Categories

Best 5ways To Die

Khanka Hard Storage Case Replacement for Milwaukee 2485-20 M12 FUEL Right Angle Die Grinder, Case Only

  • Sleek design, a case designed for milwaukee 2485-20 right angle die grinder, fits perfectly. The hard shell of this milwaukee m12 grinder is black. You can put the m12 grinder in a hard case specially designed for the milwaukee right angle die grinder for easy portability when you go out..
  • This milwaukee m12 angle die grinder hard case, the interior is made of high quality velvet, the soft inner structure ensures the protection of the milwaukee tools angle grinder. The milwaukee m12 die grinder has a hard case with a mesh design on one side to store your m12 die grinder accessories and soft storage on the other side for your milwaukee die grinder..
  • This milwaukee die grinder m12 hard shell case is made of high quality EVA material, which is shockproof, dustproof and waterproof, it can protect your milwaukee small angle grinder from shocks and splashes when you go out to carry. Put the milwaukee angle grinder tool in the box after using the milwaukee 2485-20 right angle die grinder at home to prevent the milwaukee m12 grinder from accumulating dust.
  • This hard case designed for m12 2485-20 grinder keeps your milwaukee right angle die grinder safe, convenient and lightweight. The classic zipper design makes it easy to open and close. This milwaukee m12 ang....
Check Stock

DZNTOOLS Rivet Dies Eyelets Grommets Molds Snap Dies Prong Set Popper Fastener Hand Press Machine

  • Rivet Dies Eyelets Grommets Molds Snap Dies Prong Set Popper Fastener Hand Press Machine.
  • 1 piece of Hand Press Machine 1 set of Snap Die 10 mm 1 set of Snap Die 12.5 mm 1 set of Snap Die 15 mm 1 set of Rivet Die 5 mm 1 set of Rivet Die 6 mm 1 set of Rivet Die 7 mm 1 set of Rivet Die 9 mm 1 set of Rivet Die 11 mm 1 set of Eyelet Die 4.5 mm 1 set of Eyelet Die 5.4 mm 1 set of Eyelet Die 6 mm 1 set of Eyelet Die 7.5 mm 1 set of Eyelet Die 9 mm 1 piece 2mm Hole Puncher 1 piece 4mm Hole Puncher 1 piece Brass Base for a hole cutter.
  • Suitable for leather, fabrics, jeans, costumes etc..
Check Stock

Redding Competition Bushing 3-Die Neck Sizer Set 6.5 Creedmoor

  • Competition Bushing Sizing Die -- With this die, the cartridge case is completely supported and alig.
  • The Body Die -- is designed to full length resize the case body only and bump the shoulder position.
  • Competition Seating Die -- The bullet guide to seating stem fit is so precise that the seating stem.
Check Stock

Hornady Match Grade 2 Die Set, 6.5 Creedmoor (.264) (544655) - Caliber Specific Reloading Equipment for Handloaders with Full Length Sizer Die, Seating Die with Roll Crimp, Sure-Loc Rings, & Storage

  • Die Set for the Avid Reloader - hand crafted and polished for an unmatched finish, the Hornady Match Grade Die 6.5 Creedmoor Die Set 2-Die Set (.264) (544655) give you total control over neck tension when resizing. Tight tolerances at the press translate into tighter groups at the range..
  • Find the Match Grade Bushing Dies You Need - these precision dies give the handloader more control over the loading process. They feature self-centering, interchangeable neck sizing bushings, that are held to strict tolerances to provide superior accuracy to eliminate the chance of over-sizing your case necks and overworking the brass (not included with die).
  • Full Length Sizer Die - features precision-polished elliptical expander to reduce friction and case-neck stretch. The dimension of the bushing (inside diameter, listed) determines the neck size when the brass is inserted into the die.
  • Seating Die - features seater adjustment screw, built-in crimper, locking retainer spring as well as a floating bullet seater alignment sleeve and seating stem, which pre-aligns the bullet and case before seating occurs. Hornady Bushings work in both the neck and full length Match Grade dies. The bushings are available in .001" increments..
  • Precise Machining for Accurate Reloading - H....
Check Stock

