TP-Link 24 Port Gigabit PoE Switch; 24 PoE+ Ports @384W, w/4 SFP slots; L2 Managed; Limited Lifetime Protection; Support L2/L3/L4 QoS, IGMP and LAG; IPv6 and Static Routing (T2600G-28MPS)
- 24× PoE+ (802. 3af/at) ports providing up to 30W per port, total PoE budget 384W and useful PoE power management Features.
- L2+ feature——Static Routing, helps route internal traffic for more efficient use of network resources.
- IP-MAC-Port-VID Binding, ACL, Port Security, Do's Defend, Storm control, DHCP Snooping, 802. 1X Authentication and Radius provide you robust security strategies.
- L2/L3/L4 Qu's and IGMP snooping optimize voice and video application.
- IPv6 support with dual IPv4/IPv6 stack, MLD snooping, IPv6 neighbor discovery.
Check StockPlatinum Tools TCB360K1 Cable Prowler Cable Tester, Cable Verifier, PoE Detector, TDR, PRO Test Kit
- Tests CAT3/5e/6/6a ethernet cable configuration and verifies connectivity while conducting tests for opens, shorts, miswires, split pairs, and reverses.
- Supports up to 8 testing and ID remotes for network and telephone cables and up to 20 network and coax ID-only mapping remotes.
- Detects presence of PoE and class of PoE per IEEE 802. 3af/at with load test for voltage drop, reports current link speed and link capabilities for active ethernet drops.
- Link light to identify location on a server/switch/hub/router port.
- View saved cable tests, define cable name, save/print ALL cable testing and network testing.
Check StockEdimax GS-5416PLC Long Range 16-Port Gigabit Poe+ Web Smart Switch with 4 Rj45/Sfp Combo Ports,Up to 30W per Port Total Power Budget 330W for powering PoE-Enabled Devices,Supports SNMP v3
- 16 Gigabit Ethernet ports and four RJ45/SFP combo ports.
- Up to 30W per port (total power budget: 330W) for powering PoE-enabled devices.
- Auto-detection of powered devices (PD) and Power consumption levels.
- Poe powered devices (PD) alive check to enhance the reliability of the network.
Check StockNetAlly LSPRNTR-300 LinkSprinter 300 Network Tester with WiFi and Distance to Cable Fault Indication, w/WiFi & Distance to Cable Fault Indication
- Discover the nearest switch name and port information via CDP/LLDP/EDP, and verify link speed/duplex and connectivity to TCP/IP networks..
- Validate Power-over-Ethernet (PoE) voltage from power sourcing equipment (PSE) according to 802. 3af/at standards..
- View detailed test results, add comments, and run cable tests using your mobile device over a Wi-Fi hotspot built into the LinkSprinter..
- Automate reporting and enable collaboration with test results upload and management via Link-Live Cloud Service..
Check StockAruba AP-505 802.11ax 1.77 Gbit/s Wireless Access Point
- Compliant Standards : IEEE 802. 11a, IEEE 802. 11ac, IEEE 802. 11ax, IEEE 802. 11b, IEEE 802. 11g, IEEE 802. 11n, IEEE 802. 3af, IEEE 802. 3at, IEEE 802. 3az, Wi-Fi CERTIFIED 6.
- Communications Technology : Bluetooth Low Energy (LE), Zigbee.
- Data Link Protocol : Bluetooth 5. 0, IEEE 802. 11a, IEEE 802. 11ac, IEEE 802. 11ax, IEEE 802. 11b, IEEE 802. 11g, IEEE 802. 11n.
Check StockPoE Injector Adapter PoE+ Injector 30W 10/100/1000Mbps IEEE 802.3af/at Compliant Up to 100 Meters 325 Feet
- ❤ Converts A Non-PoE Gigabit Port To A Poe+ Gigabit Port And Network A Poe Device Located Up To 100 Meters (328 Ft.).
- ❤ Auto-Sensing Technology Delivers Up To 30w To An 802.3at PoE+ Device With Backwards Compatibility For 802.3af PoE (15.4w) Device.
- ❤ 1 Gigabit Ethernet Port Input and 1 PoE+ Gigabit Ethernet Port Output..
