Categories

Best 4mm Nozzle

Orbit 10106H Misting Nozzle

  • * Material: A Filter on your mist system, features a sturdy brass body with stainless steel orifice, not rust, durable. Minimal water use of 1/2 gallon of water per hour per nozzle..
  • * Thread size: 4mm(diameter)*5mm(length) , Total length 24.8mm. Note : this is a high Pressure mist nozzle, the Operation Pressure is 20-80kg/cm, Flow Rate 80-145ml/min..
  • * Wide Appliacations: It can be usually used for a wide range of occasions such as garden, balcony, villa garden sprinkler irrigation.
  • Perfect for landscaping, cooling, air humidification, spray disinfection, epidemic prevention, deodorizing air purification..
  • * There is a stainless steel mesh in the nozzle with good filter efficiency, the water will be There is a stainless steel mesh in the nozzle with good filter efficiency, the water will be sprayed in network, good for filtering systems ..
  • * Item contains 10 pcs Brass Misting Nozzles, Soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage..
Check Stock

SKD RV Tech 10pcs Brass Misting Nozzles, 1/4 Inch Mister Nozzles Thread Misting Nozzle Tees for Outdoor Misting Cooling System Replacment.Misting Parts & Accessories

  • It only uses one half gallon per hour per nozzle..
  • Thread size: 4mm(diameter)*5mm(length) , 3/16" pitch. Note : this is a high Pressure mist nozzle , the Pressure is 20-80kg/cm.
  • features a sturdy brass body with stainless steel orifice.
  • Soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage.
Check Stock

WINTOOLS 1.45 Gallon Air Hopper Spray Gun Paint Texture Tool Drywall Wall Painting Sprayer w/3 Nozzle

  • Material: aluminium alloy(Spray gun) ＆plastic(Cup).
  • Color: Dark red(Spray gun) ＆white(Cup).
  • Recommended pressure: 4-6 CFM/50-70 PSI, Cup size: 1.45 gallon.
  • Sizes of nozzles: Small nozzle: 4mm (medium viscosity materials) Meddle nozzle: 6mm (medium).
Check Stock

Sandblaster Air Sand Blasting Gun Kit, Spray Gun Air Sand Blaster Grit Blasting, Air Siphon Feed Blast Gun w/Metal/Ceramic Nozzles + Sand Suction Pipe, Rust Paint Sandblaster Remove Cleaning Tool

  • High quality and fine made parts assures uninterrupted flow of blasting material, Cast aluminum pistol handle ensures comfortable grip, Durable and Practical, Long Time service life.
  • 6 Different Nozzle Size- Ceramic Nozzle: 4mm 5mm 6mm 7mm, Metal Nozzle: 5mm, Black Ungsten Steel Nozzle: 6mm, Can meet your different needs.
  • Designed for efficient sandblasting,liquid and air cleaning of parts and surfaces.
  • Can be used for sand glass, sandblasting, surface polishing processing, machinery parts, such as surface cleaning, rust removal and glass, aluminum alloy and other decorative surface sandblasting, marble engraving.
  • Ideal to clean metal rims on car wheels, remove rust from fences, refurbish external brickwork etc.
Check Stock

Micro Swiss All Metal Hotend Kit for Creality CR-10 / CR10 / CR10S / Ender 2 / Ender 3 Ender 5 Printers .4mm

  • Fits: Creality CR-10 / CR-10S / CR-10-S5 / CR-10 MINI / CR-10-S4 / Ender 2 / Ender 3 / Ender 3 / TronXY X5S.
  • Kit Includes: Aluminum Cooling Block, Grade 5 Titanium Heat Break, Aluminum Heater Block, Brass Plated Wear Resistant MK8 .4mm Nozzle, Silicone Sock.
  • This is a Drop in All Metal Conversion Kit for CR-10 printers.
Check Stock

3D Printer Part, 5PC 0.4mm Brass Extruder Nozzle Print Head+ 5PC 30mm Length Teflon Throat Tube+ 5PC Heater Blocks Hotend for Anet A8/A6 3D Printer

  • Parameter and Specifications: Input diameter 2.00mm, Output diameter 0.4 mm, out thread M6, Thread length 4mm.
  • a set of 25pcs printer nozzles，wrench and 5 pcs stainless steel needles. And the outer surface is marked with a size, So you can easily identify the specifications of the nozzle..
  • Applicability and Compatibility: Our nozzles fit for 3D Printer Makerbot CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original..
  • Precision Process: Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
  • Precise Design: Cutting with the diamond knife, make the contact surface more flat, so it reduces the risk of printhead leakage greatly and avoid nozzles clogging..
  • Due to all of above, not only reduce the resistance, avoid filament getting stuck on nozzle, but also effectively guarantee the service life of the nozzle, make out of filament more smoother..
Check Stock

Nozzles Irrigation System Misting Automatic Watering Garden Hose Spray head with 4/7'' PE Hose and Cconnector 10m (10)

