Categories

Best 8 Bit 16 Bit

TEKTON 1/4 Inch Drive Hex, Torx, Phillips, Slotted, Square Bit Socket Set (42-Piece) | SHB90301

  • Includes 4-pc. 1/4 in. drive slotted bit sockets: 1/8, 3/16, 1/4, 5/16 in..
  • 4-pc. 1/4 in. drive Phillips bit sockets: #0, #1, #2, #3.
  • 10-pc. 1/4 in. drive inch hex bit sockets: 5/64, 3/32, 7/64, 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16 in..
  • 10-pc. 1/4 in. drive metric hex bit sockets: 2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 7, 8 mm.
  • 10-pc. 1/4 in. drive Torx bit sockets: T6, T7, T8, T9, T10, T15, T20, T25, T27, T30.
  • 4-pc. 1/4 in. drive square recess bit sockets: S0, S1, S2, S3.
  • S2 steel bit is press-fit into the socket for a straight, permanent connection that can't loosen over time.
  • Bits tips are machined to precise tolerances for strong engagement with fastener heads.
  • Large, clear die-stamped size marking is easy to read and can’t wear off.
  • Four detent grooves provide a secure connection with the drive tool.
Check Stock

NEIKO 10197A Step Drill Bit Set 5 Pc Step Bit for Metal 50 SAE Sizes Total 1/8” – 1-3/8” SAE Titanium High Speed Steel Unibit Stepper Cone Drill Bit Two Flute Step Down Bits Step Up Drill Bits

  • HSS STEP BIT: Classic step drill bit set constructed of high-speed steel for drilling holes in plastic, aluminum, copper, stainless steel, and many other types of sheet metal. Also doubles as a hole expander..
  • TWO FLUTE & TRI SHANK: Two-flute design deburrs during drilling, clearing chips faster and allowing particles to escape for clean cut holes. Each step drill bit features a tri-flatted shank for a secure fit into power tool chucks, eliminating slip..
  • MULTIPLE HOLE DRILL BIT: This versatile unibit step drill bit cone bit can replace 50 individual drill bits for metal with just 5 pieces in one box. Drill a range of different sizes and holes with a single bit without needing to change between bits..
  • STEP DRILL BIT SET INCLUDES: Four multipurpose metal dill bit in 1/4-inch shank and 3/8-inch shank and a red blow mold carrying case for easy convenience and storage in your car, garage or shop..
  • 50 SIZES IN 1: 5 stepper bits included. 1 x 6 step bit (1/4” shank.
  • 3/16” - 1/2”), 1 x 13 step bit (1/4” shank.
  • 1/8” – 1/2"), 1 x 9 step bit (3/8” shank.
  • 1/4" to 3/4"), 1 x 10 step bit (3/8” shank.
  • 1/4” – 1-3/8”), and 1 x 12 step bit (3/8” shank.
Check Stock

Stalwart - RBS024 Router Bit Set- 24 Piece Kit with ¼” Shank and Wood Storage Case By (Woodworking Tools for Home Improvement and DIY) Wood

  • DURABLE CONSTRUCTION – Stalwart’s carbide tipped router bits are built to last and are constructed using high quality materials. Along with the sturdy wooden case, this durable router bit set will allow you to complete all your projects with confidence..
  • MULTIFUNCTIONAL SET -  With 24 included pieces, this kit is great for multipurpose uses. It is perfect for woodworking, edging, trimming, grooving, veining wood projects, and ideal for carpenters and hobbyists of all experience levels. This set also includes an allen wrench for removing bearings..
  • EASY TO STORE- The included wooden case is sturdy and makes storing the high-quality router bits convenient while in-between jobs or DIY home improvement projects. The case also helps protect the bits while traveling to work on the go or remote site locations.
  • SET INCLUDES- 1/2 mortising bit, 1/2 combination bevel bit, 3/8 dovetail bit, 1/2 dovetail bit, 1/2 90 degree V-groove bit, 3/8 round nose bit, 1/2 round nose bit, 3/8 trimming bit, 1/4 panel pilot bit, 1/4 straight bit, 3/8 straight bit, 1/2 straight bit, 3/4 straight bit, 1/2 flush trim bit, 1/8 radius round over bit, 3/16 radius round over bit, 1/4 radius round over bit, 3/8 radius round over bit, 1/4 cove bit, 3/8 cove bit, 1/2 45 degree chamf....
Check Stock