- ❤ Plug & Play, No Configuration Is Needed, Simply Connect A Poe Network Device, Accommodates Most Installations Scenarios..
- ❤ Compact and Cost-effective Gigabit PoE/PoE+ injector, IEEE 802.3af/802.3at Compliant.Please Identify the Seller ThePoEstore, the Quality of Other....
Check StockEngenius - Switch - 8 Ports - Managed - Desktop (EGS5212FP)
- 8 Gigabit PoE+ Ports, IEEE802.3at/af support.
- 2 Gigabit uplink Ports and 2 SFP Slots for additional connectivity.
- Internal power supply with 130 w PoE budget.
- IGMP and MLD snooping provides advanced multicast filtering.
- 2 Gigabit uplink ports and 2 SFP slots for additional connectivity.
- Internal Power Supply with 130 W PoE Budget.
- A full-featured Layer 2 PoE+ Switch (Qu's, IGMP/MLD Snooping, STP/RSTP/MSTP, Link Aggregation Control Protocol (LACP), SNMP v1/v2c/v3, and more).
- Easy to manage and configure via a Web-based Graphical User Interface (GUI).
- Up to 24 Gbps non-blocking switching capacity.
Check StockUbiquiti Switch Enterprise 24 PoE | 24-Port Managed Layer 3 Multi-Gigabit PoE Switch USW-Enterprise-24-PoE
- Layer 3, PoE switch with (12) 2.5GbE, 802.3at PoE+ RJ45 ports, (12) GbE, 802.3at PoE+ RJ45 ports, and (2) 10G SFP+ ports.
- (1) 1.3" LCM color touchscreen with AR switch management.
Check StockiCreatin 2-Pack Wall PoE Injector Power Over Ethernet Adapter 802.3af 48V 24W 0.5A for Security IP Cameras IP Phones, 10/100Mbps
- Raspberry Pi 3B+ can work with this poe injector after installed this PoE hat or micro USB PoE Splitter.
- This injector lets you power 802.3af compatible devices, with no additional adapter needed. Just plug the network cable(not included) into your network switch and into the “Data In” port, then plug the cable to your device into the “PoE” port with your existing network cable.
- This Adapter support 10/100/1000Mbps gigabit ethernet connection, RJ45 PoE port using 4,5,7,8 pin as power transfer, Please do not connect any device that does not support the “PoE” port, this will damage your device.
- This is an 802.3af compatible device, but it does NOT include the 802.3af/802.3at compliant detection feature. It supplies power NO MATTER WHAT, so don’t plug the “PoE” side into anything that isn’t ready for it.
- Compatible all 802.3af PoE power device as IP Phone, IP camera, Gateway , Switch, or More…...
Check StockStarTech.com 4 Port Gigabit PoE (Power over Ethernet) Card - PCIe Network Card - PoE / PoE+ Up to 25W Per Port - PCIe NIC - Gigabit Ethernet Card (ST4000PEXPSE)
- FULLY COMPLIANT: This 4 port Gigabit PoE card is fully compliant with IEEE 802.3at (Type 1 & 2) Power over Ethernet (PoE) standards.
- PSE SUPPORT: This PCIe network card features a Power Sourcing Equipment (PSE) endpoint that supports up to 48V, 25.5 watts max. output per port.
- POWER YOUR PoE DEVICES: Provide connectivity and power to compatible PoE devices, including cameras and wireless access points using this PCIe PoE Ethernet card.
- ULTIMATE SUPPORT: The Gigabit NIC supports IEEE 802.3at, 802.3az Draft 2.2 Energy-Efficient Ethernet (EEE), 802.1q VLAN tagging, 802.1p Layer 2 Priority Encoding and 802.3x Full Duplex Flow Control.
Check StockCudy 8 Port Gigabit PoE Switch, 120 Watts PoE Budget, 8 10/100/1000Mbps PoE+ Ports, 2 Gigabit Uplink Ports , 802.3at, 802.3af, 1/2 (+), 3/6 (-), Fanless, Plug and Play, GS1010PE
- 120 watts reliable 8 ports gigabit PoE+ switch. GS1010PE contains 10 gigabit RJ45 ports, #1~#8 port support PoE functions which could offer 120 watts total PoE budget, while port #9~#10 port are just uplink ethernet ports only transfer data..
