Categories

Best 5 8 Inch J bolts

CTA Tools 9030 Fluted Screw Extractor Set 5-Piece

  • Bolt, Stud or Screw Size: 1/4 to 5/16-Inch and Drill Size: 1/8-Inch.
  • Bolt, Stud or Screw Size: 3/8-Inch and Drill Size: 3/16-Inch.
  • Bolt, Stud or Screw Size: 7/16-Inch and Drill Size: 15/64-Inch and Pipe Size: 1/8-Inch.
  • Bolt, Stud or Screw Size: 1/2 to 9/16-Inch and DrillSize: 5/16-Inch and Pipe Size: 1/4-Inch.
  • Bolt, Stud or Screw Size: 5/8-Inch and Drill Size: 3/8-Inch and Pipe Size: 3/8-Inch.
Check Stock

ARONOVA Battery Hold Down Sets,With Billet Aluminum Battery Tie Down Bracket And 18-8(304) Stainless Steel J bolts(Red, 8 inch bolts)

  • Premium 6061 aluminum crossbar & 18-8 Stainless steel j bolt sets..
  • Designed for batteries 6.89" (175mm) wide or slightly narrower..
  • Tie down bracket overall length - 8.58" (218mm),bolt center to bolt center length - 7.48" (190mm).Available in 8/10 inch j hooks.
  • Exclusive Finishment: Dual surface treatment, Eliminate the mill marks and burrs of CNC machining,and the bracket is sand-blasted and anodized for an elevated, frosted texture..
  • Usually fits most group 21, 21R,22F,22HF,22R, 24, 24F, 24H, 24R, 24T, 25, 26, 26R, 26/70 27, 27F, 27H, 28, 29H, 30H, 31, 31A, 31T, 33, 34, 34R, 34/78, 35, 40R, 41, 42, 43, 46, 47, H6(48), H8(49), 85, 86, 90, 91, 92, 93, 94R,95R, 96R,97R, 98R, 99, 124, and 140R batteries.(Tips: this tie down will NOT fit between raised vent caps on the surface of some batteries).
Check Stock

ALEKO Small J-Bolt Hinge for Doors and Driveway Gates - 5/8 Inch - LM144

  • Our j-bolt hinge is the perfect complement to your door or swinging gate.
  • The hinge pivots on an adjustable steel ball bearing and includes a grease fitting which keeps the bearing lubricated.
  • Made for ALEKO brand iron doors and galvanized steel driveway gates, but will work anywhere you need a strong and reliable hinge.
  • Comes with all necessary fixings, including (2) bolts, (2) nuts, and (2) washers.
  • For a more in-depth breakdown of dimensions see product images.
Check Stock

LotFancy Adjustable Battery Hold Down, Universal Battery Bracket with J Hook, Battery Tie Down Kit, 9.1inch (23cm) Bolt Length

  • Adjustable: Bolt length: 9.1inch (23cm). 3.74inch long thread for height adjustment. Adjustable cross-bar expands from 5.7" to 8.5" wide. Thread size: 1/4"-20 UNC. Please confirm your battery size before purchasing.
  • High Quality: This car battery hold down is made of premium iron, sturdy and available for long service life. The surface is anodized for enhancing its corrosion and rust resistance.
  • J Hook: Compared with other’s L hook, our J hook can hold down battery more securely. It won’t slide out of the tray easily.
  • Easy to Install: Adjust the width and height according to the size of the battery, hook the J hook into the hole on the tray, tighten the wing nut screws to ensure a firm grip on the battery. The battery holder provides steady holding for the battery.
  • For Most Battery Size: This adjustable battery holder can be used for group 21，21R，22F, 22R, 24, 25, 26, 26R, 27, 31, 33, 34, 34R, 35, 36R, 41, 42, 43, 46, 47, 48, 49, 65, 78, 94R Batteries and most group size batteries.
Check Stock

Tnisesm Adjustable Battery Hold Down, with Universal Crossbar 8 Inch 304 Stainless Steel J Hook Bolt Sets

  • Car battery hold down is made constructed with Premium iron crossbar & 304 Stainless steel j bolt sets, sturdy, and available for long service life.Special spray process for enhancing its corrosion and rust resistance..
  • Universal adjustable crossbar, from 13.5cm/5.35" to 20cm/7.85" wide, with 8inch J-Bolt..
  • The surface is anodized for a matte and durable finish. Easy to install and uninstall, provides steady holding for the battery. Please confirm size specifications for fitment before purchasing..
  • Simple design,easy installation, replace your old battery holder directly..A perfect modification accessory for racing, sports car, RV,boats,etc..
  • Tips:Before ordering, please measure the battery size to confirm the bracket fit and select the proper bolt length..
Check Stock

