Categories

Best 4mm Copper Tubing

NestEcho Laboratory Vacuum Filtration Pump for USA Market

  • ...ubing to the lab vacuum filtration and then turn the lab filter pump on in order to let the lab vacuum pump work.(the yellow tubing can be connected to the black tubing in order to connect to big size nozzle of laboratory vacuum filtration distillation apparatus).
  • The lab vacuum pump product is made of plastic shell,Copper wire inside part and four Shockproof rubber base etc. The plastic shell can avoid rust.copper wire inside part makes the product more durable.The shockproof rubber base can reduce noise. You can barely hear the noise when the product is working..
Check Stock

Tynulox 3/16 5mm OD 99.9% Copper Tube 0.5mm Wall × 300mm Length × 2Pcs Pure Copper Tubing 110 Copper Seamless Round Tubing for Refrigerator Jewellery and Industry

  • ❀---- Size: 3/16" OD - 5/32" ID (5-4mm), Length: 300mm(12"), Wall Thickness: 0.02"(0.5mm), 2Pcs.
  • ❀---- DIY Decoration: You can cut the copper tube by yourself to choose the desired length..
  • ❀---- Excellent Conductivity: 99.9% copper has good strong heat transfer capability and electrical conductivity. In addition, it isn’t affected by corrosion, temperature and pressure. If you want refrigeration tubing in refrigerators, freezers and air conditioners, it’s a good choice..
  • ❀---- Nice Appearance: The surface of pure copper tubing is smooth with no seam and full of metallic luster. You can use it for DIY handicrafts, jewelry, crafts, etc..
  • ❀---- Multiple Sizes: You can choose diversiform sizes of copper tubings. (OD:1/8” ~1”, Length:300mm). If you have any requirements, please send us Amazon Message..
Check Stock

LabEdit Portable Vacuum Pressure Pump with Tubing and Connectors

  • ...ubing to the lab vacuum filtration and then turn the lab filter pump on in order to let the lab vacuum pump work.(the yellow tubing can be connected to the black tubing in order to connect to big size nozzle of laboratory vacuum filtration distillation apparatus).
  • The lab vacuum pump product is made of plastic shell,Copper wire inside part and four Shockproof rubber base etc. The plastic shell can avoid rust.copper wire inside part makes the product more durable.The shockproof rubber base can reduce noise. You can barely hear the noise when the product is working..
Check Stock

BCZAMD 3D Printer Parts 1 Meter PTFE Tflon Tube for 1.75mm Filament ID 1.9mm OD 4mm Tubing for TL-Feeder Hotend Reprap Rostock Extruder Black

  • PTFE Teflon Tubing: Outside diameter 4mm, inside diameter 2mm.
  • Teflon tubes are made of premium PTFE material, unique....
  • Premium PC4-M6 Fittings:thread M6, inner diameter(blue end) 4mm, suitable for the tube whose outer diameter is 4mm.PC4-M6 fittings are made of copper....
  • Upgraded PC4-01 Fittings:thread PT1/8, inner diameter(black end) 4mm, suitable for the tube whose outer diameter is 4mm,perfect for E3D V6....
  • Easy to install and Quick to fix: Press and hold the blue or black part of the quick fitting and pull out the tube. Provide turn 360°freely and....
  • Compatibility: Fit for all 1.75mm PLA ABS 3D printer securely with no burrs..
Check Stock

QuQuyi Copper Tube 5/32\ OD × 1/8\ ID Seamless Round Copper Metal Tubing (300mm), 4Pcs

  • 【Size】: Inner Diameter: 1/8"(3mm) | Outer Diameter: 5/32" (4mm)| Tube Wall: 1/48"(0.5mm) | Length: 12" (300mm per tube) 4PCS.
  • 【Duarble Material】: Copper Tubing is made of high quality copper material, excellent ductility and electrical conductivity, can adjust the required length of their own processing. The surface is smooth without seam..
  • 【Good Thermal Conductivity】: Used in manufacture of magnetism instruments or meters..
  • 【Wide Range Of Use】: Copper tube is widely used in DIY projects, hobbies, crafts, architectural models, architectural decoration, frame, industry, gardening products, electrical and thermal conductivity, etc..
  • 【Wonderful Plasticity】: Easy to work under hot and cold pressure..
Check Stock

Creality Capricorn Bowden Tubing XS Series 1.2M for 1.75MM Filament, with Upgraded PC4-M6 & PC4-M10 Pneumatic Fittings & Hot Bed Die Springs, PTFE Teflon Bowden Tube for Ender 3V2/3/3 Pro 3D Printer

  • ...ich is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. it stands the highest standards for PTFE tubing in all of 3D printing..
  • PC4-M6 And PC4-M10 FittingsPC4-M6 fittings thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable. PC4-M10 fittings: thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion..
  • 4 Pcs Upgraded Bed-Level SpringsThe die springs are stiffer than ordinary spring, making bed levelling easier and stronger than the stock ones, and help your 3D printer much more stable while printing. If you have any questions and concern, please feel free to contact with us. Our after-sales technical team will provide you with detailed solutions within 24 hours..
Check Stock

