Categories

Best 6hp Outboard Motors

TFCFL 4 Stroke 6.0HP Electric Outboard Motor,Outboard Motor Boat Engine Water Cooling CDI System,Heavy Duty Inflatable Fishing Boat Engine 3.75KW 2500 R/MIN

  • 【2 STROKE 6 HP OUTBOARD MOTOR BOAT ENGINE】2 stroke 6HP power, Water cooling technology to improve the reliability of the whole machine. Superior engine water cooling system for improved engine performance Made of special high-strength aluminum alloy material with high hardness, strong durability, good rust and corrosion resistance..
  • 【SIZE & PREFORMANCE】Overall length 1040mm(40.9 in).
  • Full throttle operating range 5000-6000r/min.
  • Idling speed ( in neutral) 1000±100 r/min.Engine oil mixing ratio Fuel 50: Engine oil 1.
  • Spark plug 25.0Nm(18.4 ft-lb) (2.55 kgf-m).
  • Engine oil drain bolt 18.0Nm(13.3 ft-lb) (1.84 kgf-m)..
  • 【WIDE APPLICATION】Perfect match inflatable boats, fishing boats, sailboats, and small yachts.(The outboard motors are all installed on the stern straight plate and cannot be installed in other places).
  • 【WARM TIPS】Please add gear oil to the gears before use the motor and replace gear o....
Check Stock

Gekufa 18-7350 Fuel Pump Compatible with Johnson Evinrude Mallory Outboard Engine Motor 9.9 15HP Pre 1993 and older & 6 8 9.9 15HP 1992 and Older - Replace 397839 397274 395091 391638 9-35350

  • [Replaces Part Number] Johnson Evinrude 397839, 391638, 395091, 397274.
  • [Compatibility] Fits for Johnson & Evinrude 6hp, 8hp, 9.9hp, 15hp outboard motors from 1992 and Older.
  • [Premium Quality] Made of high quality material and easy to install..
  • [Perfectly Fit] Direct replacement for proper fit and works well on your vehicles..
  • [100% Satisfaction Guaranteed] The replacement part comes with 90 days warranty. Respond within 24 hours if you have any questions.
Check Stock

Newport Trolling Motor Transom Motor Mount - Kayaks - Freshwater and Saltwater - 1 Size

  • 3 HORSEPOWER: The Newport Transom Mount is a 3 horsepower maximum rated product that is designed specifically for small outboard motors and transom trolling mounted trolling motors. This product is made from high quality materials and is designed for durability and performance..
  • CORROSION RESISTANT: Saltwater and Freshwater compatible, the Newport Transom Mount is a salt water and freshwater compatible transom mount that is designed for use with electric trolling motors. This transom mount is made of durable Aluminum and features a quick-release 4- bolt mount for easy installation and removal..
  • FITS MOST KAYAKS: Widely used 3.75" x 4.75" bolt pattern This transom mount is widely used for its 3. 75 x 4. 75 bolt pattern. It fits most outboard motors and trolling motors and fits majority of Kayak models. The Newport Transom Mount is made of durable aluminum..
  • REMOVABLE AND REPLACEABLE POLYMER TRANSOM PLATES: The Newport Transom Mount is a removable and replaceable polymer transom plate that can be easily installed on any boat. The plate is designed to provide a strong and durable mounting surface for a variety of out....
Check Stock

46-42089A5 Water Pump Impeller Repair Kit Replacement for Mercury Mariner MerCruiser Force Sears Outboard 6 8 9.9 10 XR10 15 HP Boat Motor Parts Replacement 46-42089A4 42089A3

  • This water pump impeller repair kit for Mercury Mariner Force Sears Outboards Motors OEM p/n 46-42089A5 42089A 5. It is very important to check your....
  • Water pump rebuild kit replacement for Mercury Mariner Mercruiser 6hp 8hp 9.9hp 10hp XR10 15HP 2, 4 Stroke Non-BigFoot Magmum Matathon Sea Pro....
  • What is included: Neoprene Water Pump Impeller 47-420382, 42038-2, Wear Plate 42200, Gasket 27-19202 27-19204-3 12-19183 19643, Pump Base 46-420T5,....
  • Cross P/N reference: Mercury Mariner Service kit 42089A5, 42089A4, 42089A3. Compatible with the GLM Marine Outboards 12051 SEI Marine 96-261-01K .This....
  • To find the correct impeller kits for your boat motor, it is VERY IMPORTANT to check your outboard model or s/n before purchase. you can leave us....
Check Stock

