Categories

Best Abb Gas Turbine

Worx Wg545.1 20v Air Cordless Leaf Blower Sweeper

  • [TURBINE FAN TECH] Worx engineers figured out how to get a jet engine-type motor inside of a leaf blower. Super powerful, yet not so loud that you’ll think it’s getting ready for takeoff.
  • [2 SPEEDS FOR DIFFERENT JOBS] Go slow for pavement or tight corners. Switch to speed 2 on the open lawn and see what 75 mph of Turbine blowing power can do.
  • [SAME BATTERY, EXPANDABLE POWER] The same battery powers over 75+ 20V, 40V, and 80V lifestyle, garden, and power tools in the Power Share family.
  • [A WIDE, STRONG STREAM OF AIR] 360 CFM (Cubic Feet per Minute) come streaming out of this wide-mouth tube. That’s high-capacity air volume, so you clear your property in fewer passes and with less leg work.
  • [ONE-HANDED OPERATION] With all that power, the Turbine is designed to be controlled with just one hand. It’s only 4.9 lbs., and the ergonomic design funnels the wind in a way that’s easy to handle.
  • [GREEN AND MEAN] No gas and no cord plugged into the wall. Rechargeable, battery-powered tools are friendlier on the environment, more cost-effective, and more convenient. And they don’t skimp on power.
  • [COMFORTABLE CONTROL GRIP] The rubber overmold handle absorbs vibration and reduces hand fatigue, so you can get more done with less strain.
Check Stock

WORX TURBINE 12 Amp Corded Leaf Blower with Fit Gutter Cleaning Kit for Blowers

  • TURBINE fan technology delivers forceful, high-capacity air volume that is up to twice as fast as professional gas blowers.
  • Dynamic airflow design and Hyper-Stream nozzle for maximum performance, variable speed control to adapt to your outdoor cleaning challenges.
  • Universal adapter fits all major brands of gas and electric Blower/Vacs.
  • Safely clean gutter debris while standing on the ground. Maximum Diameter Up to 5 inches.
Check Stock

WORX 20V Turbine Cordless Two-Speed Leaf Blower Power Share - WG547 (Battery & Charger Included)

  • [TURBINE FAN TECH] Worx engineers figured out how to get a jet engine-type motor inside of a leaf blower. Super powerful, yet not so loud that you’ll think it’s getting ready for takeoff.
  • [2 SPEEDS FOR DIFFERENT JOBS] Go slow for pavement or tight corners. Switch to speed 2 on the open lawn and see what 75 mph of Turbine blowing power can do.
  • [SAME BATTERY, EXPANDABLE POWER] The same battery powers over 75+ 20V, 40V, and 80V lifestyle, garden, and power tools in the Power Share family.
  • [A WIDE, STRONG STREAM OF AIR] 360 CFM (Cubic Feet per Minute) come streaming out of this wide-mouth tube. That’s high-capacity air volume, so you clear your property in fewer passes and with less leg work.
  • [ONE-HANDED OPERATION] With all that power, the Turbine is designed to be controlled with just one hand. It’s only 4.9 lbs., and the ergonomic design funnels the wind in a way that’s easy to handle.
  • [GREEN AND MEAN] No gas and no cord plugged into the wall. Rechargeable, battery-powered tools are friendlier on the environment, more cost-effective, and more convenient. And they don’t skimp on power.
  • [COMFORTABLE CONTROL GRIP] The rubber overmold handle absorbs vibration and reduces hand fatigue, so you can get more done with less strain.
Check Stock

OLFA 9mm Snap Off Replacement Blades, 50 Blades (650 Segments) ABB-50B - Ultra-Sharp Black Utility Knife Replacement Blades, Fits most 9mm Utility Knives

