Best 8mm Spur Gear

ARRMA Slipper Clutch Maintenance Set ARAC9103

• ARRMA ARA311034 - HD Slipper Set, 0.8Mod, 57T.
• Features: Precision manufactured aluminum slipper hubs Durable composite 57T 0.8 module spur gear for reliable power handling capability Castellated....
• Includes: (1) Assembled Slipper Clutch with Composite Spur Gear.
• Part number(s) included (in factory packaging): ARA311034.

DAPENGNIAO for Das87 6 Pcs M0.2 Brass 10T-50T Spur Gear Accessories

• 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
• Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
• With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..

Boston Gear L5092 Rack Gear, 14.5 Degree Pressure Angle, 20 Pitch, 2.0 feet long, Steel

• 50 tooth hardened steel Mod 1 (1.0 metric pitch) spur gear for the Traxxas E Revo2, X-Maxx 6S and 8S, Maxx 4S and XO-1.
• Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 - Adjusting Gear Mesh).
• With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them..

35.8CC 4Stroke Gas Concrete Wet Screed Finish & Level Power Screed Cement 1.36HP Gas Garden Tiller Rototiller Cultivator Yard Raised

• Product Name: 1.5 Mod Step spur gear, Material: 45# steel.
• Number of teeth: 12T, 15T, 16T, 18T, 20T, 24T, 25T, 30T, 35T, 40T, 45T, 50T, 60T, 65T, 70T, 80T.
• Model: 1.5M12T, 1.5M15T, 1.5M16T, 1.5M18T, 1.5M20T, 1.5M24T, 1.5M25T, 1.5M30T, 1.5M35T, 1.5M40T, 1.5M45T, 1.5M50T, 1.5M60T, 1.5M65T, 1.5M70T, 1.5M80T.
• Inner hole: 5mm, 6mm, 6.35mm, 7mm, 8mm, 10mm, 12mm, 15mm, 14mm, 17mm, 20mm, 16mm, 25mm.
• Fast Shipping Guarantee: All parcel will be delivered in 7-15 days.

Zerodis Spur Strap, 1 Pair Handmade Leather Equestrian Spur Strap Cowboy Outfit Boots(Black)

• Gentle on your horse (especially if you're new to riding with spurs) but effective when used correctly - and no spur marks! They also look great with a black boot and fit nicely..
• If you love your horse you will love these spurs. Very gentle....
• Fantastic quality and workmanship. Worth every penny..

Mxfans 30 T Brass Gear Wheel & 4MM Hole Dia Shaft Set 0.5 Mold 1:30

KXA 9Pcs/Set CJ0618 Household Small Lathe, Micro Lathe Gear, Metal Exchange Gear

TAMIYA America, Inc 1/10 Frog 2WD Buggy Kit, TAM58354

• Changeable pinion/spur gears-allows gear ratio changes-3 of each included.
• Straight ribbed racing front tires and high-grip rears.

ACDelco GM Original Equipment 23271566 Hydraulic Rack and Pinion Steering Gear Assembly with Inner Tie Rods

Hobbypark 11184 Steel Diff Differential Main Metal Spur Gear 64T &11119 Motor Gear 17T RC Replacement Parts for Redcat HSP 1/10 Monster Truck

• Produced by HobbyPark,Compatibile with: Redcat Lightning EP Drift, Lightning EPX PRO, Sandstorm, Sandstorm TK, Tornado Epx/epx PRO, Tsunami EPX, Volcano Epx/epx PRO, Vortex Epx/epx PRO 1/10 Scale Truck HSP.
• 1x Diff Main Gear (64T) Diameter of The Hole:5mm.
• 1xMotor Gear (17T) Diameter of The Hole:3.17-3.18mm.
• 1 xGrub Head Screw (As shown in the picture).
• please attention, because of the motor gear and this spur gear are metal, suggest to add lubricating oil, not only to reduce the friction between the metal gear, but also the sound will be a little bit small.

Team Associated 20155 MT28 Monster Truck Ready to Run 1/28 Scale 2WD with Battery Charger & 2.4Ghz Transmitter

• Product Name : Steel #45 Spur Gear 56T & Double Speed Reduction Gears - 2Pcs Set.
• Made by high quality hardened STEEL #45 to replace the original stock gear for more strength and increase durability..
• Will fit : Thunder Tiger 1/14 Crawler KAISER XS 6602-F.

Weaver Leather Spur Straps with Rawhide Corners Russet

• Spur Strap is made of smooth leather lining and pu surface coat, which is good toughness and soft. Size: Approx. 20.5x3.5x1.6cm/8.07x1.38x0.63in.spur straps western.
• Adjustable metal buckle: solid, durable and not easily to rust or broken. Small roller is easy to adjust.spurs for boots.
• Strap on your boots with these sturdy Leather Single Spur Straps! Perfect for the cowboy or cowgirl in your life, these Leather Spur Straps are sure to keep your spurs strapped on tight. Whether you are getting ready to hit the open trail, or are just trying to hit the open trail, these Leather Single Spur Straps have you covered.spurs straps for boots.
• Horse riding western spur set for men, small tools for outdoor sports.western spur straps.
• We greatly value our customers and want you to be completely satisfied with your purchase. If you aren't happy with your shopping experience or product, we urge you to contact us so we can resolve the issue!western spur straps for men.

Gear and Sprocket Replacement Kit for Liftmaster 41c4220a, fits Chamberlain, Sears, Craftsman 1/3 and 1/2 HP Chain Drive Models (Chain Drive Gear and Sprocket Kit)

• Kit Includes: Gear and sprocket, worm gear, grease, motor shaft bearings, sprocket bearings..
• Compatible with Chamberlain, Sears, Craftsman and LiftMaster 1/3 and 1/2 HP chain drive models..
• Compatible with chain drive Chamberlain Sears Craftsman manufactured operators 1984-current..
• Installation: Step-by-step instructions included, free tech support available. This OEM kit 041c4220a includes all of the 41A2817 Drive / Worm Gear kit, and is easier to install because you do not have to disassemble the output shaft assembly - the spur gear is already mounted on the new output shaft..