Categories

Best 915mhz Data Transceiver

BlastIR Wireless Pro Transceiver Remote Control Extender IR Receiver and Emitter in one

  • Note: This listing is for the "Transceiver" unit only. It is a single unit that both receives and emits an IR signal. It is recommended that this be....
  • Control all of your home theater video sources (Blu-Ray player, Cable box, TiVo, and anything else that uses a standard IR remote control) from behind....
  • It can be combined with other BlastIR Wireless Kits to be used as an "All-to-All" setup, or to create "zones" and only control specific devices..
  • Wireless Distance: 200m (650ft), distance may vary due to obstacles, IR Receiver Distance: 7m (30ft).
  • IR Frequency: 20-60Khz // RF Frequency: 915Mhz.
Check Stock

Waterproof 8dBi Long Range Cellular Ultra Distance LoRa Gateway Antenna Omni-Directional Glass Fiber LoRaWan 915MHz Antenna with 5M/16.4FT Cable for Helium RAK Hotspot HNT Finestra Miner Mining

  • 【Why choose 8dBi】8dBi antenna is most suitable for Suburban Area, wide open spaces, Low/moderate Hotspots Density Area, Upgrade your Helium Hotspot with this 8dbi gain 915 MHz antenna! Proven to increase your Helium Hotspot radius and allow you to gain additional Helium per day!.
  • 【Center 915MHz】This Antenna is tuned to operate with peak performance for the US915 band. The other Antennas you see out there that say 860Mhz-930Mhz is wide band and will not perform as well as one that is tuned for the US. This is designed for outdoor environments and is weather proof..
  • 【Application】Compatible with all 915MHz helium miner hotspot, Long Distance LoRa Nodes, LoRaWAN, Indoor/Outdoor RAK V1 V2 Nebra Bobcat 300 EasyLinkIn SenseCAP M1 & SyncroB.it Finestra MNTD Kerlink Helium Hotspot HNT Miner Mining etc.(915MHZ versions only)..
  • Frequency Range: 900MHz – 930 MHz (Center 915MHz).
  • 【Packing List】1*8dBi Fiberglass Antenna, 1* 16.4ft Low loss #200 Cable，1* Adapter，1* Mount..
  • 【After-Sales】Never worry about any security problems. We are confident in the quality of our Antenna, You only need to spend a few days to verify, We w....
Check Stock

Intel D915GAGL Intel 915G Socket 775 micro-ATX Motherboard w/Video, Audio & LAN

  • Intel D915GAGL Intel 915G Socket 775 mATX Motherboard General Features: Intel 915G chipset.
  • mATX Form Factor Socket 775 architecture Supports 800/533 MHz Front Side Bus.
  • Supports up to 4 GB DDR 400/333 MHz RAM Intel Graphics Media Accelerator 900.
  • Intel High Definition integrated audio Integrated 10/100 Fast Ethernet LAN.
Check Stock

TYT TH-9000D 1.25M Amateur Radio, 200CH Mobile Transceiver Car Radio 222-225Mhz 45W

  • 1.▲▲☞FONGHOO☜▲▲ Official Distributor of TYT. TH-9000D is mono band mobile car radio transceiver, the less button make it easy to operate..
  • 2.Features: 8 Group's of Scrambler, large LCD screen with adjustable brightness, DTMF/2 tone/5 tone, Full Keypad Microphone, 200 Alphanumeric Channels, 50 CTCSS 1024 DCS and 200CH for more communication options.
  • 3.FCC Part Certified (FCC ID: PODTH-9000DV2), 220MHz (1.25M) Mobile Transceiver, Frequency Range: TX: 222-225MH, RX: 220-260MHz. Output Power: 45W/25W/10W (High/Mid/Low power selectable).
  • 4.Chirp Support & Free Programming Cable for Easier Programming. Software is available free from TYT Website. Original Cable is recommended for easy computer programming..
  • 5.Package Content: 1* TYT TH-9000D Mobile Transceiver (220-260MHz), 1* Handheld Microphone, 1* Power Cable, 1* Screws and Accessories, 1* User's Manual, 1* Fixed Bracket, 1* TYT Programming Cable.
Check Stock

