLED Q60T, 2018 Samsung 65″ QLED, UN55KS8000, UN65KS8000, NU7100, NU7200, etc..
  • This M8 x 45mm screws kit fit for most samsung tv mount bracket over 43″, and please check your TV user manual first to choose correct mounting screws..
  • 304 stainless steel Phillips pan head Metric M8 machine screws with 1.25mm threaded pitch and 45mm threaded length.
  • Head Size: 13mm x 6mm/ 0.51″ x 0.23″(D*H).
  • 4x screws M8x45mm, 4x plastic spacers 15mm, 4x plastic spacers 10mm, 4x 2mm thick stainless steel flat washers, 4x 1mm thick stainless steel flat washers.
Check Stock

Kolpin Gun Boot Iv Loop Bracket - 20032 Black

  • all-metal constructed loop bracket provides a secure and safe fit for your Gun Boot IV or Gun Boot 6.0 on your ATV.
  • Loop Bracket can be adjusted to multiple angle positions between 0-degree and 45-degree and the rubber coated ring holds your Gun Boot securely.
  • Compact design of this bracket provides for universal fitment to ATV racks, but also leaves room for your other valuable gear.
Check Stock