  • RAZOR SHARP 9mm PRECISION BLADES - Double-honed for extreme sharpness, OLFA 9mm Ultra-Sharp Black Snap Blades are 25% sharper than standard silver blades. Made from Japanese tool steel for unmatched sharpness and edge retention to work longer..
  • CONTAINS 50 BLADES / 650 SEGMENTS - You'll receive 50 blades in this refill pack. Each blade contains 13 razor-sharp ABB Carbon Steel Snap-Off segments (650 segments total). Simply snap for a new sharp blade edge..
  • COMPATIBLE WITH 9mm KNIVES - OLFA's ABB Ultra-Sharp Black Snap Blades are compatible with most 9mm knives. For best performance, pair OLFA 9mm blades with OLFA 9mm handles. Replacement blades available in quantities of 10 (ABB-10B) and 50 (ABB-50B)..
  • CUTS A VARIETY OF MATERIALS - These replacement blades provide accurate and reliable performance when cutting cardboard, wallpaper, vinyl, paper, foam board, caulking, molding, and more. Great for use at home or on the job..
  • THE OLFA STANDARD - As the original inventor of the Snap-Off Knife, OLFA has maintained a standard of cutting excellence for our quality and durability. Pairing your OLFA 9mm Utility Knife with OLFA 9mm Blades will provide optimal results..
Check Stock

Telemecanique LRD-05 Bimetallic Overload Relay 0.63-1Amp

  • Factory Authorized ABB Controls Distributor.
  • Tech Support on all products purchased from us..
Check Stock

ZOK27 Gas Turbine Compressor Wash Fluid

  • ZOK27 is approved by Airbus, Boeing, GE, Honeywell, Pratt & Whitney, Rolls Royce, Siemens, Solar, Turbomeca and almost all gas turbine manufacturers..
  • ZOK27 is manufactured by ZOK International Group and distributed through Zokman Products Inc..
  • ZOK27 NSN’s 7930-01-391-9721, 7930-01-398-1013 & 7930-01-483-4235..
  • ZOK27 is also known as ZOK 27 and ZOK-27..
Check Stock

Cordless Leaf Blower, 150MPH Electric Mini Leaf Blower with Battery and Charger, 2 Speed Mode, Battery Powered Leaf Blowers for Lawn Care, Patio, Blowing Leaves and Snow

  • [TURBINE FAN TECH] Worx engineers figured out how to get a jet engine-type motor inside of a leaf blower. Super powerful, yet not so loud that you’ll think it’s getting ready for takeoff.
  • [2 SPEEDS FOR DIFFERENT JOBS] Go slow for pavement or tight corners. Switch to speed 2 on the open lawn and see what 75 mph of Turbine blowing power can do.
  • [SAME BATTERY, EXPANDABLE POWER] The same battery powers over 75+ 20V, 40V, and 80V lifestyle, garden, and power tools in the Power Share family.
  • [A WIDE, STRONG STREAM OF AIR] 360 CFM (Cubic Feet per Minute) come streaming out of this wide-mouth tube. That’s high-capacity air volume, so you clear your property in fewer passes and with less leg work.
  • [ONE-HANDED OPERATION] With all that power, the Turbine is designed to be controlled with just one hand. It’s only 4.9 lbs., and the ergonomic design funnels the wind in a way that’s easy to handle.
  • [GREEN AND MEAN] No gas and no cord plugged into the wall. Rechargeable, battery-powered tools are friendlier on the environment, more cost-effective, and more convenient. And they don’t skimp on power.
  • [COMFORTABLE CONTROL GRIP] The rubber overmold handle absorbs vibration and reduces hand fatigue, so you can get more done with less strain.
Check Stock

Roof Turbine Vents 12 inch Rotating Chimney Cap Stainless Steel Wind Turbine Ventilator with Claw Base - Energy Saving for Houses Factory Attic Farm (Full Product Assembly is Needed)

  • 【304 STAINLESS STEEL】The roof turbine vent made up of thickened stainless steel material which will not rust, sturdy and durable. Also easy to clean..
  • 【POWER-FREE ROOF VENT】The turbine ventilator applies the theory of convection between natural wind and air to accelerate and transform any parallel airflow into vertical so as to improve the indoor ventilation. The hot air rises and cold air falls, which makes the fan rotate to make indoor heat, stink and dust are exhausted effectively. Energy saving and no electricity cost to reduce your energy bills..
  • 【NO NOISE & RAIN PROOF】Roof vent fan has no noise during spinning. The distance between the downward protruding slats is small enough to prevent rain from entering the ventilation system..
  • 【WIDE APPLICATION】With high sensitivity for all-day operation, this turbine vent is widely used in the ventilation of large plants, warehouses, stadiums, animal farms, high-rise buildings and residential buildings etc to effectively remove indoor soot, smoke, odor, moisture, heat, decorative harmful gas, and dust etc..
  • 【ASSEMBLY NEEDED & EASY TO INSTALL】External installation provides more freedom. Convenient to install with claw base. Fits most standard chimney with base diameter of 11.81”(300mm). Pl....
Check Stock