La Crosse Technology View LTV-W1 - Connected Wireless Wind Sensor

  • Large Impact Resistant Wind Cups, Smart Angled Design – Prevents Buildup of Snow & Debris.
  • Easy Access Battery Compartment, Easy to Use Mounting Bracket.
  • Add-on sensor data will appear in the La Crosse View App.
  • Wind Speed Range: 0 - 99 mph (0 - 159 kMh), Transmission Frequency: 915 MHz.
  • Transmission Range: Up to 400 feet (121 meters) in open air, Power requirements: 2 "C" Alkaline batteries (not included).
Check Stock

MX62 VHF+UHF Duplexer 144‑148MHz/ 400‑470MHz Different Frequency Indoor Antenna Combiner for VHF+UHF Duplexer Antenna Duplexer Antenna Combiner Transit Station Duplexer Walkie Talkie Accessory Differe

  • Fine Workmanship ---- Can also be used to separate UHF/VHF transmissions from UHF transmissions so that one transceiver can be connected to two antennas..
  • Features----------The duplexer combines the output of the HF/VHF transceiver and the output of the UHF transceiver so that both transceivers can be connected to the same antenna..
  • Feature ---- The MX62N duplexer is a series of inductance coils and capacitors that acts as a band‑pass filter..
  • Note ---- The MX62N duplexer can be used in two different ways, used in different frequency, can not transmit at the same time..
  • Applicaation ---- The MX62 VHF + UHF duplexer is designed for indoor use, usage frequency is 1.6‑55MHz / 144‑148MHz&400‑470MHz..
Check Stock

915MHz ESP32 LoRa 0.96 OLED Development Board V3 SX1262 Type-C + LoRa Antenna for Arduino LoraWan IOT Internet of Thing (Pack of 2), not Compatible with WiFi LoRa 32 V2

  • The esp32 lora 915mhz comes unassembled, soldering is required, not equipped with lithium battery..
  • When you use esp32 oled lora, you need to use 2pcs together. One is used for receiving and another for sending.
  • 0.96 oled is mounted on esp32 lora board via 4 screws, so it is removable but pls be careful to do it to avoid damage..
  • You will receive, 2pcs lora oled board 915mhz new version V3, and 2pcs 915mhz lora antenna..
  • If you got the V2, it should be the one returned by others ordered long time ago. Please confirm it with DIYmalls as follow: click "DIYmalls"(you can find "Sold by DIYmalls" under Buy Now button), in the new page, click "Ask a question"..
Check Stock

Signalplus 12dbi Omni-Directional Antenna 824-960MHZ-Outdoor LoRa Antenna 868mhz 915mhz for Verizon AT&T Sprint with 32ft SMA Cable

  • Support RAK2 Nebra Bobcat EasyLinkIn Syncrob helium miner . It can enhance the signal strength and signal coverage, and make miner get more witnesses....
  • Frequency ：824MHz - 960MHz.support 915mhz .Gain : 12dbi (915mhz )，higher the gain ,more suitable for miner ,get more witnesses and more hNT....
  • Must be connected via 50-ohm coaxial cable to a modem / router / gateway / access point / booster / radio device. Does not improve signal for phones....
  • Antenna are made by high quality material, it can significantly enhance the use range and signal transmission capability of your mobile radio..
Check Stock

KPfaster Cell Phone Signal Booster Support Up to 1614 Sq Ft Area Phone Signal Amplifier for GSM 900MHz Mobile 2G 3G 4G + Boosts Voice Data Yagi Antenna Kits

  • 【Improves Phone Call Quality】Nice performance, high gain, low operating temperature,ultra-low noise receive, perfect for people needing fast uploads and downloads for streaming apps such as Google Chrome, Safari, YouTube, Netflix, Pandora, Spotify, and other data-heavy apps..
  • 【Reliable Service】CE and RoHs approved,one year manufacture warranty.All parts is included in the kits,very easy to install. Body 5.5 * 3.9 * 0.8". The external antenna is 17.7 "long and weighs 3 lbs.
Check Stock

