Best 5 Mpa Solenoid Valves
Beduan 12V Plastic Water Electric Solenoid Valve Normally Closed 1/2
- Voltage: DC 12V. Thread Size : 1/2" G. Working Temperature : 32-212°F ,Working Pressure : 0.01~0.8Mpa.
- The electric solenoid valve is made of high quality plastic and brass material, with long serving life ..
- If your central heating or irrigation sprinkler system isn't working correctly it could be down to the solenoid valve. Repair a faulty valve with this brand new, fast acting 12V DC diaphragm-style replacement..
Check Stock1\ HEAVY DUTY HIGH FLOW IN-LINE COMPRESSED AIR PRESSURE REGULATOR 180 CFM
- CO2 pressure regulator has two valves to independently measure flow rate and remaining CO2 tank contents (CO2 tank sold separately).
- Valves have dual-scale readings in psi and kg/cm.
- Needle valve flow control provides precise flow adjustment and measurement.
- Includes flow regulator, needle valve, electronic solenoid, and bubble counter.
- NOTE:Kindly refer to the Regulator Set Up Procedure provided as a PDF manual in the product description section.
Check StockAC Compressor Control Solenoid Valve Replacement Compatible with VW Audi Sanden BOLT DOWN STYLE PXE16 PXE13 MK5
- Highest quality control valve available GUARANTEED! Our valves use the highest quality materials. Be cautious of cheap valves as most are factory B stock from sanden and have an incredibly high failure rate!.
- PLEASE PHYSICALLY CHECK YOUR A/C COMPRESSOR BEFORE ORDERING several different manufactures for the AC compressor were use! This solenoid is ONLY COMPATIBLE WITH SANDEN PXE16 PXE13 COMPRESSOR VALVE HELD IN WITH A BOLT!.
- Compatible with many Volkswagen / Audi applications from 2006 + including Jetta and Golf TDI. The OEM and other aftermarket brand solenoid have an EXTREMELY high failure rate! Will cause intermittent / no AC issues.
- WILL ONLY FIT SANDEN COMPRESSORS WITH VALVES HELD IN WITH A BOLT! PLEASE PHYSICALLY CHECK YOUR COMPRESSOR BEFORE ORDERING!.
Check StockMotorized Ball Valve- 1/2\ Brass Electrical Ball Valve with Full Port, 9-24V AC/DC and 3 Wire Setup by U.S. Solid
- SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable.
- The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
- NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards.
- This electrical ball valve is full port, meaning the bore in the ball is a full 1/2”.
- This minimizes pressure loss through the valve.
- 9V-24V AC/DC- Works effectively over entire voltage range.
- No power expended once fully open or fully closed.
- 3 WIRE, 2 POINT CONTROL SETUP- Simple three wire connection, with two points of control.
- ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
- This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.
Check Stock10/2 with Ground Flat Yellow Submersible Well Pump Cable 600V (125FT)
- Manual hydraulic water pressure test pipeline tester.Fine workmanship and good performance. Easy to use. Durable in use..
- Suitable for water, or hydraulic oil as a medium, for a variety of pressure vessels, pipes, valves and other pressure test, but also for hydraulic energy, to provide the required pressure.
- for chemical, construction, plumbing, oil, coal, Shipbuilding and other industries..
- Normal tap water pressure of 0.3MPa, high-rise residential 0.4MPa, water pipe pressure pressure generally pressurized to 0.8MPa-1.0MPa. ..
- Long working life, It is smooth operation, high efficiency, good performance. Small volume, low noise..
- Our small pump is designed with a mini size and light weight, it is easy and convenient to use..
Check StockMotorized Ball Valve- 1/2\ Brass Ball Valve with Full Port, 9-24V AC/DC and 2 Wire Auto Return Setup by U.S. Solid
- SAFE AND RELIABLE- Made of durable brass, this valve is safe and reliable.
- The estimated life expectancy of 80,000 to 100,000 cycles means it is built to last.
- NPT THREADING-½” quality brass thread, manufactured and measured according to National Pipe Thread standards.
- This electrical ball valve is full port, meaning the bore in the ball is a full1/2”.
- This minimizes pressure loss through the valve.
- 9V-24V AC/DC- Works effectively over entire voltage range.