Portable Boat Fuel Tank 12L 3 Gallon Marine Outboard Motor Fuel Tank w/Connector

  • This Outboard Fule tank is made from Strong UV Stabilised Plastic (polyethylene), won't rust, crack or chip..
  • It's light wieght compact and has a convient carry handle, easy to stow, safe and strong..
  • 12 Litre (3 Gallon) capacity most people call this a 12lt tank but its only 11.3LT Screw-on cap with breather vent..
  • Standard nozzle: outboard motor(above 6HP)interface from the back holes..
  • It's perfect for Small to Large Boats, Inflatables, Tinnies, Canoes and even Kayaks..
Check Stock

TFCFL 2 Stroke Boat Motor Heavy Duty 6 HP Outboard Motor Boat Engine With Air Cooling System,Inflatable Fishing Boat Engine ,Brushless Motor Fishing Boat Engine

  • 【6HP & 2-Strokes Outboard Boat Motor】6HP & 2-Strokes ,Controlled by the handle, which is operated by the clutch. The lightweight machine can use on boat weight of 100kg or less , load-bearing 4 people, but the speed is certainly not the same when 1 person or 4 persons on it . Customer who has high expectations on speed, please be noticed..
  • 【CDI Ignition System】Standard CDI ignition system for easy starting and improved performance, it can be partially tilted upwards to sail in shallow water, can work in most water depth conditions.Features 360 degree steering rotation for reverse without gear shifting..
  • 【Main Parameters】Overall length 49cm(19.3 in), Overall width 32cm(12.6 in), Overall height 106cm(41.8 in), Transom height 44CM(17.3 in). Short shaft: 40cm. Full throttle operating range 5000-6000r/min, Maximum output 4.4KW/6HP, Idling speed ( in neutral) 1000±100 r/min..
  • 【Advantages】Using 2 Stroke Power, 6HP boat motor: Air Cooling Technology To Improve The Reliability Of The Whole Machine.Convenient Use,Easy Operation And Convenient Maintenance: Travel Safer,More Reliable,More Corrosion Resistant,More Beautiful,More Durable,More Energy Efficient,More Environmentally Friendly..
  • 【Water Cooling System】Superior engine water cooling syste....
Check Stock

YaeMarine 2 Stroke Outboard Motor Bracket Kicker for Boat up to 25hp Auxilary Trolling Mount

  • Construction : All stainless stamped construction outboard motor bracket for 2-stroke motors, could bear up to 110 lbs.
  • Specifications : Motor pad - 7.9"(20.1cm) wide, 6.3"(16cm) and 8.15"(20.7cm) two side length, 1.09"(4.3cm) thick, stainless nylock nuts (metric).
  • Applications : Fits most style of 2-stroke outboard motors.
  • Easy to install : 5 vertical running position lock bars.
  • locking the safety knobs to keep the bracket in place.
  • holds the outboard motor up or lowers....
  • Note : please be careful of the sharp edge when you install.
  • Please feel free to contact us if you have any question about the product. We would try....
Check Stock

Ironwood Pacific HelmsMate Tiller Extension Handle U | Universal Joint Model | 37\-51\ Extendable

  • Full steering and throttle control while sitting away from your trolling or small outboard motor.
  • Fits gas and electric outboard boat trolling motors 15HP and under.
  • Anodized aluminum, corrosion resistant fittings and unbreakable nylon clamp are designed to last.
  • Designed to fill tiller handles on all electric and gas outboard motors 15 hp or under.
Check Stock

TUFFIOM Outboard Boat Motor Stand, Engine Carrier Cart Dolly for Storage, 315lbs Weight Capacity, w/Wheels (Black)