MPF Products 993-000321 USB Programming/Charging Cable Replacement Compatible with Select Logitech Harmony 600, 650, 700, Ultimate & Ultimate One Remote Controls (Compatible Models Listed Below)

  • Replacement for the following Logitech cable part number: 993-000321..
  • Compatible with the Logitech Harmony 600 (915-000156), 650 (915-000159) , 700 (915-000162), Ultimate (915-000201) & Ultimate One (915-000224) Remote Controls. Compatible with the Logitech Harmony 600 (915-000156), 650 (915-000159) , 700 (915-000162), Ultimate (915-000201) & Ultimate One (915-000224) Remote Controls. PLEASE NOTE: THE ULTIMATE AND ULTIMATE ONE REMOTES DO NOT CHARGE VIA USB. THIS CABLE IS USED FOR PROGRAMMING ONLY WITH THESE MODEL REMOTES..
  • Precision connectors and twisted-pair construction to ensure high-speed and error-free data transfer..
  • 3 Year Replacement Warranty. MPF Products is a Registered Trademark..
Check Stock

Nelawya 5.8dBi 915MHZ LoRa Gateway Indoor Antenna Magnet Base Pure Copper with 3M/10FT KMR195 Cable for Helium LoraWan RAK Nebra Bobcat 300 SenseCAP M1 Finestra Hotspot HNT Miner

  • Frequency Range:902MHz - 928MHz. Gain:5.8dBi.
  • This indoor pure copper encased omni-directional 915 MHz antenna with 5.8 dBi gain. Results in higher coverage and Increased $HNT revenue.The heavy-duty magnetic base that measures 2.4 inches in diameter and has a 10 ft/3 Meter KMR195 cable attached to go to your miner..
  • Works with Most of LoRa IoT Application to get more witnesses for more HNT rewards.Compatible with RAK Bobcat HNT Hotspot Miner, Helium HNT Mining, Low Data Rate Communication Networks, Long Distance LoRa Nodes, IoT & M2M Nodes, Industrial & Environmental Monitoring, Smart Metering Applications, Inventory Tracking, Vending Machine Data & Monitoring, LoRaWAN, Multipoint and NLOS Applications, Wireless Video and Security Systems..
  • Low Loss Cable:3 Meter(10ft) Long Low Loss KMR195 Cable Allowing Install The Antenna indoor/outdoor.
  • Package List: Antenna Kit x 1, Adapter x 1.
  • This antenna can be used outdoors however the magnet base is not rated for outdoor use, therefore we recommend keeping this inside near a window.Doing so will increase your witnesses and also beacons..
Check Stock

La Crosse Technology TX29UDTH-IT Wireless Temperature and Humidity Sensor

  • Wireless thermo-hygro sensor for use with compatible La Crosse Technology 915 MHz weather stations.
  • transmits to a receiver at 915 MHz frequency from up to 330 feet unobstructed.
  • Assesses outdoor temperatures from -39.8 to 139.8 degrees F and relative humidity levels of 1 to 99 percent.
  • Requires separate purchase of a compatible base and 2 AA batteries.
  • mount with provided bracket in sheltered location.
  • Measures 1-1/2 inches wide by 5/6 inch deep by 5 inches high.
Check Stock

La Crosse Technology TX27U-IT 915 MHz Wireless Temperature Sensor with LCD

  • Wireless outdoor temperature sensor for use with La Crosse Technology 915 MHz weather systems with IT technology.
  • transmits to a receiver at 915 MHz frequency from up to 330 feet unobstructed.
  • Assesses outdoor temperatures from -39.8 to 139.8 degrees F.
  • Requires separate purchase of a compatible base and 1 CR2032 cell battery.
  • mount with provided bracket in sheltered location.
  • Measures 1-1/2 inches wide by 1/2 inch deep by 3-1/2 inches high.
Check Stock