Categories

Best 70 Ton Lifting Capacity

K Tool International 63103A 2 Ton Automotive Trolley Floor Jack for Garages, Repair Shops, and DIY, Portable, Compact, 4,000 lbs. Capacity, Hydraulic Lifting Range 5.125" - 13", Heavy Duty Steel, Red

  • [2 TON CAPACITY] - K tool International trolley jack rated to lift up to 2 tons or 4,000 lbs..
  • [LIFTING RANGE] - K Tool 2 ton trolley jack has a lifting range of 5-1/8" to 13". This trolley jack provides the opportunity for many automotive needs..
  • [BUILT-IN VALVE] - Valve prevents over-extension of hydraulic ram and jack use beyond rate capacity..
  • [DURABLE] - K Tool service jack is built for extra lifting and maneuverability for all load lifting needs. Heavy-duty steel construction provides stability and positioning..
  • [MANEUVERABILITY] - Swivel rear casters and saddle provide smooth maneuvering and positioning.
Check Stock

Industrial & Scientific 600-3000lbs x 8/15m Winch hand tool Crank Gear Winch Boat truck auto hand self-locking manual winch Hand lifting sling Industrial & Scientific (Color : 2500LBS)

  • 2 ton (4409 lbs.) pulling capacity, 1 ton (2204 lbs.) lifting capacity..
  • Warning: Not designed for overhead lifting..
Check Stock

BEETRO 3 Ton Electric Car Jack 12V Scissor Jack Lift with Electric Wrench, Electric Jack for Car Sedan SUV Tire Changing

  • RATED CAPACITY : The maximum load capacity of BEETRO car jack is up to 3 ton(6600 pounds), lifting height is 5.5 -16.54 inches. Two removable raised heads are respectively designed for vehicles of different heights, suitable for most vehicles under 3 ton, Sedan, SUV, MPV etc. NOTES: Never used the jack on sloped ground. Never use it on truck or over 3 ton vehicles. Start car engine before operation,ensure sufficient electricity..
  • TWO WAY POWER SUPPLY : This 12v jack is cigarette lighter or car battery powered, and comes with a 11.5 foot power cable, long enough to go through the 4 tires without changing the power source..
  • EASY TO USE : Electric scissor jack is simple to operate, just press 2 switches to lift or lower your car, get rid of laborious and tedious manual working. It just takes about 2 minutes to lift a car, greatly cut repairing time. Perfect for car's owners change tire in emergency, especially best choice for women..
  • HIGHER SECURITY: This 3 ton scissor jack adapts heavy-duty steel construction which features to strong bearing capacity and distortion resistance. It will automatically stop lifting when it r....
Check Stock

Portable Hydraulic Ram Welded Bottle Jack with Carrying Case, 2 Ton/ 5 Ton/ 8 Ton/ 10 Ton/ 20 Ton Capacity-Blue (5 TON)

  • 【CAPACITY】- Choose from 2 Ton/ 5 Ton/ 8 Ton/ 10 Ton/ 20 Ton load capacity. Max Pressure: 200PSI. It is powerful to be a jack tool for automotive repair and emergency..
  • 【INDEPENDENT CYLINDER】- Built-in two rugged wear-resistant steel rings, the piston rod and the inner bar are not in contact, so the friction of the inner bar can be reduced to the least, which makes it more durable..
  • 【RUGGED ROD & SPRING】- Rod features flexible adjustment of height, strong pressure resistance and corrosion resistance. The spring has compact structure, fast retraction and long service life..
  • 【SPLICING HANDLE】- Two handles that can be connected to each other are easy to storage and use. They are easy to use and have a lift valve to ensure reliable internal oil circuit..
  • 【WIDE APPLICATION】- For lifting farm vehicles, heavy-duty machinery, industrial equipment, military applications, and environments where the equipment receives heavier abuse..
Check Stock

Portable Hydraulic Ram Welded Bottle Jack with Carrying Case, 2 Ton/ 5 Ton/ 8 Ton/ 10 Ton/ 20 Ton Capacity-Blue (2 TON)