Yobo FC 2 Slim Game Top Loader Console System for NES & SNES & Super Famicom Games BLACK [video game] …

  • Premium 3-In-1 FC Twin Retro Gaming System for NES + SNES + SFC Classic Games. Awesome retro gaming system for both 8-bit Nintendo games and 16-bit....
  • Playing Nintendo games, original 16-Bit SNES games and Super Famicom games through one same system. Works with most of the original SNES 16-bit and....
  • Supports classic NES and SNES controllers. Reinforced cartridge doors for both 8-bit NES and 16-bit SNES slots..
  • 2 wired controllers included. Its composite RCA A/V output provides brighter video with crisp sound..
  • Works with original Super Nintendo controllers and accessories but not working with NES Accessories..
Check Stock

6 pcs Step Drill Bit Set HSS Unibit Step Drill Bit and Automatic Center Punch Double Cutting Blades Hex Shank Step Bits for Metal with Aluminum Case

  • 【Double cutting blades】 Our step drill bit features a double cutting blades design, provides a smoother cut with rapid chip evacuation, making it easier to dislodge particles from the material. The 118° tip design enhances cutting speed and increases wear resistance while preventing tool walking..
  • 【HSS】 The step drill bit set is made of high speed steel, wear resistant and corrosion resistant to extend the life of the step bit..
  • 【Automatic center punch】 The carbide tip makes the center punch stronger. Knurling design on the surface makes it easy to prevent slippage..
  • 【What you get】 Our unibit step drill bit set includes 5 standard drill bits and an automatic center punch that can be used to machine 50 diameters of holes for metal, wood, plastic sheet and other materials, greatly increasing work efficiency. Our set includes 1 x 6 step bit (1/4" shank.
  • 3/16" - 1/2"), 1 x 13 step bit (1/4" shank.
  • 1/8" - 1/2"), 1 x 10 step bit (3/8" shank.
  • 1/4" - 1-3/8"), 1 x 12 step bit (3/8" shank.
  • 3/16" - 7/8"), and 1 x 9 step bit (3/8" shank.
  • 【Safe storage】 The step drill bit set comes with a custom aluminum case, sturdy and durable, easy to store and carry..
Check Stock

SATA 60-Piece 3/8 Inch Drive Standard and Deep Socket and Bit Socket Set with 72T Ratchet, Metric - ST09004U-02

  • [VERSATILE SET] 18 - 3/8" 6pt Metric Sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24 mm, 11 - 3/8" 6pt Metric Deep Sockets 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm, 3 - 3/8" DR Bit socket FD 5.5, 6.5, 8mm.
  • PH #3, 7 - 3/8" DR Bit socket Hex 3, 4, 5, 6, 7, 8, 10 mm, 9 - 3/8" DR Bit Socket Torx T10, T15, T20, T25, T30, T40, T45, T50, T55, 5 Accessories -2 - 3/8" - Spark plug socket 16mm.
  • 21mm, 3/8" - Universal joint, 3/8" Quick Release Ratchet, 1/2" F x 3/8" M 3-Way Adapter.
  • [MULTI-FUNCTIONAL] 24 Bit Sockets in 4 different types to cover many applications.
  • [EASE OF USE] Low profile quick released ratchet requires as little as 5° of swing arc to move a fastener.
  • [PREVENT FASTENER DAMAGE] Sockets Feature Off-Corner Loading to Reduce Fastener Rounding.
  • [ACCESS] Universal Joint for Better Access to Hard to Reach Fasteners.
Check Stock

NEIKO 10169A Step Drill Bit Set and Automatic Center Punch | 5 Piece, 41 SAE Sizes Total, 1/8” – 1-3/8” | Titanium High Speed Steel Unibit, Stepper Cone Drill Bit | Two Flute Step Down Bits