  • 【High-quality Materials】 The outboard boat motor stand carrier cart dolly is made of sturdy steel tubes and solid wood, which are scratch and wear resistant and not easily deformed. The surface of the steel tube stand is electroplated to prevent rust and corrosion, extending its service life.It is also fixed with high-quality screws to ensure a good and stable structure and a high load capacity..
  • 【High Load-bearing Capacity】 This outboard boat motor stand carrier cart dolly features a thickened pine hanging board with a loading capacity of up to 154.32lbs, which can withstand the weight of most outboard motors..
  • 【Good Stability】 It has a geometric triangular structure and two widened rear wheels, making the trolley more stable and less likely to tip over, so it is easier and safer to use.The simple construction of this trolley makes it very easy to install. It comes with all the necessary accessories in the package for convenient and time-saving installation..
  • 【Space Saving】The two support frames on the sides have been carefully designed with clasps so that you can fold this trolley quickly and without takin....
Check Stock

SUNGZE Mercury Propeller 7.8x8 for Outboard 2-Stroke 5HP 12 Tooth/Boat Outboard Propeller 7.8 * 8 for Tohatsu/Nissan Engine 4HP 5HP 6HP

  • Diameter(in.): 7.8", Pitch(in.): 8", Blades: 3, 12 Spline Tooth.
  • Fit Mercury/Mariner Outboard Engines Prop 5HP/Tohatsu Propeller Engine 4HP 5HP 6HP.
  • Fit Mercury Outboard Part Number: 48-812950A02.
  • Tohatsu:3R1-W64516-0 (IMPT: check OEM part number before purchase!!).
  • This propeller is after market product. Diameter and Pitch are identical to original OEM ones. We guarantee the performance and quality..
  • Free return is accepted, Please feel free to buy the propeller.
Check Stock

6HP 4 Stroke Outboard Motor Boat Engine Outboard Motor Marine Inflatable Fishing Boat Engine with CDI Water Air Cooling System

  • 【6HP 4 STROKE OUTBOARD MOTOR】Air Cooling Technology To Improve The Reliability Of The Whole Machine. Features 360 degree steering rotation for....
  • 【MAIN PARAMETER 】Model：single cylinder、air cool、four stroke、hand pull.
  • 【PRODUCT SPECIFICATIONS】Outboard model: spline drivehard shaft、spiral bevel gear.
  • Steering: vertical axis, counterclockwise.
  • 【HIGH PERFORMANCE】Start-In-Gear protection/clutch feature prohibits prop rotation while idling. Easy pull off engine cover with push button latch....
  • 【WIDE APPLICATION】Perfect match inflatable boats, fishing boats, sailboats, and small yachts.Performance More Superior,quick start,positions the....
Check Stock

Boat Propeller 7.8x8 for Mercury Outboard Motors 2-Stroke 5HP 48-812950A02 /Tohatsu/Nissan 4HP 5HP 6HP 3R1-W64516-0 3R1W645160M

  • For Mercury/Mariner Outboard Engines Prop 5HP/Tohatsu Propeller Engine 4HP 5HP 6HP.
  • Number of Spline: 12, Blades: 3, Diameter (in.): 7.8", Pitch (in.): 8".
  • For Mercury Outboard Part Number: 48-812950A02.
  • This propeller is after market product. Diameter and Pitch are identical to original OEM ones. We guarantee the performance and quality..
  • Service: Free return is accepted.Quality and performance are guaranteed..
Check Stock

6HP Outboard Motor 4-Stroke Boat Motor Kayak Motor Fishing Boat Motor Inflatable Boat Motor Engine Water Cooling System 6HP 4-Stroke Air-Cooling

  • 【6HP 4-Stroke Engine】The 6HP 4-Stroke engine provides all the power you need for motoring in your boat. The superior engine air cooling system....
  • 【Product Parameters】Max. Output: 6.0hp.
  • 【360° Steering】360 degree rotation, rotating in the opposite direction without changing speed. Allows you to reverse without shifting gears. It....
  • 【Transistor Non-contact Electronic Ignition】The ignition system of this motor is a transistor non-contact electronic ignition system. You can....
  • 【Inline Propeller Design】The propeller of this item adopts an inline design, with high-speed engine that can more effectively play the outboard....
Check Stock