Categories

Best 65k Color Oled Display

LG 27" Ultragear™ OLED QHD Gaming Monitor with 240Hz .03ms GtG & nVIDIA® G-SYNC® Compatible (Renewed)

  • 27" QHD (2560 x 1440) OLED Display - Bring big time color to the screen. The LG UltraGear OLED 27" display lets you explore HDR content the way it was meant to be seen with DCI-P3 98.5%—an elevated color spectrum that showcases brilliant color..
  • 240Hz Refresh Rate - Gear up for smooth gameplay with an ultra-fast 240Hz OLED display. The faster speed lets you respond quickly to opponents and stay a step ahead of the competition..
  • 0.03ms (GtG) Response Time - Enjoy smoother scenes with less lag or ghosting thanks to LG UltraGear OLED's nearly instantaneous 0.03ms (GtG) response time..
  • 1.5M:1 Contrast Ratio - Don’t compromise quality for speed—the LG UltraGear OLED screen delivers a 1,500,000:1 contrast ratio for a deep, detailed quality picture and a lifelike gaming experience..
  • Anti-Glare Screen - Play with less distractions thanks to an anti-glare screen that minimizes light reflections and lets you concentrate on winning..
Check Stock

LCD Touch Panels Touchpanel Analog For DOGS102 (EA TOUCH102-1)

  • 2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
  • With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch)..
  • This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
  • On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
Check Stock

Acogedor 2.8 Inch TFT SPI Serial Port LCD Touch Panel Module ILI9341 240x320 5V/3.3V (without touch)

  • ?2.8 inch color screen, support 65K color display, and the display is colorful.
  • ?With PCB board (including power supply IC, touch IC, SD cardcage) compatible 5110 interface.
  • ?At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch).
  • ?This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution.
  • ?The module is equipped with voltage stabilized IC to support 3.2v /5V power supply.
Check Stock

Timex TX5800 Digital Photo Frame with Temperature, Alarm Clock and Calendar

  • Digital photo frame with temperature, alarm clock, calendar and Indiglo Back Light.
  • Photo display is 1.4 CSTM (128x128 dots, 65k color).
  • Supported formats: BMP, GIF, JPEG, TIF, PNG.
  • Read temperature in Celsius and Fahrenheit.
Check Stock

5 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V(Blue Display Color)

  • What will you get: there are 5 pieces OLED display module with blue display color, self-illuminated and no need backlight.
  • Power-saving display: the I2c oled display performs better than the traditional LCD display and with lower consumption sicne the IIC (I2C communications) simplifies connections.
  • Please note that these I2C OLED display module comes without pin headers.
  • More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
  • Good compatibility: this i2c oled display module is compatitable with Raspberry Pi 4B/3B+/3B/2B/Zero, compatitable with Arduino, also compatitable for ESP8266, ESP32, STM32, etc..
  • Product manual: as shown in the instructions.
Check Stock

LCD Display Module - 2.8 Inch TFT SPI Serial Port LCD Touch Panel Module ILI9341 240x320 5V/3.3V(带触摸最少9个IO驱动)

  • With PCB board (including power supply IC, touch IC, SD cardcage) compatible 5110 interface.
  • At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch).
  • This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution.
  • The module is equipped with voltage stabilized IC to support 3.2v /5V power supply.
  • 2.8 inch color screen, support 65K color display, and the display is colorful.
Check Stock

JM Set of 3 pcs Transparent 3D Floating Frame Display Holder/Box/Frames for Challenge Coins, AA Medallions, Antique, Jewelry,Gift, White, 2.75 x 2.75 x 0.75 Inches

  • What will you get: there are 5 pieces OLED display module with classic display color, self-illuminated and no need backlight.
  • Power-saving display: the I2C oled display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications) simplifies connections.
  • Please note that these I2C OLED display module comes without pin headers.
  • More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
  • Good compatibility: this i2c oled display module is compatible with Raspberry Pi 4B/3B+/3B/2B/Zero, compatible with Arduino, also compatible with ESP8266, ESP32, STM32, etc..
  • Product manual: as shown in the instructions.
Check Stock

Garmin eTrex 20x, Handheld GPS Navigator, Enhanced Memory and Resolution, 2.2-inch Color Display, Water Resistant