- 8 Gigabit PoE+ ports Ideal for small installations of 8 PoE or PoE+ devices (IP Phone, Wired surveillance camera, Wireless Access Point). 2 Gigabit uplink ports are suitable for connecting to the Internet and NVR respectively, which is very suitable for video surveillance and WiFi access applications..
- Compatible with any IEEE802.3af PoE and IEEE802.3at PoE+ device. Auto-sensing technology delivers up to 30W to an 802.3at PoE+ (30 watts) device with backwards compatibility for 802.3af PoE (15.4 watts) devices. Not support any passive (non-standard) PoE devices..
- Watchdog function will detect the status of the powered device in real time, once an abnormality is detected, the switch will actively reset the problem port and restore power..
- Plug and play, simple set up with no software or configuration needed. Built in power supply accommodate for most installation scenarios..
Check StockStarTech.com 1 Port 2.5Gbps PoE Network Card, PCIe Ethernet Card w/RJ45, 30W 802.3at PoE NIC for Desktops/Servers, Network PoE LAN Adapter w/Low-Profile Bracket, NBaseT, Windows/Linux (ST1000PEXPSE)
- 2.5G NETWORK CARD WITH POE: This PCI Express x1 Network Card enables 2.5Gbps network speeds and supplies (PSE) 30W PoE over a single CAT5e (or later) cable - Leverage existing copper cabling without the use of a Power over Ethernet (PoE) injector.
- POE+ COMPLIANT: Card provides up to 30W PSE and 25.5W PD at 48V DC to a connected device - Supports IEEE 802.3af (PoE) and 802.3at (PoE+) to power remote devices such as access points, RFID readers, and IP cameras.
- MULTI-GIGABIT CONNECTIVITY: The Network PoE Card features 2.5GBASE-T (802.3bz) and will auto negotiate to the connected device's highest possible speed - The PCIe Network Card supports Wake-on-LAN and RealWoW for remote wake up of the host computer.
- TECH SPECS: 2.5Gbps/1Gbps/100Mbps/10Mbps - NBASE-T - 1x RJ45 Port - Realtek RTL8125B - IEEE 802.3af/at - 802.3az EEE - PCIe 2.1 x1 - SATA & SP4 Power Connectors - Link/PoE LED Indicators - 16K Jumbo Frame - VLAN - PXE Boot - Full and Low-Profile Brackets.
- VERSATILE POE NETWORK CARD: The PCIe Ethernet Adapter supports Windows and Linux - Variable speed options and includes a low-profile bracket for Small Form Factor (SFF) systems ensures compatibility of the PoE NIC with current and legacy devices.
Check StockCudy 8 Port Gigabit PoE+ Switch 120W, PoE Switch, 60 watts port1, 8 PoE Ports, 802.3 at/af, POE, PoE+, VLAN, Extend to 250 Meters, Not Support 802.3bt, GS1008PT
- 8 Port Gigabit PoE Switch, 120 Watts total PoE Budget + 2 x PoE+ports ( 60 watts maximum) +6 x PoE+ Ports(802.3at, 30 watts maximum)..
- IEEE 802.3 at/af Compliant. Port #1 and #2 support IEEE 802.3 at/af, which could offer up to 60 watts PoE power. Port #3 ~ Port #8 support IEEE 802.3 at/ af, which could offer up to 30 watts PoE power..
- VLAN Port Isolation. When working on VLAN mode, Port #1 ~ Port #6 will isolated from each other, while port #7 and #8 can communicate with them all. It is easy to manage and maintain, which can meet a lot of networking environment, such as Business building, Community, Hotel, Office etc..
- Extend Long Distance. When working on Extend mode, the data transmission distance of Port #3 ~ #6 can be extended up to 250 meters(10Mbps speed), which is easy to expand network via ethernet cable to somewhere without power supply but need fix device such as IP Cameras..
- Plug and play, Wall mount support, internal power supply. Power input support wide voltage range from AC 100V to AC 240 V. While the power output range is 44V to 52V accroding to IEEE 802.3af/at/bt standard. #Important Note: This item only support IEEE802.3 at/af device, does not support any non-standard or passive POE device.#.
Check Stock