  • HSS COBALT STEP BIT: Classic stepdrill bit constructed of high-speed steel with titanium coating for drilling holes in plastic, aluminum, copper, stainless steel, and many other types of sheet metal. Also doubles as a hole expander..
  • TWO FLUTE & TRI SHANK: Two-flute design deburrs during drilling, clearing chips faster and allowing particles to escape for clean cut holes. Each step drill bit features a tri-flatted shank for a secure fit into power tool chucks, eliminating slip..
  • SPRING LOADED CENTER PUNCH: Our 5-inch automatic spring punch tool is a great tool for working with materials like wood, plastic, metal, and leather. Centering tool is spring loaded with an adjustable cap that accommodates any project..
  • INCLUDES: Four multipurpose dill bit in 1/4-inch shank and 3/8-inch shank with automotive center punch and a red blow mold carrying case for easy convince and storage..
  • MULTIPLE HOLE DRILL BIT: 4 stepper bits included. 1 x 6 step bit (1/4” shank.
  • 3/16” - 1/2”), 1 x 13 step bit (1/4” shank.
  • 1/8” – 1/2"), 1 x 10 step bit (3/8” shank.
  • 1/4” – 1-3/8”), and 1 x 12 step bit (3/8” shank.
Check Stock

Klein Tools 80027 Screwdriver Set, 11-in-1 Multi-bit Screwdriver, 6-in-1 Stubby Screwdriver, Phillips, Slotted, Square, Torx Bits, 2-Piece

  • Klein Tools Multi-Bit Screwdriver Tool Kit includes the 11-in-1 multi-bit screwdriver / nut driver (Cat. No. 32500) , and the 6-in-1 multi-bit stubby screwdriver / nut driver (Cat. No. 32561).
  • 11-in-1 multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • 11-in-1 includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • 6-in-1 multi-bit stubby screwdriver / nut driver with compact interchangeable shaft holds 4 universal tips and converts to 2 nut driver sizes.
  • 6-in-1 includes non-magnetic nut driver sizes 1/4-Inch (6 mm) and 5/16-Inch (8 mm) and Screwdriver sizes #1 and #2 Phillips, 3/16-Inch (5 mm) and 1/4-Inch (6 mm) slotted.
  • The compact design of the multi-bit stubby features standard 1-1/4-Inch (32 mm) shaft allowing easy access to tight work spaces.
  • Cushion-Grip handle provide greater torque and comfort.
Check Stock

OXMUL Step Drill Bits for Metal, 3/16 to 7/8, M2 HSS, Duty for Stainless Steel, Mild Steel, Hard Metal, Aluminum, Wood, Copper, PVC, 12-Steps. 2-Spiral-Flute. #201

  • [M2 HSS Coated] Made of M2-Coated HSS, this stepped Drill Bit have 5X Longer Life of Regular Drill Bit. This Step Bit drill 2X Faster for Stainless Steel, Hard Metal, Mild Steel, Galvanized Steel, Aluminum,Iron, Wood Plate, PVC and Copper. If you want to drill faster and many holes on metal, then please choose this step drill bit.
  • [Duty for Stainless Steel] A test. Drill in 1.3mm thick Stainless Steel square pipe. This Step Drill bit successfully drilled 12 holes. But another Titanium Step Drill only drilled 1 holes, then blunt.
  • [12 Steps & 2-Spiral Flute] Drills 12 different hole sizes, from 3/16", 1/4", 5/16", 3/8", 7/16",1/2", 9/16", 5/8", 11/16", 3/4" 13/16" to 7/8". 2-Spiral Flute:Clears Chips faster.
  • [118° Split Point Tip] Split Point tip prevents "walking," gets fast starts, and eliminates the need for pilot/starting hole.
  • [3/8" Tri-Flatted Shank] Fits into power tools chuck securely and eliminates slip.
Check Stock

Magnetic Hex Nut Driver Kit, YSJOYTOOL 33-Piece Power Nut Driver Bit Set for Impact Drill with Drill Bit Extension & Adapter, 1/4" Quick-Change Hex Shank | SAE & Metric | Cr-V Steel

  • Magnetic Power Nuts Driver Drill Bit Tools Set.
  • METRIC: 6mm, 7mm, 8mm, 10mm, 11mm, 12mm, 13mm, 14mm..
  • SAE: 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16"..
  • Drill Bit Adapter: 1/4″, 3/8″, 1/2″ & Drill Bit Extension: 60mm, 100mm, 150mm & Mni Ratchet Wrench.
Check Stock

