Categories

Best 5 8 Hex Bolts

Wolf Tooth Components Set of 5 Chainring Bolts+Nuts for Single-Ring 1X Drivetrains

  • Precision Machined Chainring Bolts for Single-Ring Drivetrains.
  • These single chainring optimized bolts have a 4 mm hex socket on the bolt and a 6 mm hex socket on the nut so no spanner is needed..
  • These are 6 mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs..
  • 5 bolts and nuts weigh only 8 grams, size M8 x.75 x 5.
Check Stock

Wolf Tooth Components Set of 5 Chainring Bolts+Nuts for Single-Ring (1X) Drivetrains

  • Precision Machined Chainring Bolts for Single-Ring Drivetrains.
  • These single chainring optimized bolts have a 4 mm hex socket on the bolt and a 6 mm hex socket on the nut so no spanner is needed..
  • These are 6 mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs..
  • 5 bolts and nuts weigh only 8 grams, size M8 x.75 x 5.
Check Stock

5/16-18 x 2\ (1/2\ to 6\ Available) Hex Head Cap Screw Bolts, External Hex Drive, Stainless Steel 18-8 (304), Full Thread, 15 PCS

  • High quality Grade 18-8 (304) Stainless Steel provides strength and offers good corrosion resistance in many environments..
  • Hex bolts have a variety of uses for construction, agriculture and automotive applications. They are strong, corrosion proof, and will support all of your project purposes..
  • Package Included: 15 PCS Hex Head Cap Bolts..
  • Hex Bolts are great to have around for use in wood and wet environments..
Check Stock

Trailer Slipper Spring Suspension and Tandem Axle Hanger Kit for 3 Tubes - 7000 Pound Axles

  • (4) 5 Leaf Slipper Spring for 7000 lb Axles.
  • (4) U-bolt Tie Plates for 1-3/4" or 2" Spring.
  • (8) 3-1/2" long x 9/16" diameter shackle bolts.
  • (2) 4-11/16" long x 7/8" diameter equalizer bolts.
  • This supsension and hanger kit is for a 7k tandem axle setup (14K total capacity).
Check Stock

Wolf Tooth Components Set of 4 Chainring Bolts+Nuts for Single-Ring 1X Drivetrains

  • Precision Machined Chainring Bolts for Single-Ring Drivetrains.
  • These single chainring optimized bolts have a 4 mm hex socket on the bolt and a 6 mm hex socket on the nut so no spanner is needed.
  • These are 6 mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs.
  • 4 bolts and nuts weigh only 8 grams, size M8 x.75 x 5.
Check Stock

8 Sets 5/16-18 Stainless Steel Hex Button Head Cap Screws Bolts Nuts And Flat Washers Snowblower Skid Shoe Mounting Bolts Accessories Kit for MTD 784-5580 710-0451 736-0242 712-04063 5/8 Inch

  • The package includes: you will get 8 sets of stainless steel hex button head cap screws bolts, nuts and flat washers, which is sufficient to meet your....
  • Reliable material: the snowblower skid shoe mounting bolts accessories kits are made of 304 stainless steel, which is sustained and....
  • Widely applicable: the stainless steel hex button head cap screws accessories are very suitable for installing the skid shoe plate and can replace....
  • Universal size: the size of the stainless steel snowblower skid shoe mounting bolts accessories is about (5/16-18) 5/8", which is suitable for most....
  • Easy to use: the snowblower skid shoe mounting bolts assortments are easy for you to use, they can be safely installed and released, you just need to....
Check Stock

1/4\ x 3/4\ Stainless Steel Hex Bolts, (100pcs), 18-8 (304) S/S, by Bolt Dropper.

  • ã€High Quality Stainless Steel】Bolt Dropper Hex Bolts are 100% 18-8 (304) Stainless Steel giving them one of the highest forms of corrosion resistance. This makes them the perfect choice for use in any environment (including marine/saltwater).
  • ã€Bolts You Can Depend On】Our Hex Head Bolts are very strong and are great for both indoor and outdoor use. Whether you are attaching a piling to a saltwater dock or securing a swing set, you can depend on Bolt Dropper Hex bolts to hold and last..
  • ã€Great To Keep Around】Bolt Dropper Hex bolts are great to have around for when you need them most! Use in any application, any condition, and any environment! Bolt Dropper bolts are the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion-resistant, and long-lasting!.
  • ã€Dimensions】Diameter: 1/4" | Length: 3/4" | Thread Type: 20 tpi Coarse Thread (Standard) | Quantity: 100 pcs| Material: 18-8 (304) Stainless Steel..
  • ã€Lifetime Guarantee】We are so confident that our product is the best on the market that we offer a No Hassle Lifetime Guarantee..
Check Stock

Klein Tools 32807MAG 7-in-1 Nut Driver, Magnetic Driver with SAE Hex Nut Sizes and Spring Coil Bits & 70550 Hex Key Set, 11 SAE Sizes, Heavy Duty Folding Allen Wrench Tool with Extra Long Hex Keys