- Limit switch minimizes power after valve is fully open.
- Ideal for projects where an automatic return is necessary.
- 2 WIRE AUTOMATIC RETURN SETUP- Simple two wire connection, valve largely de-energizes after opening.
- Returns to fully closed if power is removed.
- ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed.
- This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.
Check StockDIGITEN DC 12V 1/4 Inlet Feed Water Solenoid Valve Quick Connect N/C normally Closed
- DC 12V 1/4" Quick connect Solenoid valve..
- Working pressure:0.02-0.8Mpa. Its working temperature:32-158℉ (0-70℃)..
- It will become hot because there are so many coils inside. It’s normal and safe phenomenon. The highest working temperature of this product reaches 60℃. If you want it works long hours, you should find a N/O normally open solenoid valve..
Check Stock1/4inch DC 12V 2 Way Normally Closed Electric Solenoid Air Valve
- .WIC Valve is compatible with SMC valves. Has two holes in the bottom and can be mounted in any position..
- .2ACK Series valve is a Zero differential solenoid valve which can be operated at 0 PSI (Vacuum)..
- .Comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constant energized..
- .This solenoid valve has one G1/4" inch DN8 inlet and one G1/4" inch DN8 outlet port. Valve stays close when the coil is de-energized- and it opens when energized..
- .1/4inch DC 12V 2 Way Normally Closed Pneumatic Aluminum Electric Solenoid Air Valve WIC Valve 2ACK series 2-way normally closed solenoid valve is to control On/Off of air and inert gas..
Check StockDC 5V 12V 18V 24V 5A 150W PWM Motor Speed Controller, Mini Speed Control Switch, Speed Regulator with Stepless Variable Rotary Knob - for Electric Motor, Brush Motor, Car, Generator, Fan (DC 5-30V)
- Wide voltage range - DC 5-30V PWM motor speed controller switch, rated output current 5A, maximum output current 15A, max power 150W.
- Settable duty cycle, duty cycle upper and lower limits and working frequency - set up these 3 parameters according your own motors.
- comes with start and stop button and can be controlled by external switch.
- High percision digital encoder knob - can adjust the motor speed , more accurate and consistent than ordinary potentiometer, easy to match the value.
- Soft-start protection - the current increases slowly when starting the motor, avoid the high shock current, effectively protect the motor and extend its service life.
- Widely applications - good to control the output of power, brightness, speed.
- perfect for DC drive motor, generator, LED lights, light bulbs, lamp, car, fan, micro-pumps, solenoid valves, micro-pumps, solenoid valves.
- (Note: This product can only be used for DC brushed motors, not for brushless motors).
Check StockHappybuy 10152 PSI Hydraulic Electric Pump 750W Double Acting Hydraulic Driven Pump 110V 7L Solenoid Pedal Hydraulic Power Pack Cylinder Hydraulic Pump
- Efficient Motor: Equipped with a single-phase asynchronous motor, 750W, with aluminum shell, this electric hydraulic pump is energy efficient, powerful, and durable. Hydraulic pump working pressure: 2Mpa to 70Mpa. Rotate speed:1400r/min. Flow rate: 0.6L/min - 5L/min..
- Large Capacity Tank: With a hydraulic pump tank, 7L capacity, the hydraulic power pack is efficient. A visible window for monitoring the inside. The pump uses the 15 - 46 anti-wear hydraulic oil. It features compact size, lightweight, simple structure, and ease of use..
- Accurate Pressure Gauge: This air hydraulic pump has a precise pressure gauge, resistant to shock, helping to observe the pressure when the pump is working at any time. From 7Mpa to 70Mpa, you can try slowly and choose the right working pressure you need..
- Effective Oil Volume: Manage this double-acting hydraulic gear pump by the solenoid valve. The high-pressure oil pipe is of high quality and durability. Control two with double pipes..
- Various Application: The manual hydraulic pump can be used for a variety of hydraulic equipment, working on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. Reduce manual work and maximize work efficiency..