DCT Brass Router Template Guides Bushing 10-Piece Set & Black Carrying Case - Porter-Cable Guide Bushings 5/16 to 1in

  • PERFECTLY MATCHED MULTIPLES: The DCT Brass Router Template Guides Bushing 8-Piece Set & 2 BONUS Lock Nuts – Porter-Cable Guide Bushings 5/16” to 1” Inch includes a wide range of porter cable style bushing sizes designed to allow full flexibility between router bit cutter and various templates.
  • COMMON SIZES: Standard bushings fit all routers with a 1-3/16-inch or 1-1/4-inch base plate (fits as long as the opening at the base of the router is 1-3/16-inches).
  • Fits 1/4-inch and thinner template material.
  • Each of the 8 guides have the following outside and inside diameters (OD/ID) – 5/16-inch OD 1/4-inch ID.
  • IMPROVED CONSTRUCTION: Constructed from solid brass to resist vibrating loose and resist water and moisture.
  • When inferior steel bushings touch a rotating router bit (i.e. tapered dovetail bit), sparks fly and the router bit will likely be ruined.
  • These solid brass bushings will prevent damage to the bit and the bushings themselves.
  • EASY STORAGE: Heavy-duty 8.5” x 2” x 6.5” (21.6cm x 5.1cm x 16.5cm) plastic blow-molded....
Check Stock

NEIKO 10181A Step Drill Bit Set 3 Piece Spiral Grooved for Faster Drilling Step Bits for Stainless Steel Metal Wood Plastic Unibit Cone Drill Bits with 31 Step Sizes Total

  • PREMIUM STEP BIT: Each unibit is constructed of industrial high-speed steel with a titanium nitride coating for durability and strength to punch and drill clean holes in materials like plastic, aluminum, wood, copper, stainless steel, and other types of sheet metal..
  • STEP DRILL BIT FOR METAL: With a split point tip that accelerates cutting speed while preventing angled walking away from center line of bore, drilling holes in metal is fast, efficient, and clean..
  • SPIRAL DESIGN: The two-flute spiral grooved design deburrs chip, dust and debris for clearance and smooth cutting. With 31 step sizes, each hole made with these step bits will be precise..
  • QUICK-CHANGE: The 1/4-inch hex shank makes for easy, convenient, and quick stepper bit switches and is compatible with impact ready power tools..
  • INCLUDES: Each bit set comes with 3 drill bits of a combined 31 sizes to add to your drilling arsenal: 13 step drill (1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 13/32, 7/16, 15/32, 1/2-inch) 6 step drill (3/16, 1/4, 5/16, 3/8, 7/16, 1/2-inch) and 12 step drill (3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8-inch)..
Check Stock

Powerbuilt 12 Volt Lug Nut Impact Wrench 2 Sockets, Cigarette Lighter Plug with Carry Case, LED Light for Night - 240067

  • ⚙️⚙️⚙️Drill bit is made of cobalt, nut and screw extractor kit is made of high-hardness chromium-molybdenum steel material, and the reverse spiral groove is designed to buckle downward to provide maximum grip..
  • The extractor kit is a 3-in-1 screw & nut removal kit and drill bit kit. Whether it‘s for car maintenance or daily use, it can provide you with great convenience..
  • Nut extractor Size: 1/4 inch, 5/16 inch (8 mm), 3/8 inch, 10 mm, 7/16 inch (11 mm), 12 mm, 1/2 inch, 13 mm, 9/16 inch (14 mm), 5/8 inch (16 mm), 17 mm, 11/16 inch, 3/4 inch (19 mm), included 3/8" to 1/4 "hex Impact adapter..
  • ️️️Screw extractor and drill bit kit Easy out rusty or damaged screws. Screw extractor kit:1-6#, Drill bit kit: 3/32", 1/8", 5/32", 1/4", 9/32", 3/8", each precision tool has a clear mark..
  • XEWEA promises that customers can enjoy our friendly customer service (just send us an email via Amazon), and a free warranty within 90 days. If you have any questions, please contact us..
Check Stock