Categories

Best 8 Bearing Wheel

Trailer Bearing Kit for #84 Spindle, Redline BK2-100

  • 2pcs l68149 / l68111 wheel bearing bore size: 34.987mm.
  • 2pcs l44649 2PCS l44610 trailer wheel bearing bore size: 26.987mm.
  • 2pcs double lip grease seals 10-19 (171255TB).
  • This trailer wheel set can be used for r-pod trailers, Rockwood premier 2576 pop-up camper trailer wheel bearings, yacht trailers.
Check Stock

YongXuan 4 Wheels Wear-Resistant Mute Luggage Suitcase Replacement Wheels Rubber Swivel Caster Wheels Repair Kits 1.57x0.71in 40mm × 18mm

  • Use rubber material to Integrally molded, mute, wear, Matched double bearings, flexible rotation, can also withstand a lot of weight..
  • Wheel size: Outside diameter is 1.57 in (40mm), Wheel width is 0.71in (18mm), Wheel bearing width: 0.83 in (21mm), Center bearing internal diameter is....
  • Package comes with 1.18in (30mm) and 1.42in (35mm) axles bolt and washers to meet different needs of 1.18in to 1.42in..
  • Package including: 4 x 1.57in (40mm) Wheels, 4 x 1.18in (30mm) Axles, 4 x 1.42in (35mm) Axles, 8 x Axles screws, 8 x Washers, 2 x Wrenches..
  • Please always check the size table for the wheel dimension, bearing dimension and axle dimension before make any order..
Check Stock

RHKING 4 Wheel Trolley Assembly Roller Trolley 2Pcs Silent M10 Bolt for use with 1-5/8\ Wide and All 1-5/8\ or Taller Strut Channel

  • ✅ Using Simple: Wheel Trolley For use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel, M10 (3/8inch) Bolt in the middle, 80mm (3.15inch) in length,Design Load in 770 pound..
  • ✅ High strength:The pin shaft in the strut channel trolley bearing is made of solid alloy steel, which ensures the high strength of the Wheel trolley.Intermediate support of solid steel, high strength, impact resistance.Galvanized Zinc, rust protection.
  • ✅ Operate Steadily: Wheel Trolley Standard deep groove ball bearing installation, is very smooth no noise to it when used.Bearing welding positioning, to ensure the stability of the work..
  • ✅ Can used upside down: 3 nuts are prepared in the accessory,so that you can use the dollies upside down..
  • ✅Apply: For use with 1-5/8" Wide and All 1-5/8" or Taller Strut Channel.
Check Stock

Kaytee Comfort Wheel Giant 12 Inches

  • Niteangel 8.6-Inch Acrylic Hamster Wheel - Consists of a diameter of the 8.6-inch running drum & a wide standing base, the running track of the hamster wheel is around 2.7-inch width, it's recommended for dwarf hamsters, tiny gerbils, mice, or other small-size pets.
  • Silent Dual-Bearing Exercise Wheel - High-quality dual-bearing mechanism design brings them a noiseless running wheel. Hamsters love hamster wheels due to their nature, an ideal hamster exercise wheel encourages them to practice & keep the body's fit, enriches their activity at night & let them enjoy endless running fun. Also brings hamster owner a quiet & premium sleep.
  • Comfort & Adjustable Height design- 8.6 inches wide running drum offers most of the dwarf hamsters a comfort & flat running pose without bendy back. The height of the hamster wheel drum is variable, you can adjust it to fit your individual needs and wishes depending on the species of an animal cared for and the height of the bedding used.
  • Safety & Easy to Use - Comes with a big & wide standing base, it's available to put on a platform or lid of Niteangel Multi-chamber maze house, offers your hamster the simple access to the hamster wheel and start to walk & running, also the running track is continuous without cracks or tr....
Check Stock

Front Wheel Hub Bearing Assembly - Compatible with Chevy, GMC & Hummer - 4WD Silverado 1500, Classic, Suburban, Sierra 1500 HD, 2500 HD, Yukon XL, H2 - Replaces 515058,15042868, 15104582, 15112411

