Best 6 flute Reamer

29/32\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56018P, USA Made

• When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
• 1 1/2 " flute length, Partial Flute Length Carbide.
• 3/4 " shank diameter, For Reaming abrasive material.
• This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

15/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56069P, USA Made

• When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
• 1 1/2 " flute length, Partial Flute Length Carbide.
• Morse taper shank #3, For Reaming Abrasive Material.
• This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

29/32\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56068P, USA Made

• When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
• 1 1/2 " flute length, Partial Flute Length Carbide.
• Morse taper shank #2, For Reaming Abrasive Material.
• This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

13/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56065P, USA Made

• When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
• 1 3/8 " flute length, Partial Flute Length Carbide.
• Morse taper shank #2, For Reaming Abrasive Material.
• This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

1 3/16\ Expansion Reamer, Carbide Tipped, Straight Shank, Partial Flute Carbide 56026P, USA Made

• When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
• 1 3/4 " flute length, Partial Flute Length Carbide.
• 1" shank diameter, For Reaming abrasive material.
• This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

1 7/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56080P, USA Made

• When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
• 2" flute length, Partial Flute Length Carbide.
• Morse taper shank #4, For Reaming Abrasive Material.
• This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

1 5/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56078P, USA Made

• When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
• 1 7/8 " flute length, Partial Flute Length Carbide.
• Morse taper shank #4, For Reaming Abrasive Material.
• This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

17/32 HSS Hand Reamers, Spiral Flute, Right Hand Cut, Michigan Drill Series 565

• Alloy Tool Steel Reamer: Hard and durable, reaches H8 level of drilling accuracy, and reduces surface roughness of workpieces.
• Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
• Hand Reamer: Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
• Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
• Application: Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..

ADJUSTABLE EXPANDING HAND REAMER 4 PIECE SET 1/4\- 3/8\ - NEW MICRO REAMER SET

• Alloy Tool Steel Reamer: Hard and durable, reaches H8 level of drilling accuracy, and reduces surface roughness of workpieces.
• Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
• Hand Reamer: Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
• Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
• Application: Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..

Drill America Bridge (Construction) Reamer 1\ Magnetic Hex Shank Bridge Reamer

5/8 Bridge Reamer Bridge/Construction Reamer 1/2 Shank M2 HSS Taper Chucking Reamer Bit Tool for Steel Metal Alloy Wood Plastic Drilling Hole

• Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
• Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
• Size Infor: Length of chucking reamer is 6.5 inch.
• Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
• Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.

uxcell Hand Reamer 5mm Alloy Tool Steel H8 6 Straight Flutes Hand Milling Cutter Tool 2Pcs

• The reamer range is 15/32 inch to 1-1/2 inch..
• Product includes 11Pcs high speed adjustable hand reamers H4-H14..
• The adjustable reamer is made of HSS(high speed steel) with good hardness and toughness..
• Adjustable reamer is straight flute with straight handle..
• The reamer is suitable for drilling machines and other machine..

Utoolmart Adjustable Hand Reamer 23-26mm High Speed Steel H8 Milling Cutter Tool 1pcs

• 【High-speed Steel Tool】- Good for general purpose applications, offering combination of hardness and toughness for wear resistance.
• 【Uncoated Tool】- Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
• 【Hand Reamer】- Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
• 【Straight Flute Tool】- Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
• 【Application】- Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..