  • UPGRADED DISPLAY - Features a 2.2” 65K color sunglight readable display offering increased resolution (240 x 320 pixels).
  • LOAD MORE MAPS - Large 3.7 GB of internal memory and microSD card slot lets you load a variety of maps, including TOPO 24K, HuntView, BlueChart g2, City Navigator NT and BirdsEye Satellite Imagery (subscription required).
  • PRELOADED BASEMAP - Includes a worldwide basemap with shaded relief. Display size:1.4 x 1.7 inches.
  • KEEP YOUR FIX - With its high-sensitivity, WAAS-enabled GPS receiver, HotFix satellite prediction and GLONASS support, eTrex locates your position quickly and precisely and maintains its location even in heavy cover and deep canyons.
Check Stock

MakerFocus 2pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module White I2C OLED Screen Driver DC 3.3V~5V for Ar duino

  • ★ ★ Product Manual: Please get the link from the product description below.
  • 128x32 OLED display, no need backlight, self-illumination, Display Color: White. Plz note: These I2C OLED Display Modules come without pin headers..
  • The display performance is better than the traditional LCD display, also lower consumption.
  • I2C oled display, IIC (I2C communications) simplifies connections.
  • Use with Ar duino, ESP8266, ESP32, STM32, etc.
  • We have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation!.
Check Stock

DORHEA 10PCS 0.91 12832 IIC I2C OLED Display Module 0.91inch I2C 128x32 SSD1306 LCD Display Module White I2C OLED Screen Driver DC 3.3V/5V with 4 Pin Headers for Ardu ino

  • 0.91 inch OLED display, no need backlight, self-illumination, Display Color : White, Resolution: 128 x 32..
  • The I2c OLED display performance is better than the traditional LCD display, also lower consumption, high resolution OLED for any of your micro....
  • The 0.91 display performance is better than the traditional LCD display, it uses the very common I2C bus, and runs on the SSD1306 display driver..
  • 0.91 oled compatible with Ardu ino, ESP8266, ESP32, STM32, etc.
  • The 12832 display can run on 3.3v. It is legible, even with 4 lines of text. Highly recommended for projects that require some form of user interface..
Check Stock

5 Pieces I2C Display Module 0.91 Inch I2C OLED Display Module I2C OLED Screen Driver DC 3.3V~5V White Display Color

  • What will you get: there are 5 pieces OLED display module with classic display color, self-illuminated and no need backlight.
  • Power-saving display: the I2C oled display performs better than the traditional LCD display and with lower consumption the IIC (I2C communications)....
  • More details: use compatible with Arduino, ESP8266, ESP32, STM32, etc..
  • Good compatibility: this i2c oled display module is compatible with Raspberry Pi 4B/3B+/3B/2B/Zero, compatible with Arduino, also compatible with....
  • Product manual: as shown in the instructions.
Check Stock

PalmOne Tungsten T3 Handheld

  • Operating System - Microsoft Windows Mobile 6 ( Pocket PC ).
  • Display - 3.5" Brilliant TFT LCD 65k full-colors, 16-bit display QVGA, 240x320 resolution with touch screen (anti-glare).
  • Memory - 256MB Flash ROM and 64 MBBluetooth v2.0(EDR) / SIR 115.2kbps (max) / USB 1.1/ WiFi 802.11b+g.
  • Expansion Slot - 1 x SD slot (SDIO/SD/MMC ) up to 4GBIntegrated microphone and speakerFull duplex record and playback1 x 3.5mm earphone jack and MP3 stereo.
Check Stock

Virzen UHD OLED Portable Monitor 15.6 Inch HDR Touchscreen 4K 3840 x 2160 Display with 10000mah Battery 10bit 100% DCI-P3 External Screen for Laptop, PC, Phone, Camera, Consoles

  • ...able battery meets power supply requirements and supports reversed charging, providing additional power for your connected devices without the hassle of extra wires. This is all supported while still maintaining an ultra-light body weight of only 2.16lb..
  • [Compatible with multi devices, plug and play second portable display] There’s no need for any driver installation, you need only connect the display with the compatible port that can output a video / audio signal. The monitor works in secondary, mirror or span mode, as needed.
  • The monitor works great as a separate screen for a camera, laptop, PC, smartphone, switch, xbox, ps3/4/5, TV box and much more..
Check Stock