  • Replacement Wheel Bearing Hub Assembly - With ABS Speed Sensor Cable - is a crucial part of the drivetrain as it enables the wheels and tires to rotate smoothly without friction. Wheel hub bearing problems can easily be identified by loud noises from the wheel area, loose steering or unwanted movement, vibration and uneven tire wear..
  • Compatible Replacement for Chevrolet, GMC & Hummer Vehicles With 4 Wheel Drive - 2002 - 2006 Avalanche 2500 | 2001 - 2006 Silverado 1500, 1500 HD | 2007 Silverado 1500 HD Classic | 1999 - 2004 Silverado 2500 | 2004 - 2006 Silverado 3500 | 2001 - 2006 Sierra 1500 | 2007 Sierra 1500 Classic | 2007 Sierra 3500 Classic | 2000 - 2006 Yukon XL 2500 | & more. See below for the full vehicle list..
  • Replaces Part# 515058,15042868, 15104582, 15112411, 15225770, 15719015, 89059059, SP580310 commonly found on popular trucks and SUVs with 4WD or 4x4 such as the Silverado 2500 HD, Silverado 2500 HD Classic, Sierra 3500, Sierra 3500 Classic, Yukon XL 2500, H2 including year models 99, 00, 01, 02, 03, 04, 05, 06, 07..
  • OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct ....
Check Stock

Lapp wheels 16x6.50-8 Wheel and Tire, Flat Free,1\ Axle Bearing ,3\ Hub

  • Wheel size, 16x6.50-8 Turf Tire , 3"Wide Offset Hub, 1" Axle Bearing.
  • This replacement wheel is rated at a 550lb weight capacity, making it an extremely tough and durable product..
  • Ideal uses for this pneumatic wheel include ATV Trailors ,Lawn Mowers, and various utility carts..
  • Please note: Check your existing tire size, hub and bearing size to ensure that this wheel is a proper fit..
Check Stock

Bont FX1 Roller Skate Wheels with 688 Mini Bearings - Derby and Indoor Speed Quad Skating - Pack of 8 with Bearings

  • The Bont FX1 roller skate wheel is an ultra-lightweight, ultra-high-performance roller skate wheel. With super high rebound urethane combined with a unique mini bearing hub for fast acceleration and quick laterals.
  • The Bont FX1 wheel is great for roller derby or indoor rink skating. It is one of the only wheels on the market that uses the smaller 688 or 167 bearings rather than the traditional 608 skate bearing..
  • The mini roller skate bearing saves 12 grams per bearing and a whopping 192 grams (6.8oz) on a set of skates. That is a pretty huge weight saving. The mini bearings also spool up faster than 608 bearings getting you up to speed sooner for greater acceleration.
  • The 688 mini roller skate bearing has an exceptionally fine polished bearing track surface and incredibly precise balls. The lightweight plastic cages allow for lower rolling resistance.
  • Standard 60mm diameter by 38mm wide with 92A hardness. Comes in a set of 8 with 688 bearings.
Check Stock

Flat Free Wheelbarrow Tire 4.00-6 with 3/4 & 5/8 Wheel Bearing, 3-6" Hub 13 inch Solid Rubber Tire Replacement Wheelbarrow Wheel 400-6 for Wheel Barrel Yard Cart Garden Wagon

  • 【3/4 & 5/8 Bearing Replacement】The 13 inch solid wheel comes with 3/4 ball bearing. In addition, the flat free wheelbarrow tire equipped two 5/8 replacement ball bearing, in case the solid wheelbarrow tire can't fit your axle..
  • 【Hub Length 3-6 inch】 Axle Shaft: 3", comes with additional plastic spacers for extendable hub length to 6". Please measure and make sure your original 4.00-6 tire and wheel. The 4.00-6 tire flat free is suitable for backyard wheel barrows(Mostly 6 Cu.ft), trailer dolly, riding lawn mower cart, dump cart, pressure washer, yard wagon, generator, snowblower, etc..
  • 【No Flat Anymore】 Made of high-quality solid rubber 400-6 13 inch tire will never puncture or leak, and same as pneumatic wheelbarrow tires, featured performance bounce, feel, cushioning, won't be affected by UV rays when left exposed to the sun..
  • 【Exquisite Tread Pattern for All-Terrain】 The wheelbarrow tires 4.00-6 designed with attractive color, which will always remind you it's the way for gardening! Heavy duty wheelbarrow tire can easily hauling firewood, gardening material or catching up on y....
Check Stock

OEMTOOLS 37342 Master Wheel Hub and Bearing Remover and Installer Kit Back and Front Wheel Bearing Puller Kit Back and Front Wheel Hub Puller Easy to Use

