Best Ab Two Component Epoxy
TotalBoat Aluminum Boat Barrier Coat (Gallon, Gray)
- High-build, two-component epoxy primer and barrier coat for excellent corrosion prevention on aluminum hulls and pontoon boats. Can be overcoated with bottom paints or other 1- and 2-part paints.
- Provides superior corrosion protection on all underwater metals.
- Fast drying, with no sanding needed between coats.
- Available in Gray in Quart or Gallon size kits. Coverage: Approximately 225 sq. ft./gallon @ 7 mils wet. Thinner: TotalBoat Epoxy Primer Thinner 200.
Check StockJewelry Drills, Electric Easy Operation Wide Use Resin Drill Set for Crystal for Pearl(with American Plug (Plug Voltage AC 100-240V))
- Medium Infusion Epoxy is a two-component, very low viscosity system developed specifically for use in resin infusion and VARTM processes..
- Medium Infusion Epoxy was formulated to provide for rapid saturation of carbon fiber laminate, fiberglass, and Kevlar..
- Processability parameters are enhanced due to Medium Infusion Epoxy’s low mixed viscosity and wet-out potential..
- This system is not designed to be used in open mold applications..
Check Stock
J-B Weld 8265S Original Steel Reinforced Epoxy Twin Pack - 2 oz (Pack of 2)
- SLOW-CURE FOR COMPLICATED JOBS: A long curing time makes this adhesive perfect for difficult tasks that may require adjustments.
- effectively reposition pieces for up to 80 minutes.
- FIX OFFICE FURNITURE: Such as broken handles and splintered wood.
- also use on garden statues, figurines and the like indoors or out..
- REPAIR TOYS: Repair, don’t throw out small delicate plastic glass or ceramic item, repair toys, use as golf epoxy and more.
- PROFESSIONAL GRADE STRENGTH: Extra-strong, waterproof adhesive.
- MULTI-USE APPLICATION: Indoor or outdoor epoxy glue for metal, wood, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, and PTFE).
- STRONG AND DURABLE: Provides a strong bond that sets clear.
- can be sanded and painted after bonding or repair.
- water, oil, chemical and impact resistant.
- high temperature resistance (-30 to 65 degree Celsius).
- WITHSTANDS ROUGH HANDLING: Two-part epoxy glue instant mix.
- for best results apply epoxy adhesive to clean and slightly rough surfaces.
Check Stock
Bigbong 10cc Liquid Dispenser Paints Solder Paste Silicone Sealant Adhesive Glue Syringe Dispensing Needle Syringe Barrel Adapter
- HIGH QUALITY EPOXY MIXING NOZZLE: Made from premium PE thermoplastic resin material, non-toxic, odorless and insoluble in common solvents, low water absorption and good electrical insulation.
- SMOOTHLY MIXING: Epoxy mixing tubes features 17 Cascades and 4 inch length. The liquid from AB plastic tube into the mixing tube in tube flow do cutting restructuring movement, internal spiral design simplify the mixing process, can make glue mixing more evenly.
- EXPOXY TUBES STATIC MIXER SIZE: Inner Diameter: 0.2 inch (5.4mm). Outer Diameter: 0.3 inch (7.6mm). Length: 4.1inch (103mm). Element Number: 17..
- DISPOSABLE STATIC MIXER: The motionless mix tube is designed for adhesive mixing, meter mix machines, concrete repair, carbon fiber applications, gasketing, and potting. We recommend a mixing ratio of 1:1 or 2:1 to guarantee a complete mix for epoxies, composites, polyurethanes, silicones, and methyl methacrylates.
- WIDE APPLICATION: This lightweight and portable applicator is suitable for the mixing of two liquid materials with large differences in viscosity, and it fits for use with 50mL Cartridges/Duo-Pak Epoxy Cartridges.
Check StockDR CRAFTY Clear Epoxy Resin 64oz Kit for Jewelry Making - Crystal Clear Resin, Art Resin, Epoxy Resin for Tumblers - Complete Epoxy Resin Kit: Quality Epoxy for Art, Jewelry, Resin Molds
- Epoxy adhesives glue color:transparent/clear.
- Clear epoxy adhesive liquid bonds wood, metal, glass, ceramic, concrete, and fabric.
Check StockBigbong 1:1 Dispensing Gun Manual Applicator Adhesive Dispenser & 5pcs Static Mixing Nozzles Mixed Tips & 2pcs 50ml Epoxy Adhesives Glue 2-part Quik Cure Epoxy Glue for Stone Metal Tile Wood Marble
- Epoxy Adhesives Glue Color:Transparent/Clear.
- Package Included:1pc Manual Dispenser Gun & 2pc 50ml Epoxy Adhesive & 5pcs Mixing Nozzles.
Check StockBigbong Epoxy Adhesive 50ml 2-Part Transparent Epoxy Glue Adhesive Granite Marble Tile Bonding Concrete Wood Plastic Joining 1:1 Mix Ratio Two-Part Epoxy AB Glue Two-Component & 2pcs Mixing Nozzles
- Epoxy adhesives glue color:transparent/clear.
- Package Included:1pc 50ml epoxy adhesive, 2pcs mixing nozzles.
Check StockEastwood Catalyzed Technology 2K AeroSpray Epoxy Durable Primer Gray 12 Oz
- Precision Of A 2-Component Coating Without The Paint Gun.
- Most Durable Aerosol Epoxy Primer Available.
- Ideal Application Condition Is Temperature Between 70-85 Degrees F At 50% Humidity Or Less.