Check Stock9L2Z7G391A Automatic Transmission Control Solenoid Pack Assembly Fits for Ford Explorer 2003-2010 Mustang 05-10 Thunderbird 04-05 Mercury Mountaineer 03-10 Lincoln Aviator 03-05 LS 04-06 5R55S 5R55W
- Transmission solenoids are one of your automatic transmission’s many critical components. A transmission solenoid is an electro-mechanical component “valve” used to control the flow of transmission fluid in the transmission, and they open and close as per the electrical signals they receive from your vehicle’s engine or transmission control unit, which pulls its data from a series of speed sensors in the engine..
- Modern automatic transmissions use pressurized hydraulic fluid to change gears. Every time a gear change is required, the car’s computer activates a transmission solenoid, which directs transmission fluid into the valve body to engage the correct gear. If one of these electro-mechanical valves fail, then all sorts of transmission problems can ensue..
- This Automatic Transmission Control Solenoid Fits For the Following Vehicles: 2003-2010 Ford Explorer 6 Cyl 4.0L, 8 Cyl 4.6L, 8 Cyl 4.6L.
- 2007-2010 Ford Explorer Sport Trac 6 Cyl 4.0L , 8 Cyl 4.6L.
- 2005-2010 Ford Mustang 6 Cyl 4.0 , 8 Cyl 4.6L, 8 Cyl 5.4L.
- 2004-2006 Lincoln LS 6 Cyl 3.0L, 8 Cyl 3.9L.
- 2003-2010 Mercury Mountaineer 6 Cyl 4.0L, 8 Cyl 4.6L, 8 Cyl 4.6L..
- Customers can find the product you need accurat....
Check Stock28250-P6H-024 Transmission Dual Linear Shift Solenoid Gasket For Honda Acura Accord Odyssey Prelude Pilot 1998-2003 Replace 28250P6H024
- ✔【Ideal replacement】:A bad solenoid cannot effectively control the flow of transmission fluid, causing delays or unexpected friction between the shift gears. This solenoid is comparable in fit, form and function to the original part, exactly OEM design to replace your defective solenoid.
- ✔【Compatible with】Fits for 1998-2002 Honda Accord 4 Cyl, 1998-2007 Accord 6 Cyl, 1998-2006 Odyssey, 2003 2004 2005 2006 2007 Pilot, 97 98 99 00 01 Prelude | 1998-1999 Acura 2.3 CL, 1998-1999 Acura 3.0 CL, 2001-2003 Acura 3.2 CL, 1999-2003 Acura 3.2 TL, 01-02 Acura MDX.Please check the part number to compare whether it suits your car before you purchase..
- ✔【Transmission Shift Solenoid Replace OEM】 : 28250-P6H-024, 28250P6H024..
- ✔Package include: 1 x Linear Solenoid + 1pcs gasket +3pcs O-rings.
- It is consisting of a spring loaded plunger wrapped with a coil of wire, and design to open or close valves in the valve body to permit transmission fluid to enter..
- ✔【Product Warranty】: 12-Month Warranty: If the torque converter solenoid fails, stops working or any other problems, you can rely on our service of carefree REPLACEMENT or REFUND..
Check StockRKX AC Compressor Control Solenoid Valve Compatible with Audi and Volkswagen Compressors made by Sanden PXE16 PXE14 MK5 MK6 B8 TDI
- Highest quality control valve available GUARANTEED! Our valves feature premium quality materials and craftsmanship. All valves undergo rigorous quality testing and inspections. Our valves are manufactured in an ISO 9001, IATF 16949 certified facility..
- PLEASE PHYSICALLY CHECK YOUR COMPRESSOR BEFORE ORDERING The manufacture used several suppliers for the AC compressor! This solenoid is only compatible with Sanden PXE16 PXE14 compressors held in with a snap ring and are visually identical..
- Please note this is a new updated valve and may be longer than the valve found in your compressor. It is 100% compatible with the short style valve..
- Compatible with Audi and Volkswagen vehicles from 2006 + including Jetta and Golf TDI. The OEM and other aftermarket brand solenoid have an EXTREMELY high failure rate! Will cause intermittent / no AC issues.
- THIS IS VALVE IS SECURED INTO THE COMPRESSOR BODY USING A SNAP RING. If your valve is held in with a bolt please see our other listing. This part is only compatible with Sanden compressors. If you compressors is manufactured by another company please check our other listings..
Check Stock