US Motors AST125 Nidec Replacement Swimming Pool Pump Motor

  • Replacement 1.25 Total Horsepower (THP) swimming pool pump motor.
  • Standard 56J-Frame, C-Flange motor with threaded shaft.
  • Features four 3/8-Inch threaded bolt-holes at 1, 5, 7 and 11 o’clock.
  • Designed to replace a 1-HP Up-Rated or 3/4-HP Full-Rated motor and compatible with 115/230 volts.
  • Fits a wide variety of pool pumps including American Products, Pentair, Astral, Hayward, Jacuzzi and Jandy.
Check Stock

Homax 80099 No-Sag EasyGate Bracket Kit

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

ACROTOL 26 Pieces Bolt Extractor Set, Spiral Screw Extractor Set and Drill Bits, Extraction Socket Set for Removing Damaged, Rusted, Rounded Bolts, Nuts and Screws

  • [Specifications] 26 PCS Screw&Bolt Extractors/Drill Bit Set includes 6 easy out style spiral flute extractors, 13 PCS bolt&nut extractors, 1 PC 1/4" hex adapter and 6 PCS drill bits..
  • [Size] Nut&Bolt Extractor Size: 1/4inch, 5/16inch (8mm), 3/8 inch, 10mm, 7/16 inch (11mm), 12mm, 1/2inch, 13mm, 9/16inch (14mm), 5/8 inch (16mm), 17mm, 11/16 inch, 3/4 inch (19mm), included 3/8"-1/4" hex adapter. Spiral Flute Extractors Size: 1#, 2#, 3#, 4#, 5#, 6#. Drill Bits Size: 3/32", 1/8", 5/32", 1/4", 9/32", 3/8"..
  • [Material] Every screw & bolt extractor is made from high hardness chrome-molybdenum steel, the cobalt drill bit is made from HHS..
  • [Note] Cobalt drill bits should not used for stainless steel. The bolt extractor with unique plum-shaped internal thread design provides excellent torque and can be used to rotate fasteners with deep bolts..
  • [Function] Spiral flute extractors are perfect for common fasteners, the bolt extractors are for freeing partly-exposed fasteners. The kit also includes right hand cobalt drill bits for fasteners, which can be used to help drill these fasteners..
Check Stock

Nidec AST165 1.65 Horsepower 56J C-Flange Replacement Swimming Pool Pump Motor

  • Replacement 1.65 Total Horsepower (THP) swimming pool pump motor.
  • Standard 56J-Frame, C-Flange motor with threaded shaft.
  • Features four 3/8-Inch threaded bolt-holes at 1, 5, 7 and 11 o’clock.
  • Designed to replace a 1.5-HP Up-Rated or 1-HP Full-Rated motor and compatible with 115/230 volts.
  • Fits a wide variety of pool pumps including American Products, Pentair, Astral, Hayward, Jacuzzi and Jandy.
Check Stock

D&D Technologies TCHDMA1 Multi-Adjust Heavy Duty Gate Hinges, for Self Closing Wood and Vinyl Gates up to 132 Pounds, 3-Way Adjustable, Gap up to 1 3/8", Black, 2 Count

  • 900LB Capacity per hinge - Ball Bearing With Grease Zerk Fitting LISTING IS FOR 2X COMPLETE GATE HINGE SET.
  • The hinges are precision machined from high strength, solid cold roll steel bar. They are fitted with ball bearing for extra smooth easy operation..
  • Unlike ordinary hinges that will seize up fail to work due to age and weather conditions, these will always operate like new. Zerk fitting for adding grease makes for hinges that will last a very long!.
  • SPECIFICATIONS: -Weight capacity per hinge: 900 lbs -Hardened, heat treated cold rolled steel. -Precision Machined -Ball Bearing -Zerk fitting for greasing -Welding Tabs -J Bolt length is 7-1/4" -3/4" J-Bolt with Zinc Plated Nuts and Washers -Barrel is 4-5/8" by 1-9/16" -Powder coated.
  • Includes: -2x Heavy Duty Steel Hinge Set - 3/4" J-Bolt style with weld tabs - Ball bearing and zerk fitting for grease.
Check Stock

CURT 25388 Channel-Mount Adjustable Trailer Coupler Hardware Kit

  • Includes bolts for attaching a CURT channel-mount coupler to a channel (sold separately).
  • Compatible with CURT channels #48610 or #48650, and any CURT channel coupler.
  • Features grade-8 bolts for a solid mount.
  • Includes two 5/8-inch x 4-3/4-inch hex bolts, two 5/8-inch nylock hex nuts and four 5/8-inch flat washers.
Check Stock

CURT 25389 Channel-Mount Adjustable Trailer Coupler Hardware Kit

  • Includes bolts for attaching a CURT channel-mount coupler to a channel.
  • Compatible with CURT channels #48610 or #48650, and any CURT channel coupler.
  • Features grade-8 bolts for a solid mount.
  • Includes two 5/8-inch x 4-3/4-inch hex bolts, two 5/8-inch nylock hex nuts and four 5/8-inch flat washers (coupler sold separately).
Check Stock

J bolt gate Hinges Heavy Duty 5/8\ pivot hinge Adjustable Barrel Driveway Pair for welding

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock