Categories

Best 90 degree Lead Angle

SLIIMU 30 45 90 Degree Angle 4 Sizes Drill Hole Guide Jig for Angled and Straight Hole, Portable Deck Cable Railing Lag Screw Drilling Template Block For Horizontal Cable Wood Post,Stair Wire Handrail

  • ...ellent finish, corrosion resistance and durability. The guide holes of this drill guide are inlaid with steel drill sleeves, so there is no need to worry about it being worn during drilling, causing the guide holes to become larger and lose accuracy..
  • THREE DRILLING ANGLES: The drill guide has a drilling angle of 30 degrees, 45 degrees and 90 degrees. Suitable for 90 Degree horizontal deck post and 45&30 degree angled stairs railing, the angle is fixed without deviation, you can quickly drill accurate 30/45/90 degree angle holes with a handheld drill on the deck post, saving your working time..
  • FOUR SIZES OF GUIDE HOLES: There are four sizes of guide holes for each drilling angle, which are 3/8”(9.52mm), 5/16”(7.93mm), 1/4”(6.35) mm), 3/16″(4.76mm), compatible with most cable railing lag screws. In order to drill the angle hole more accurately, please use a drill of the corresponding size..
  • SCOPE OF APPLICATION: This drill guide can be used in conjunction with Locking C-Clamp and F clamp to prevent the drill guide from shaking when drilling, and the drilled holes are free of burrs and cracked. It is suitable for the installation of wooden, aluminum, and stainless steel deck posts for cable railings and DIY woodworking projects..
Check Stock

Anderson Metals 50065 Brass Compression Tube Fitting 90 Degree Elbow 3/8 x 3/8 Tube OD,50065-06

  • 90-degree elbow for connecting two tubes at an angle.
  • Female compression tube fitting for connecting to male threaded pipes.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperature range of -65 to 250 degrees F.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

HEWEGO Angle Clamp, 4PCS 90 Degree Corner Clamp, Multifunctional Picture Framing Holder, Woodworking Hand Tools

  • Material: Aluminum Alloy with steel screw.Clamping range: 3 inch.
  • Holds Joints at a 90 - degree angle for precise secure assembly.
  • High hardness, will not rust, suitable for the production of reinforced frame, tank production, etc..
  • Compatible: Fit for Woodworking, fish tank fixing, Picture Frame reinforcement, etc., while generally used for a group of fou.
  • 90° right angle clamp, holds joints at a 90 degree angle, whether you're simply gluing or using fasteners, this miter style clamp will hold stock firm and square at an exact 90 degrees.
Check Stock

Mikego 90 Degree Clamp, Corner Clamp, Right Angle for Woodworking, 2 Pack 5.5"x 5.5" Aluminum Alloy Woodworking Corner Clamps, for Picture Frame, Cabinet, Drawers with 4 Clamps & Gaskets and Gloves

  • 【Woodworking Precision 90 Degree Angle Clamp】Our right angle clamp square kit is made of high-quality aluminum alloy to ensure 90 degree precision. Anodized red surface, anti-rust and corrosion-resistant, CNC processing makes it more durable..
  • 【Easy to Operate】The square jig L edge is slightly chamfered, the surface is smooth and soft, it will not scratch your hands and wooden products. Just place the positioning squares on the corners of the woodwork and secure with a set of clips to make a perfect 90 degree angle, it's easy to use and holds the pieces together..
  • 【Woodworking Square Positioning Tool】Designed to clip onto most types of boxes to help level them during gluing or splicing. Can be used in conjunction with jigs to inspect and position plank seams and glue or weld at right angles. Right angle jigs are a great tool that can make your woodworking projects easier..
  • 【WIDE APPLICATION】This 5.5"x 5.5"/140mmx140mm 90 right angle clip is suitable for assembly and DIY of photo frames, drawers, cabinets, photo frames, furniture cabinets, birdhouses, mailboxes, etc. Great for organizing shelvi....
Check Stock

Mikego 90 Degree Clamp, Corner Clamp, Right Angle for Woodworking, 4 Pack 5.5"x 5.5" Aluminum Alloy Woodworking Corner Clamps, for Picture Frame, Cabinet, Drawers with 4 Clamps & Gaskets and Gloves

  • 【Woodworking Precision 90 Degree Angle Clamp】Our right angle clamp square kit is made of high-quality aluminum alloy to ensure 90 degree precision. Anodized red surface, anti-rust and corrosion-resistant, CNC processing makes it more durable..
  • 【Easy to Operate】The square jig L edge is slightly chamfered, the surface is smooth and soft, it will not scratch your hands and wooden products. Just place the positioning squares on the corners of the woodwork and secure with a set of clips to make a perfect 90 degree angle, it's easy to use and holds the pieces together..
  • 【Woodworking Square Positioning Tool】Designed to clip onto most types of boxes to help level them during gluing or splicing. Can be used in conjunction with jigs to inspect and position plank seams and glue or weld at right angles. Right angle jigs are a great tool that can make your woodworking projects easier..
  • 【WIDE APPLICATION】This 5.5"x 5.5"/140mmx140mm 90 right angle clip is suitable for assembly and DIY of photo frames, drawers, cabinets, photo frames, furniture cabinets, birdhouses, mailboxes, etc. Great for organizing shelvi....
Check Stock

Precision Design DSLR350 High Power Auto Flash

  • Three power settings -- Guide No. 40 (105mm) -- 0.5-6 sec. recycling time.
  • 30 / 45 / 60 / 75 / 90-degree bounce angle -- 180-degree Left / 90-degree Right swivel.
  • Dramatically improves telephoto zoom flash pictures.
  • Improves color, depth and evenness of lighting at all distances -- Zoom head adjusts light output from even wide angle overage to concentrated telephoto for a longer reach.
  • Highly Versatile... Fits most DSLRs and digital cameras with a flash shoe -- Built-in wide angle panel and reflector panel.
Check Stock

90 Degree Angle Drill, Gearwoo 0.8-10mm Right Angle Bend Extension 8mm Hex Shank Professional Cordless Drill Attachment Adapter

  • ▲ Max. 1500RPM and 25N·m torque – This right angle adapter drill can withstand a maximum torque of 25N·m and a maximum speed of 1500 rpm. Heavy duty steel material..
  • ▲90 DEGREE – This 90 degree drill adapter can make drill power swerve 90°and get to hard-reached places..
  • ▲0.8mm-10mm : The right angle drill adapter’s chuck accepts standard 0.8mm-10mm drill bits..
  • ▲ 8MM HEX SHANK – 90 Degree Angle Drill is suitable for most standard drills like hand/power drills, electric drill, buffing attachments etc..
  • ▲After sale& Warranty : Gearwoo sells this product and provides a 6-months warranty, please do not hesitate to contact us if you have any questions.
Check Stock

2wayz - 45° Metal Hose Elbow, Hose Adapter, Hose Angle Connector, Water Hose Shut Off Valve, Heavy Duty

  • NO LEAKING: We added bolts and threads to the 45 degree elbow, creating the ultimate longest lasting elbow! For a perfect hose connector in your household!.
  • NO KINKS: Maneuverability in tight spaces. Whether you have a too-small RV water compartment, you need to extend your recessed spigot, the 45° angle is perfect for tight spaces. The unique 45° angle is great for situations which the 90° is too abrupt, and you want the more gradual angle turn. Heavy duty connector with 003c0.007% lead in the alloy..
  • 360 SWIVEL, OPTIMIZED FOR CONVENIENCE: Our garden hose with shut off valve is swiveling a full 360°, you can easily access the elbow. Effortlessly attach and remove hoses from spigots which are too close to the ground, and use your hands to completely tighten the garden hose elbow to your faucets. No tools needed for the installation of the 45 degree hose adapter..
  • NO STIFFENING: Unlike most shutoff knobs which stiffen with age, you will always be able to easily and smoothly rotate our elbow's long (4cm!) shut off knobs. Also, we coated the elbow with an ANTI SLIP TPR rubber, allowing you to grip it even when your hands are wet! Benefit from the shut off valve!.
Check Stock

Bescor MP101 Video Motorized Pan Head

  • Switch selector for either a 30, 60 or 90 degree movement.
  • Maximum horizontal angle +/-90 degrees. Maximum vertical angle +/- 15 degrees..
Check Stock

