Categories

Best 480gb Inland Satas

Inland 1.75mm Blue PETG 3D Printer Filament Dimensional Accuracy +/- 0.03 mm - 1kg Spool 2.2 lbs

  • 1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • Recommended Extrusion/Nozzle Temperature: 230°C - 250°C (440°F - 480°F)/ No heated bed needed/ Vacuumed sealed with desiccant.
  • PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the....
  • Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more....
Check Stock

Inland Premium 512GB PCIe M.2 NVMe SSD+Micro Center Intel Core i5-10600K Desktop Processor LGA1200 125W Bundle with ASUS Prime Z590-P ATX Motherboard

  • Intel Core i5-10600K Desktop Processor. 6 Cores 12 Threads.
  • CPU Support Maximum Memory Capacity 128 GB, DDR4 2666 MHz, No ECC memory, up to 2 memory channel, 41.6 GB/s max memory bandwidth. Built-in Intel UHD....
  • ASUS PRIME Z590-P ATX Motherboard with PCIe 4.0. Intel LGA 1200 socket. Three M.2 slots, 11 DrMOS power stages, HDMI, DisplayPort, SATA 6 Gbps, 2.5 Gb....
  • Enhanced power solution: 10+1 DrMOS power stages, six-layer PCB, 8-pin ProCool connector, alloy chokes and durable capacitors for stable power....
  • Inland Premium 512GB SSD M.2 2280 PCIe NVMe 3.0 x4 3D NAND Internal Solid State Drive, High Speed Read/Write Speed up to 3100MB/s and 1900MB/s, NVMe....
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Black ABS 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Black ABS 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • ABS Filament Specs: Black - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Print Temperature: 240°C - 260°C (464°F - 500°F)/ Print Bed Temperature: 80°C - 110°C (176°F - 230°F).
  • Why INLAND ABS Filament: Designed with the high quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm White ABS 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm White ABS 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • ABS Filament Specs: White - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Print Temperature: 240°C - 260°C (464°F - 500°F)/ Print Bed Temperature: 80°C - 110°C (176°F - 230°F).
  • Why INLAND ABS Filament: Designed with the high quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Blue ABS 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Blue ABS 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • ABS Filament Specs: Blue - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Print Temperature: 240°C - 260°C (464°F - 500°F)/ Print Bed Temperature: 80°C - 110°C (176°F - 230°F).
  • Why INLAND ABS Filament: Designed with the high quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Olive Green PLA PRO (PLA+) 3D Printer Filament Bundle

  • A 3D Printer accessories combo - 1.75mm Olive Green PLA PRO (PLA+) 3D Printer Filament bundle with OctoPrint 3D Printer System Pre-flashed 32GB Micro SD Card.
  • PLA PRO Filament Specs: Olive Green - 1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 205°C - 225°C (401°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA PRO Filament: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
Check Stock

Inland 1.75mm White PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Spool (2.2 lbs)

  • 1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • Recommended Extrusion/Nozzle Temperature: 230°C - 250°C (440°F - 480°F)/ No heated bed needed/ Vacuumed sealed with desiccant.
  • PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the advantages of both PLA and ABS.
  • Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time creating! 100% satisfaction guarantee provided.
Check Stock

Inland 1.75mm Black PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Spool (2.2 lbs)

  • 1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • Recommended Extrusion/Nozzle Temperature: 230°C - 250°C (440°F - 480°F)/ No heated bed needed/ Vacuumed sealed with desiccant.
  • PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the advantages of both PLA and ABS.
  • Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time creating! 100% satisfaction guarantee provided.
Check Stock

INLAND Premium 512GB NVME M.2 SSD+Micro Center Intel Core i5-10600K Desktop Processor Bundle with ASUS Prime B460M-A Micro mATX Motherboard

  • Intel Core i5-10600K Desktop Processor. 6 Cores 12 Threads.
  • CPU Support Maximum Memory Capacity 128 GB, DDR4 2666 MHz, No ECC memory, up to 2 memory channel, 41.6 GB/s max memory bandwidth. Built-in Intel UHD....
  • ASUS Prime B460M-A MB. Built with Intel LGA 1200 Socket, designed to unleash the maximum performance of 10th Gen Intel Core processors. Flexiable....
  • Comprehensive Cooling with VRM heatsink, PCH heatsink, hybrid fan headers and Fan Xpert 2 utility. / 5X Protection III with LANGuard, DRAM overcurrent....
  • Inland Premium 512GB SSD M.2 2280 PCIe NVMe 3.0 x4 3D NAND Internal Solid State Drive, High Speed Read/Write Speed up to 3100MB/s and 1900MB/s, NVMe....
Check Stock

Kingston 480GB A400 SATA 3 2.5 Internal SSD SA400S37/480G - HDD Replacement for Increase Performance

  • Fast start up, loading and file transfers. A400 has a 7 millimeter form factor to fit in a wider array of systems. It’s ideal for slimmer notebooks....
  • More reliable and durable than a hard drive.
  • Multiple capacities with space for applications or a hard drive replacement.
  • Capacity: 480GB, Interface: SATA Rev. 3.0 (6Gb/s) with backwards compatibility to SATA Rev. 2.0. 480GB to 500MB/s Read and 450MB/s Write.
Check Stock

Inland 1.75mm Translucent Blue PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Spool (2.2 lbs)

  • 1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • Recommended Extrusion/Nozzle Temperature: 230°C - 250°C (440°F - 480°F)/ No heated bed needed/ Vacuumed sealed with desiccant.
  • PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the advantages of both PLA and ABS.
  • Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time creating! 100% satisfaction guarantee provided.
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Pink PLA 3D Printer Filament Bundle

  • ...1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA Filament: Designed with the high quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock

OctoPrint 3D Printer Remote Control Webserver System Pre-Flash Card and Inland 1.75mm Silver PLA 3D Printer Filament Bundle

  • ...1 KG / 2.20 lbs per spool - 1.75mm diameter (+/- 0.03mm). Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • Why INLAND PLA Filament: Designed with the high quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to help you spend less time troubleshooting and more time printing. Your filament will arrive dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
  • OctoPrint is a snappy webserver that runs on a Raspberry Pi and lets you remote-control a 3D printer from your computer. Control and monitor your 3D printer from your phone or other web-capable device. Easily stop, start, or pause your 3D prints from anywhere.
  • Compatible with most of the available consumer 3D printers and its powerful plugin system allows extending its functionality in various ways. Setup hardware: Any Raspberry Pi (Pi 3 and up for the best experience), USB power supply, USB cables, webcam feed(optional).
Check Stock