Check Stock
Magic Resin | 1 Gallon (3.8 L) | Premium Quality Clear Epoxy Resin Kit | Non-Toxic | High Gloss Thick Clear Coat | for Table Tops, Bar Tops, Counter Tops and Artworks | 100% Solids
- ✅ PREMIUM QUALITY & UV RESISTANT - This epoxy resin product cures to a clear, high build, glass like finish that resists scratching, yellowing and will not distort with age.
- ✅ NON-TOXIC - Enjoy this safe non-toxic resin epoxy for any kind of job. Many uses our Table Top resin for coatings such as countertop, bar top, table top etc...
- ✅ EASY TO USE - Magic Resin Table Top & Art epoxy resin kit is a 100% solids, two component, clear polymer coating that is mixed at a 1 to 1 ratio by volume. Each pour should not be more than 1/4 inch.
- ✅ HIGHLY RESISTANT - This epoxy resin product is scratch resistant, water resistant, impact resistant and will not exhibit blushing or sweat out under high humidity conditions.
- ✅ PERFECT FOR - All kinds of coating applications such as table tops, bar tops, countertops, tumblers, paintings, puzzles, and small arts such as jewelry, coasters, keychains, bookmarks, and much more… Wherever your imagination takes you! Made in USA.
Check Stock
MMDENT New Composite Caulk Carpules Syringe Dispenser Gun Unidose Tip Applicator
- Suitable Cartridge:It's NOT suit for 30cm and it works well on the 50ml kits. Don't be distracted by the plunger diameters as this tool also works on similar material kits with 2:1 and 1:1 ratios., Works replacment for Loctite, replacment for Devcon, replacment for Araldite, replacment for Gorilla, and others with standard 50ml cartridges..
- Size：Fitting mixing.Applicable Rate: 【1:1 ratio and 1:2 ratio adhesive】 Fitting Capacity of Tube Cartridges : 【50ml Cartridges ONLY】.
- Thick material: The handle is user-friendly, the appearance is generous, and the push rod is durable and not easy to wear. The cartridge slides in and is held firmly in place with the lever, then you can dispense mixed epoxy smoothly by squeezing the handles together. Note that you will need disposable mixing nozzles too..
- Specifically used to smear or drip a variety of two-component adhesives or coatings, can completely solve the two-component adhesive products mixed uneven problems..
- If you have any question, feel free to contact us and we will try our best to give you a satisfactory answer for you..
Check Stock
EGR Exhaust Gas Recirculation Pressure Feedback Sensor Compatible with 1994-2010 FordMercury Lincoln Replacement for F77Z-9J460-AB DPFE15
- ...uce atmospheric pollution due to hydrocarbon emissions and reduce to fuel consumption to improve engine efficiency. This EGR Valve Pressure Feedback Sensor is a direct replacement for Ford, Lincoln or Mazda part, easy to install..
- High Quality - Manufactured from premium materials for a long service life, every component has undergone testing to ensure proper fit and performance.uel consumption to improve engine efficiency. This EGR Valve Pressure Feedback Sensor is a direct replacement for Ford, Lincoln or Mazda part, easy to install..
- Compatible Vehicles - Fit for 1996-1997 Ford Aerostar, 1995-2000 Countour, 1994-2000 Crown Victoria, 1996-2002 E-250 Econoline, E-350 Econoline Club Wagon, 2003-2008 Escape, 1997-2004 Expedition, 1996-1998 Lincoln Mark VIII, 1998-2004 Navigator, 1996-2000 Town Car and 200+ models, please input your make, model and trim level into the Amazon Garage to make sure this part fits your exact vehicle..
- Replaces OE number - DPFE15, 1L3Z9J460AA, 3S4Z9P449AA, 98BB9J460AB, E4ZZ9J460B, F6DZ9J433DD, F77E9J460AA, F77E9J460AB, F77Z9J460AB, F7DZ9J433AA, F7UE9J460AA, F7UE9J460AA, F7UZ9J460AA, F77Z9J460AB, F77Z9J460AB, F7UE9J460AA, F7UE9J460AA, F7UZ9J460AA, AJ9318211, AJ9318215, ZZM320302, ZZP020302, ZZP220302..
Check StockBigbong 2pcs 50ml 1:1 Epoxy Resin Black AB Glue Epoxy Glue 2-Part Epoxy Adhesive Epoxies & 5pcs 1:1 Mixing Nozzles Static Mixer & 1pc 50ml 1:1 Manual Applicator Dispensing Gun Dispenser Applicator
- Epoxy adhesives and manual applicator Mixing ratio: A:B,1:1.
- Epoxy glue and dispensing gun capacity: 50ml.
- Epoxy Resin curing time: approx.5 minutes.
- Epoxy AB glue is suitable for bonding wood metal plastic ceramic stone stainless steel bakelite iron ect..
Check Stock32OZ Epoxy Resin and Hardener Kit Crystal Clear for Jewelry DIY Art Crafts Cast Coating Wood,Easy Cast Resin with 4pcs Sticks,2pcs Graduated Cups 2 Pairs Gloves,1 Instructions
- 1:1 Ratio By Volume & EASY TO USE. Teexpert art epoxy resin AB adhesive kit is perfect for artwork art craft cast resin, also for coating epoxy. Very....
- CRYSTAL CLEAR & SELF LEVEL. The easy clear cast craft resin epoxy pour kit is crystal clear casting and coating system. To ensure better self level....
- HARD AS A ROCK & NO BUBBLE. The leisure art craft DIY resin epoxy kit is fast curing and hard as a rock if you ensure 1:1 ratio by volume, and stir....
- WIDE USE & NON TOXIC. The art craft crystal clear epoxy resin and hardener kit is for Jewelry Wood metal steel artwork drawing canvas paintings....
- 100% MONEY BACK & NOT YELLOW. For any reason you are not 100% happy with the epoxy resin, you can just apply for a full refund at no additional cost.....
Check Stock