Hornady Match Grade 2 Die Set, 338 LAPUA MAG (.338) (544399) - Caliber Specific Reloading Equipment for Handloaders with Full Length Sizer Die, Seating Die with Roll Crimp, Sure-Loc Rings, & Storage

  • Die Set for the Avid Reloader - hand crafted and polished for an unmatched finish, the Hornady Match Grade Die 338 LAPUA MAGNUM 2-Die Set (.338) (544399) give you total control over neck tension when resizing. Tight tolerances at the press translate into tighter groups at the range.
  • Find the Match Grade Bushing Dies You Need - these precision dies give the handloader more control over the loading process. They feature self-centering, interchangeable neck sizing bushings, that are held to strict tolerances to provide superior accuracy to eliminate the chance of over-sizing your case necks and overworking the brass (not included with die).
  • Full Length Sizer Die - features precision-polished elliptical expander to reduce friction and case-neck stretch. The dimension of the bushing (inside diameter, listed) determines the neck size when the brass is inserted into the die.
  • Seating Die - features seater adjustment screw, built-in crimper, locking retainer spring as well as a floating bullet seater alignment sleeve and seating stem, which pre-aligns the bullet and case before seating occurs. Hornady Bushings work in both the neck and full length Match Grade dies. The bushings are available in .001" increments..
  • Precise Machining for Accurate Reloading - Hornady....
Check Stock

Williams B-52A 3/8-Inch Drive Round Head Ratchet

  • Adjustable Die Handle Round Die Stock Wrench Holder with adjustable screws. Suitable for making or repairing male and female threads. Good for general purpose applications..
  • Special Design: High-speed steel machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. With adjustable screws, the die stock can securely hold round dies..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads..
  • Measure the size manually. If the product you receive does not meet your needs, please contact us and we will do our best for you..
Check Stock

Howards End

  • PRECISE MATING OF LOCK RING: Easy-to-use cross bolt connects the two ends of the ring instead of a traditional screw design that tightens directly into the threads of the die, resulting in a more precise mating of the lock ring threads to the die threads..
  • RELIABLE ALIGNMENT: Full size lock ring provides a more reliable alignment with no canting, and no damage to the die threads, which remain undamaged..
  • EASY ADJUSTMENT: Tightening or loosening the steel cross bolt screw requires only a 7/64″ Hex/Allen Key (not included)..
  • STANDARD FIT: The Forster Cross Bold Die Lock Rings fit standard 7/8″-14 thread dies from most manufacturers..
  • FOR FORSTER SEATER & SIZING DIE: Works with all Forster Products high-quality sizing and seater dies. The Forster DIE-G-10 is a direct replacement part for the lock rings on Forster sizing and seater dies..
Check Stock

Lathe Tailstock Sliding Tap Die Holder MT2 Shank - Tapping Threading Reaming Drilling - 2MT

  • Lathe Tailstock Sliding Tap Die Holder MT2 Shank - Tapping Threading Reaming Drilling - 2MT.
  • ​​​A Tail Stock Tap Die Holder Should Be Among The First Accessories a Machinist Makes For His Lathe, Since Threading With A Hand Held Die Stock....
  • 3 Die Holders Are Interchangeable & Can Hold Die Sizes of 13/16" + 1" + 1-1/2"..
  • 3 Tap Holders Are Interchangeable & Can Hold Taps 0" to 1/4" + 1/4" to 1/2" + 1/2" to 3/4".
  • EXCLUSIVE - TAP AND DIE HOLDER SET - OTHER SIZE MT1 AND MT3 IN OUR SHOP !.
Check Stock