  • 4/7 capillary tube 10 meters (tube size is about 4mm inner diameter 4mm outer diameter 7mm), 1 8mm quick connector, quarter..
  • 1 nipple connector, 9 single gray fog +47 flat tees, 9 single gray fog +47 single hook, 10 cable ties..
  • The spray nozzle has good atomization effect, and can be adjusted to a thin water line. The spray in the air will become a small rain effect, which is convenient and practical..
  • It is suitable for family watering flowers, cooling the balcony and courtyard, and irrigation in the greenhouse..
  • Easy installation, water saving, labor saving, time saving and more practical! (Before taking over, scalding with boiling water for about 10 seconds. This will make connection easier).
Check Stock

BIGTREETECH Direct Metal Hotend with MK8 Nozzle CR10 Extruder Heatsink for CR10 Ender 3 Upgraded 3D Printer Parts

  • ⭐【Item Name】: All Metal MK8 Hotend CR10 Extruder Conversion Kit compatible with Creality Printers..
  • ⭐【CR10 Heatsink Hotend】: Strong and durable, imported aluminum quality, efficient heat transfer,Compatible with CR10S, Ender 3 Series and BIQU....
  • ⭐【Package Including】: 2 * 4mm PTFE Tube.
  • Compatible with 100K NTC 3950 thermistors.
  • Uses MK8 Nozzle and 6 * 20mm Heater Cartridge..
  • ⭐【Warm Notice】When replace the honted, should preheat the honted, setting the nozzle to 234°..
  • ⭐【Technical Support】If you have any question, please feel free to QA or tell us through Amazon, we will get back to you within 24h..
Check Stock

Anytec 10Pcs Metal Cleaning Brush Set for Weed Pipe Clean Glass Hookah Smoking Brush Baby Feeding Bottle Brush

  • The brush head is nylon bristles. The well-made nylon bristles prevent scratching the items, and is also not easy to pluck.
  • Various sizes to meet all kinds of pipeline cleaning requirements: one set included 10 diameters. 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 12mm, 16mm 20mm, 24mm.
  • PREFECT FOR CLEAN THE DIFFICULT PARTS OF APPLIANCES. Such like coffee pot nozzle and teapot nozzle, nipple baby bottle tube, oil pourer, drinks....
  • Not too hard and not too soft, efficient cleaning will not damage your equipment, just like your toothbrush protect your teeth.
  • Package: 1 set of 10 brushes with varying diameters on a detachable key ring.
Check Stock

Micro Swiss Direct Drive Extruder for Creality CR-10 / Ender 3 Printers

  • Fits: CR-10 / CR-10-S5 / CR-10-S4 / CR-10S / CR-10 MINI / CR-20 / CR-20 Pro / Ender 2 / Ender 3 / Ender 3 Pro.
Check Stock

Kraft Tool PC301 Super-Pro Texture Gun and Hopper

  • Nozzle Size: Three different size nozzles: 4mm.
  • Application: It can be used to paint cell, wall and so on..
  • Material: Aluminium alloy(Spray gun) & plastic(Cup).
Check Stock

Pankero5v Aquarium Shell Bubbler Decor, Fish Tank Bubble Maker Shell Bubbling Ornament, Creative Novelty Aquarium Fish Tank Supplies Scenery Landscape

  • How to use : There is an air stone under the shell, air stone nozzle :4mm , connect with 4mm tube ,open air pump, the shell will create a lot of bubbles. (air pump and air tube not included).
  • Realistic : The shell bubbler mimic tropical underwater sea clams, great scenery for aquarium tank..
  • Application: Perfect for mini landscape, fish tank decor or addition to a larger aquarium..
  • Eco Material : The bubble maker is Super detailed and realistic, eco resin, vivid and eye catching brightly painted and vibrant colors..
  • Size : The mini shell bubble maker is about 6 x 5 x 4 cm ,weight about :80g, increase oxygen ,create water circle , change your fish tank into a beautiful waterscape..
Check Stock

TRESDA Paint Sprayer, 1200ml High Power HVLP Spray Paint Gun, with Built-in Storage, 3 Copper Nozzles & 3 Patterns, Spray Gun for House Painting, Car, Fence, Furniture, Cabinet

  • 3 in 1: Tresda spray gun is equipped with 3 sizes of copper nozzles (1.0mm/ 1.8mm/ 2.5mm)，1.0mm nozzle is good for clear coats with super fine finishes.
  • 2.5mm nozzle can be used for Gel Coats and Resins. The electric paint spray gun can adjust 3 different spray patterns: horizontal, vertical, and circular which greatly improved functionality, suitable for any spray paint project..
  • Adjustable Spray Length& Volume: The paint spray length and volume can be controlled by rotating the adjusting knob to meet your various paint needs, suitable for edges, corners and broad interior surfaces of various work and DIY projects..
  • Mini Features: The features like LED light and shoulder strap are simple but utilitarian. The hidden elements of 2 nozzle storage boxes and wrench storage slit demonstrate the pragmatism that less is more. You do not need to worry about lose accessories. The main body comes with unique hollow-carved heat sink which is greatly improve the heat dissipation efficiency..
  • Unique Design For Better Experience: Multiple cooling air outlets can efficiently improve the heat dissipation to avoid the problem of injury caused by overheating of the machine during use. Detachable design, make it easier to use and ....
Check Stock