  • NO SHOP PRESS NEEDED: The OEMTOOLS 37342 Master Wheel Hub and Bearing Remover and Installer Kit saves time removing even seized-up wheel hub and....
  • FOR PROFESSIONAL AND DIY MECHANICS: This wheel bearing puller/installer is one of the only tools for servicing front and rear wheel hubs and bearing....
  • UNIVERSAL APPLICATION: This wheel bearing removal tool features all the adapters needed to service a number of foreign and domestic vehicles, remove....
  • SLIDE-HAMMER-FREE REMOVAL: This wheel bearing tool and hub press makes it simple to remove and install wheel hub and bearing assemblies as well as....
  • WHEEL HUB PULLER KIT INCLUDES: Hub removal tool, Front wheel bearing adapters, Pusher Washers, Receiver Sleeves, Nut-Bolt, and Heavy Duty Bearing.
Check Stock

Magline 101020 10\ Diameter Foam Filled Pneumatic Wheel with Semi Precision Bearing

  • This 13.6" pneumatic wheel features a 4.00-6 wheel size and ribbed 4 ply tread pattern, great for on-road traction in both wet and dry conditions..
  • Options include your choice of a 3" centered, 3.25" off-centered, or 4" off-centered hub, as well as a 5/8" or 3/4" bearing..
  • Uses for this pneumatic replacement wheel include wagons, gorilla carts, garden carts, wood chippers, wheelbarrows, and much more..
  • With an impressive 450lb weight capacity, this wheel is built to handle any heavy load or commercial job you throw at it..
  • Important note: Check your existing tire sidewall for tire, hub and bearing size to ensure that this wheel is a proper fit..
Check Stock

QEP 21123Q 7/8' Premium Tile Cutter Replacement Scoring Wheel with Ball Bearings

  • For cutting floor and wall tile with score and snap Manual tile Cutters.
  • Titanium-coated Tungsten Carbide for accurate and durable cutting.
  • Replacing the scoring wheel will help maintain the tile Cutter optimal cutting performance.
  • Compatible with QEP tile Cutter models 10500, 10600br, 10800, and most Cutters using a 7/8 in. Ball bearing scoring wheel.
Check Stock

OEM TOOLS 27213 Master Wheel Hub & Bearing Remover & Installer Kit Back & Front Wheel Bearing Puller Kit Back & Front Wheel Hub Puller Easy to Use

  • NO SHOP PRESS NEEDED: Remove the need for a shop press with our wheel hub bearing press tool.
  • Save time removing even seized-up wheel hub and bearing....
  • FOR PRO AND DIY MECHANICS: This wheel bearing puller/installer is one of the only tools for servicing front and rear wheel hubs and bearing on German....
  • TIME-SAVING BEARING TOOL: No need to remove the strut assembly or knuckle to remove/install the hub and bearing.
  • VARIETY OF ADAPTERS: Service your vehicles easily with our rear and front wheel bearing removal kit.
  • This wheel bearing removal tool features all the....
  • DURABLE STEEL CONSTRUCTION: Our rear and front wheel drive bearing adapter kit's steel design holds up to the torque required to remove hubs and....
Check Stock

ECCPP New Front Wheel Hub Bearing Assembly 515003 fit for Ford Explorer (Sport Trac) Ranger, Mercury Mountaineer, Mazda B3000 B4000 4WD w/ABS 5 Lug 3 Flange Bolt 2pcs

  • COMPATIBLE VEHICLES - wheel hub bearing assembly for 1995-2001 Ford Explorer front wheel hub,2001-2005 Ford Explorer Sport Trac hub bearing,2000-2009 Ford Ranger front wheel bearing, 2001-2002 Mazda B3000 front bearing,2000-2009 Mazda B4000 bearing assembly,1997-2001 Mercury Mountaineer hub assembly.
  • FEATURES - ECCPP'S wheel hub bearing assembly fits for the front location, 5 Lugs with ABS, 3 Flange Bolt, replace OE 515003.
  • MAIN FUNCTION - Hub bearings can fix the tire and support the gravity of the whole body, provides precise guidance for the rotation of the hub. wheel hub bearing enables the wheels and attached components to rotate smoothly and keeps the wheel attached to the car. High quality wheel hub assembly make you enjoy your vehicle in a safe and smooth.
  • PREMIUM FEATURES - ECCPP wheel bearing assemblies manufactured by high-quality materials for ensuring precisely matches, durability, reliability and premium performance. The high-quality seal design provides superior anti-pollution protection, ensuring that the hub bearings are clean, long lasting and minimizing noise and vibration. Wheel bolts with protectiv....
Check Stock