LUTER 3 Pieces Teflon Tube PTFE White Tubing 1m + 3 Pieces Quick Fitting for PC4-M6 + 3 Pieces Straight Pneumatic Fitting Push for PC4-M10 to Connect for 3D Printer 1.75mm Filament

  • PTFE Blue Tubing - the blue color teflon tube outside diameter 4mm, inside diameter 2mm, density 2.15-2.20g/cm3.
  • PC4-M6 fittings - thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm.
  • PC4-M10 fittings - thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm.
  • Premium Material - the teflon tube made of durable PTFE (Poly Tetra Fluoro Ethylene) material, PC4-M6 Fittings is made of Copper.
  • Attention - small 3D printer accessories, please keep away from children.
Check Stock

WIREWORLD Equinox 8 Speaker Cable Pair/Standard/Banana to Banana - 2.5 Meters

  • Premium pure copper 14-Gauge speaker wire with 245 fine strands per conductor. Compared to copper-clad-aluminum wire, pure copper wire has 30% lower....
  • Each cable is terminated using gold-plated 4mm banana plugs on both ends. The all-metal banana plugs are purpose-made for high current and low loss....
  • Ultra-slim connector design eliminates needless bulk for a clean and uncluttered installation. The connector holds firmly once fully inserted and has....
  • Hand-assembled using soldered joints and heat shrink tubing. This construction method results in the best possible audio signal transfer and is also....
  • Dual-layer jacket design with a firm inner jacket for wire stability and a supple outer jacket for excellent protection against abrasion while....
Check Stock

Creality Capricorn Bowden Tubing Upgrade 1M Capricorn PTFE Teflon Tube for 1.75mm Filament of Ender 3/3 Pro/5 CR-10 4pcs Hot Bed Mold Springs 2 Pair Pneumatic Coupler 1 Clipper 5pcs 0.4mm Nozzles

  • 100% Original Capricorn XS Series tubing..
  • Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead....
  • PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and plastic, sturdy and....
  • One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
  • Any questions please feel free to contact us at any time. We will reply to you within 24 hours and provide technical support for you..
Check Stock

Capricorn Bowden PTFE Tubing 1M XS Series 1.75MM Filament with 2X PC4-M6 & 2X PC4-M10 Pneumatic Fittings & Tube Cutter for Creality Ender 3 V2/ Ender 3/ Ender 3 Pro/Ender 5/ CR-10/10S 3D Printer

  • 100% Original Capricorn XS Series tubing..
  • Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate..
  • PC4-M6 Couplers: thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of premium copper and plastic, sturdy and durable. PC4-M10 Couplers: thread M10/6mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm, made of high qulity stainless steel and plastic, high hardness, antioxidtion, anti corrosion. The extruder fittings are PC4-M6 and the hotend fittings are PC4-M10..
  • One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting..
  • Any questions please feel free to contact us at any time. We will reply to you within 24 hours and provide technical support for you..
Check Stock

Cole-Parmer-3121270 Compression Ferrule and Nut Assembly, for 1/4\ OD, Brass

  • This Joywayus compression fitting is made of brass..
  • Connects to 4mm copper,brass,aluminum,or plastic tubing..
  • Brass for corrosion resistance,ductility at high temperatures,and low magnetic permeability..
Check Stock

HVAC Flaring and Swaging Tool Kit Flares OD Soft Refrigeration Copper Tubin

  • HVAC Flaring and Swaging Tool Kit Flares OD Soft Refrigeration Copper Tubing.
  • This is a heavy duty steel Flaring and Swaging Tool Kit for flaring and Swaging copper tubing.With this Flaring and Swaging Tool Kit you can flare or....
  • Copper tubing flaring tool + copper tubing swaging kit in a combination tubing flaring./swaging kit to fit all your needs.
  • For 1/8",3/16",1/4",5/16",3/8",7/16",1/2",5/8"& 3/4" O.D. Tubing. 5 Swage Adapters For: 3-in-1 (3/16",1/4",3/8") ,5/16",1/2",5/8"& 3/4" O.D.Tubing.....
  • Swivel type Swaging adapters and flaring cone are hardened steel chrome finished for easy operation Self centering, slip-on forged steel yoke Blow....
Check Stock

uxcell Copper Tube 2mm 3mm 4mm 5mm 6mm 7mm OD x 0.5mm Wall Thickness 300mm Length Seamless Round Pipe Tubing Pack of 6

  • [Product Parameter] - 2mm 3mm 4mm 5mm 6mm 7mm OD.
  • [Durable Copper Tube] - Made of copper material, which is lightweight, with high strength, good thermal conductivity, corrosion resistance, high-temperature resistance, ductility, and weather resistance. Can be used on various occasions..
  • [Application] - Commonly used in machinery, DIY projects, hobbies, crafts, building models, building decorations, frames, industrial, gardening products, and so on..
  • [Weldable & Cuttable] - Copper tubing can be welded and processed to different lengths according to your needs by using the right equipment..
  • [Warm Note] - The surface of the copper tube is easy to be oxidized and it will have a little oxidation (not rustiness), but it does not affect the use. If you need a beautiful appearance, such as crafts, it is recommended to use fine sandpaper grinding..
Check Stock