  • 【CAPACITY】- Choose from 2 Ton/ 5 Ton/ 8 Ton/ 10 Ton/ 20 Ton load capacity. Max Pressure: 200PSI. It is powerful to be a jack tool for automotive repair and emergency..
  • 【INDEPENDENT CYLINDER】- Built-in two rugged wear-resistant steel rings, the piston rod and the inner bar are not in contact, so the friction of the inner bar can be reduced to the least, which makes it more durable..
  • 【RUGGED ROD & SPRING】- Rod features flexible adjustment of height, strong pressure resistance and corrosion resistance. The spring has compact structure, fast retraction and long service life..
  • 【SPLICING HANDLE】- Two handles that can be connected to each other are easy to storage and use. They are easy to use and have a lift valve to ensure reliable internal oil circuit..
  • 【WIDE APPLICATION】- For lifting farm vehicles, heavy-duty machinery, industrial equipment, military applications, and environments where the equipment receives heavier abuse..
Check Stock

Portable Hydraulic Ram Welded Bottle Jack with Carrying Case, 2 Ton/ 5 Ton/ 8 Ton/ 10 Ton/ 20 Ton Capacity-Blue (10 TON)

  • 【CAPACITY】- Choose from 2 Ton/ 5 Ton/ 8 Ton/ 10 Ton/ 20 Ton load capacity. Max Pressure: 200PSI. It is powerful to be a jack tool for automotive repair and emergency..
  • 【INDEPENDENT CYLINDER】- Built-in two rugged wear-resistant steel rings, the piston rod and the inner bar are not in contact, so the friction of the inner bar can be reduced to the least, which makes it more durable..
  • 【RUGGED ROD & SPRING】- Rod features flexible adjustment of height, strong pressure resistance and corrosion resistance. The spring has compact structure, fast retraction and long service life..
  • 【SPLICING HANDLE】- Two handles that can be connected to each other are easy to storage and use. They are easy to use and have a lift valve to ensure reliable internal oil circuit..
  • 【WIDE APPLICATION】- For lifting farm vehicles, heavy-duty machinery, industrial equipment, military applications, and environments where the equipment receives heavier abuse..
Check Stock

K Tool International 50 Ton Blue Air Hydraulic Truck Jack HD KTI63198

  • [50-TON CAPACITY] - K tool International service jack rated to lift up to 50 tons or 100,000 lbs..
  • [LIFTING RANGE] - K Tool 50 ton jack has a lifting range from 11.4" to 21.25". Service Jack provides the opportunity for many automotive/truck needs..
  • [BUILT-IN BY-PASS] - K Tool truck jack includes a built-in by -pass device to protect hydraulic system from over pumping damage..
  • [LONG PUMP HANDLE] - Long pump handle with release knob. Works independently of handle position. Handle locks in both vertically at 45 degree angle and horizontally..
  • [NARROW WIDTH] - Truck jack narrow width allows jack to fit between tandem wheels..
Check Stock

Floor Jack,2 Ton Heavy Duty car jack,Lifting Range 5-1/8" to 13",Hydraulic Low Profile Trolley Service Floor Jack,4,000 lb Capacity,Blue(AA051)

  • Floor jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/8 and a maximum height of 13".
  • The 2ton floor jack jack equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability.
  • The floor jack has a large saddle surface area for better contact with the load being supported.
  • Heavy duty steel construction provides long term durability，Built-in safety valve provides overload protection.
  • Service jack is built for extra lifting and maneuverability for all load lifting needs. Heavy-duty steel construction provides stability and positioning..
Check Stock

Cat 4 Ton All-in-One Truck Jack, Bottle Jack and Stand in One, Car Lift Equipment for Repair - 240342