  • Product 1: This Klein Screwdriver / Nut Driver allows for one-handed driving, with seven sizes in one tool.
  • Product 1: Strong, rare earth magnets (1/4-Inch, 5/16-Inch, 11/32-Inch, 3/8-Inch, 1/2-Inch) securely hold nuts and bolts.
  • Product 1: Spring coil (7/16-Inch, 9/16-Inch) holds nuts and bolts in place without the use of magnets.
  • Product 1: Hollow shafts (1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch, 9/16-Inch) for driving nuts deep onto bolts or threaded rod.
  • Product 2: Pro Folding Hex Key Set with 11 extended-reach blades.
  • Product 2: Key sizes: 1/2, 3/8, 5/16, 1/4, 7/32, 3/16, 5/32, 9/64, 1/8, 7/64, and 3/32-Inch.
  • Product 2: High-leverage blades open independently up to 270 degrees.
  • Product 2: Hex-key ends are square-cut for a secure, full-depth fit and maximum contact with the socket to prevent slippage and stripping.
Check Stock

Glvaner (8 Sets) 5/16-18 x 2-1/2' Stainless Steel Carriage Bolts Screws Round Head Square Neck and Hex Nuts & Flat Washers 304 Stainless Steel 18-8 Full Thread Coverage

  • Package Includes: 8 Pcs Carriage Bolts (5/16-18 x 2-1/2") + 8 Pcs Hex Nuts (5/16"-18)+ 8 Pcs 5/16" ID Flat Washers.
  • Screw length (including the neck): 2-1/2 inch or 63mm.
  • Material: 304 stainless steel (A2) and no exterior finish, greater strength and corrosion resistance performance than regular stianless steel or zinc plated fasteners..
  • Carriage bolts have a dome shaped head and a square neck generally requiring a hex nut and flat washer. The square neck makes them self-locking when used within a square hole..
Check Stock

5,170 Piece Grade 8 Coarse Thread Nut Bolt & Washer Assortment Fasteners Only

  • Sizes Included: 1/4 , 5/16 , 3/8 , 7/16 , 1/2 , 5/8 , 3/4.
  • 5,170 pieces of Grade 8 Coarse Thread hex bolts, lock washers, flat washers, hex nuts and nylon lock nuts finished in a protective yellow zinc coating.
  • 25 years of experience in the fasteners industry and excellent customer service.
  • Please note this listing is for the fasteners only, no storage units are included.
  • Items ship in four boxes via FedEx Express.
Check Stock

JEGS 83485 LS Rocker Arm Bolts (8)

  • Sold as a Set JEGS 83485 is manufactured using precise specifications, these rocker arm bolts feature premium steel material with a corrosion-resistant black oxide finish. These bolts are sold as a set, if you require individual replacements please use JEGS 555-83487.Note: Sold as a set of 8 fasteners, 2 sets are required for an entire....
Check Stock

Honoson 10 Pieces T-handle Hex Key Set T-key Allen Wrench Kit Sizes 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 Inches

  • Rich in size: there are various sizes in the T-key hex wrench kit, including 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 inches (including 2 mm, 2.5 mm, 3 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 8 mm, 10 mm).
  • Quality material: the hex wrenches are made of sturdy alloy steel, coated with black oxide finish, durable for lasting use.
  • The T-shaped handle is covered by plastic, non-slip for your efficient work.
  • T-key design: the T-handle hex wrenches are intended to provide you with a firm and comfortable grip, easy to stack well in a compact package, keep your tool box neat and tidy.
  • Function: the hex keys, namely Allen wrenches, are suitable to drive bolts and screws with hexagonal sockets.
  • Wide applications: these T-key hex keys are practical tools for bicycles, furniture, motorcycles, RC rars, machinery, vehicles, robotics and so on.
  • Please note that there are 10 pieces of T-handle hex key in this set, please select the corresponding T-handle hex key for the screw port you need to use.
Check Stock

100% 304 Stainless Snow Blower Impeller Modification Kit, 3/8inch 3-Blade Universal – Modifies 2-Stage Machine Including Installation Hardware, Repeated and Use Durable in Various Conditions (3)

  • Product includs:3-Rubber Paddle , 3-Metal Straps , 9-Bolts & Lock Nuts , 3-Self-tapping Screws.
  • The traditional zinc coated screw, after long time use, will inevitably rust with the nut and become welded together. This makes it impossible to repeat use after unscrewing. Our screws are made of 304 stainless steel, which means it can stand years of harsh environment while being rust-resistant. Because of this, you can expect to use it again and again..
  • Rubber Paddle 3/8″ thick(2″W x 5″L), Made from Styrene Butadiene rubber (SBR rubber) ,SBR rubber with minimum tensile strength of 725 PSI (5 MPA),Hard rubber with a durometer of 65-75.
  • Metal Strap with holes – 1 3/8″ W x 3 3/4″L ,Punched flat bar stainless steel materials, 1/16″ thick.
  • Bolts (5/16-18 x 1 in. coarse thread) w/ 5/16-18 lock nuts (use 1/2″ wrench & socket).
  • Hex Bolts,Hex lock nuts nylon inser,self-tapping screw (#14 x 1),Sheet metal screw, Hex washer head self drilling, Stainless Steel Materials.
  • The Purpose of the Kit : This kit reduces the existing “gap” between the snow blower’s impeller blades and the impeller chamber wall. The smaller the gap, the greater your machine’s operational efficiency and snow throwing capability will be, a....
Check Stock