Micro Jig SG-133 MATCHFIT Setup Gauge by MICROJIG. Dado Stop Accessory, Yellow

  • All-In-One Brake Machine: Industrial 12in 3-in-1 sheet metal machine is a smart choice for shops. This machine combines three functions into one that utilizes up little floor space and enhances work efficiency..
  • Solid Construction: This 3-IN-1 brake shear roll has a heavy cast-iron frame. The slip roll portion of the shear brake roll has hardened and polished shafts for long life. Designed to perform in a harsh condition and can stand for longer life..
  • Flexibility & Precision: The vertical press brake portion of the shear brake roll machine has a maximum bend angle of 90 degrees with adjustable fingers on the top beam to easily assist with making any size boxes. This ensures adjustability and high accuracy..
  • Manual Operation: You can operate the machine with this lever to make any bendings and rollings as you need. Roll diameter: 39mm. Max. Bending angle: 90°Max. thickness: 20Ga..
  • Multiple Utilization: Widely used in factories, workshops, shops, etc. This 12" brake shear roll can be utilized to cut multiple materials. The shear can be used for mild steel, aluminum, brass, copper, lead, plastic, and zinc..
Check Stock

YON.SOU. Air Die Grinder - 1/4\

  • ⚙️ 90 DEGREE ANGLE HEAD: The right angle die grinder is ideal to work in tight spaces where a straight die grinder can not reach. The right angle style makes it easy to maneuver and precise to control with a clear view of working surface. You wouldn't worry about tight spaces and small jobs anymore with this 90 degree die grinder..
  • ⚙️ POWERFUL AND DURABLE: The pneumatic die grinder features a 0.3 HP motor whose free speed could be up to 20,000 RPM. Inner movement part is made of tungsten steel which could be more resistant to high temperature to prevent overheat. This 1/4" die grinder has long service life with aluminum housing and ball bearing construction..
  • ⚙️ COMPACT&LIGHTWEIGHT DESIGN: The compact and lightweight designed pneumatic angle die grinder is super easy for maneuverability and brings more accuracy, ergonomic designed die grinder body is perfect for one-handed grip. The 90 degree angle head brings more accuracy and possibility to those tight spots and hard reaching jobs..
  • ⚙️ SAFE&EASY to USE: The safety lock of the air angle grinder could prevent accidental engagement, you wouldn't get hurt even if you just start to learn to use the air die grinder. The air inlet filter could keep the die grinder from contamination. Bui....
Check Stock

HARDELL 90 Degree Positioning Squares Right Angle Clamps 5.5\ x 5.5\(14 x 14cm) Aluminum Alloy Woodworking Carpenter Corner Clamping Square Tool for Picture Frame Box Cabinets Drawers

  • 【Precise 90 degree angle clamps for woodworking】Our clamping square kit is made of high quality aluminum alloy and stainless steel clamps to ensure 90 degree accuracy. Anodized red surface,rust proof, durable and corrosion resistant.CNC machined for durability and years of use.
  • 【Easy to Use】 Simply place the 90 degree positioning square in the corner of the part and secure it with a set of wooden clips. It is easy to use and the woodpeckers tools have beveled edges that won't damage fragile cutting edges, creating a perfect 90 degree angle. It's as easy as having an extra hand and greatly increases your ability to make true 90 degree angles.
  • 【Wide Application】This 14cm carpentry right angle jig set is professionally used to assemble boxes, drawers, cabinets, frames, furniture cabinets, etc. At the same time, this clamping square for woodworking has precise graduations and can be used as a ruler. Perfect for squaring up shelf cabinets and keep a square while assembling frames, cabinets, or just about any box.
  • 【Professional Woodworking Square Tools】 Designed to be clamped on most types of boxes to assist in leveling during the bonding process. It can be used with clamps to check and position the joints of the wood panels, and glue or ....
Check Stock

StealthMounts Trax90 XL Track Saw Square for Festool | 90° Right Angle Plunge Saw Guide Rail Angle Stop

  • Right Angle Track Saw Square Guide compatible with Festool Track Saw Guide Rails.
  • StealthMounts Trax90 provides an instant 90 degree Track Saw Angle without need for measuring and clamping your Track Saw Guide Rail..
  • Simply place the Track Saw Guide on the material and push the Trax90 Track Saw Square to align with the edge, instantly setting your track at 90 degrees and ready for cutting..
  • The Trax90 Right Angle Guide slides into your Festool Track and holds firmly using our sprung slide design, no need to make any adjustments or deal with tightening clamps..
  • The vacuum hose guide stops your hose (or power cable) catching on the edge of the track or getting in the way - smoother cutting with no more snagging..
Check Stock