  • INNOVATIVE DESIGN: All in one truck jack is just a portable jack designed to not only lift but safely hold higher vehicles like trucks, SUVs, or offroad vehicles.
  • eliminates the need for extra jack stands.
  • will lift and hold both body on frame and unibody vehicles.
  • PATENTED: The genius of this jack's design is it allows both easy and safe lifting of higher vehicles while making holding them trouble free as well.
  • the auto safety lock and riser retaining pin hold vehicle at height, eliminates the need for additional jack stands.
  • LIFT RANGE: Jack has a lift range from 11 inches to 21 inches.
  • CAPACITY: Jack has a 4 ton (8,000 lbs) lifting and holding capacity.
  • TRUSTED BRAND: If you are a fan of the big yellow and black machines, you will love the Cat branded 4 Ton All-in-One Truck Jack.
Check Stock

AFF Heavy Duty 10 Ton Air Lift, 200-PSI, 12' Lift Travel, Diameter Rubber Tread Wheels, 3400A

  • Lift: Designed for lifting or lowering the entire front/rear of a vehicle, this model includes a heavy duty air valve that offers accurate lift control with a 12" lift travel.
  • Capacity: This model has a 10 ton capacity achieved at 200 PSI.
  • An air valve provides speed control when lifting or lowering a load.
  • Features: The removable “T” handle allows for easy storage with extension tubes that offer multiple lifting points and locking positions.
  • Large diameter rubber tread wheels allow for easy maneuverability and portability.
Check Stock

4 Wheel Rope Block And Tackle Pulley Hoist Tool Lift Lifting Pully Rigging Tool

  • 2 TON ROPE HOIST RUGGED 2.5 4 WHEEL PULLEY”.
  • AND CLIPS 65 FEET OF 5/16 ROPE LIFTING”.
  • SHIPS SAME DAY IF PAID FOR BY 4PM PST THANKS.
Check Stock

Stark USA 2 Ton Engine Hoist Stand Cherry Picker Ship Crane Folding Lift Garage Workshop Auto Repair Foldable Stand, Red

  • Useful Lift Equipment - The hydraulic engine hoist is the perfect choice for everyday vertical lifting & support in automotive and ag repair shops. It also excels in situations where a combination of sleek design & superior strength is required. From engines to differentials to transmissions and other heavy loads, this hoist gets the job done..
  • 360' Swiveling Wheels - There are six durable wheels on the lift, which can be rolled around & swung in any direction. It provides maximum maneuverability & it is a good choice for moving heavy parts.
  • Heavy Gauge Structural Steel - The engine hoist is made of heavy duty structural steel, durable & sturdy to keep its shape and also very safe when use. With the solid steel construction, it has 4000 lb closed boom capacity & 1000 lb extended boom capacity.
  • Powder Coated Finish - It is painted with glossy corrosion-resistant & anti-rust paint, which can be used both indoors & outdoors. With this feature, it is also very easy to clean.
  • Adjustable Positions & Easy Storage - 4 adjustable positions for your different work needs: 0.5Ton , 1-Ton, 1.5-Ton and 2-Ton. Equipped with 8-ton ram hydraulic cylinder, it can be used for long time. The foldable design is good if you are looking for an easy cranes to store.
Check Stock

Omega Pro Hydraulic Long Ram Jack - 4 Ton Capacity with Flat Base for Auto Garage Shop, Green (OP400S)

  • 4 TON LONG LASTING - Omega Pro OP400S Long Ram Jack features 4 Ton lifting capacity and fabricated from hard-cast steel with heat-treated critical stress areas for long lasting..
  • VERSITILE – Omega Pro Long Jack has the heat-treated chrome cylinder for added strength and give you the ability to Lift from 19 7/8" to 35 1/4" to allow you to use for almost anything needing to be raised..
  • DURABLE PERFORMANCE - Hydraulic system is protected from internal damage by a patented by-pass mechanism. Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance..
  • EASY TO USE – Handle includes a rubber grip & jack uses a large hydraulic release handle. Perfect for lifting (not supporting) auto engines, trailers, RV, patios, decks, ATVs and more..
  • WARRANTY - 4 ton long jack features a wide rugged base (5-18" x 4 1/2") to allow you with the ability to easily position and provide the stability and strength. It covers with 1 year manufacture warranty from the date of the purchase..
Check Stock