Hornady Custom Grade New Dimension 2-Die Set, 6.5 CREEDMORE (.264) (546289)- Caliber Specific Reloading Equipment for Handloaders with Full Length Sizer Die, Seating Die, Sure-Loc Rings, & Storage Box

  • Die Set for the Avid Reloader - hand crafted and polished for an unmatched finish, the Hornady Custom Grade New Dimension 2-Die Set for 6.5 CREEDMORE (.264) (546289) is necessary for each cartridge that you reload to decap, de-prime, resize, and seat/crimp the bullet.
  • Find the Custom Grade Dies You Need - these precision dies give the handloader more control over the loading process. Depending on the caliber of die set/alignment sleeve you are using, the Hornady Crimp/Seater Die will either "taper" or "roll" crimp your cases.
  • Full Length Sizer Die - features a Zip Spindle, with a series of light threads cut on the spindle and spindle collet. This eliminates spindle slippage and makes tightening the spindle lock a breeze when making adjustments.
  • Seating Die - the floating bullet alignment sleeve and stem improve bullet seating and accuracy by pre-aligning the bullet and case before seating. The Hornady bullet seating die also applies a crimp to secure the bullet in the case.
  • Precise Machining for Accurate Reloading - Hornady reloading dies are designed for a true match to your chamber. Keep several appropriate Hornady die sets for each caliber size at your reloading bench. Includes a full length sizer die, seating die, plastic storage box, two Sure-Loc ri....
Check Stock

LEE PRECISION 90963 9-mm Carbide 4-Die Set Luger Grey

  • Includes Carbide Full Length Die, Bullet Seating Die, Powder Thru Expanding Die, Carbide Factory Crimp Die, Universal Shell Holder, Powder Dipper and....
Check Stock

Sizzix Adhesive Sheets, 6 by 6-Inch, 10/Pack

  • With the easy peel strip, these Adhesive Sheets are quick and easy to use. You can use them to transform your die cuts into stickers. Simply peel off the backing, adhere to your card stock, place your die on the card and roll through your die-cutting machine. Peel off the other backing from your die-cut and adhere to your make. Alternatively, you could make the sticker and use the sticky side to adhere glitter or gold leaf to decorate your die-cut..
  • This package contains ten 6×6 inch adhesive sheets.
Check Stock

Hornady Lock-N-Load Die Bushings, 10 Pack – Change Dies Quickly with a Simple Twist – Compatible with All Reloading Presses - Item No. 044096

  • Hornady Lock-N-Load Die Bushings – The Lock-N-Load bushing system will forever change the way you switch from one caliber to another. Lock-N-Load technology allows you to change dies and start loading another caliber in a matter of seconds. Includes 10 die bushings.
  • Maximize Reloading Time – Quickly and easily change from one die to another with a simple twist.
  • Positive Locking Action – Holds the dies in perfect alignment. Compatible with all Hornady Reloading Presses.
  • The Easy Way – Get the most out of your reloading press. Change the caliber by a simple twist of the die counterclockwise.
  • How to Use – Thread your die (7/8"-14 thread) into the Lock-N-Load Die Bushing and insert the assembly into the press bushing. Twist it clockwise to lock it in to position, then adjust your die as usual and tighten the lock ring.
Check Stock

Sizzix Accessory Black Mini Set Inspired by Tim Holtz Die cutting tool kit

  • MINI TOOL SET - The perfect black mini set that has been inspired by Tim Holtz, it's a great accessory to your crafting kit..
  • DIE PICK - The Die Pick, picks scraps out of dies and small pieces of paper from the die cut-out..
  • MINI DIE BRUSH - The Mini Die Brush rolls away excess paper in any wafer-thin, chemically-etched die..
  • MINI FOAM PAD - Mini Foam Pad act as a perfect work surface for removing excess paper from the dies and the cut-out!.
  • PRODUCT DIMENSIONS – Foam Pad (5. 2” x 0. 5” x 0. 5”).
Check Stock