T POWER 12v Ac Dc Adapter Charger Compatible with HP Pavilion 20" 23'' x20LED LCD LED Backlit Monitor P,N: WN004A WS229AA 2011X 2211X 2311X 2011xi 2011xi,A XP597AA#ABA LV876AA#ABB Power Supply

  • HP x20LED 20″ LED Backlit Monitor PN: WN004A WS229AA , AC501, AC711, AC915, AF705, AL506, AL511, AL512, AL532, AL712, AL713, AL715, AL716, AL722, AL732, AL922.
  • HP JetDirect 175X Print Server , MW-PCA-003 or HP-OD042D03 Viewsonic V1100 , HP PE1227 F1503 F1703 LCD monitor , HP Compaq T5510 T5515 T5520 T5000 T5125 T5300 T5525 T5700 T5710 Terminal external power 12V 4A 65W.
  • T-Power Made with the highest quality , Brand-new Input Volt Range: 110-240V ( 12v ).
  • Compatible Model : HP Pavilion LED LCD Monitor 2011X 2211X 2311X 2011xi , 2011xi,A , 20″ 23” PN: XP597AA#ABA , LV876AA#ABB , LV877AA#ABB , HP 2011x LV876AA#ABB LV877AA#ABB , HP XP597AA#ABA Pavilion 2011x 20″ LED LCD.
  • HP 2311cm 2311f 2311xi , HP ScanJet 3500C 4300CSE 3570C 4400 3970 4600 3970C G3010 Scanner , LITEON PART NUMBER : PA-1041-0 , HP LITEON PART NUMBER : PA-1041-0 , HP MODEL: ADP-40DD B LCD MONITOR PRINTER ADP40DDB , HP Compaq FP745A LCD monitor T5525 T5700 T5710 Terminal T5530 Thin Client , HP 1530 PE1235 PE1245 LCD Monitor , HP PART NO PN: 631639-001 631638-001 ,.
  • AG Neovo LCD MONITOR: F-417, F-419, M-15, S15T, S15V.
  • ADI LCD MONITOR: A2304, A500, A5000, A501, A502, A505, A700, A701, A704, A707, A904, I600, I610, MJ15, MJ175, MX15, S500.
Check Stock

Turbonator Dual Fan,64mm/2.5in Intake Turbo Fan Diameter Aluminum Alloy + Rubber Car Air Intake Turbonator Dual Fan Turbine Supercharger Gas Fuel Saver Turbo (Red)

  • FEATURES: Increase the intake air volume of the combustion chamber by the turbofan, improve the combustion efficiency of the combustion chamber gas and thus enhance the horsepower..
  • WORKING PRINCIPLE: ABS new material fan blade draws air into the combustion chamber at a higher rate, Improve the atomization degree of the combustion chamber, increased horsepower and gasoline savings..
  • MATERIAL: ABS new material fan blade+Aluminum alloy pipe. ABS material is corrosion resistant, heat resistant, high hardness and does not produce metal debris entering the combustion chamber. Aluminum alloy pipes are corrosion resistant, durable and lighter in weight..
  • INSTALLATION POSITION：The turbine is installed in the intake hose of the engine, and the best position is 10cm-30cm / 3.94 "- 11.8" before the throttle valve. Note: suitable for car models with inlet pipe diameter greater than 2.5 inches..
  • PACKAGE and SIZE : 1 x Intake Fan,3 x Rubber Loop,Intake turbine size: 7.5cm x 6.5cm/ 2.9inch x 2.5inch..
Check Stock

Turbo Rebuild kit for Holset HX35 HX35W HY35 HX40 HE341 HE351 HE351CW

  • These turbochargers were popular For Cummins turbodiesels (will not fit VE, H1C & H1E turbos).
  • Both type journal bearing included – the HX35/HY35/HX35W/HX40 style and the HE351/HE351CW/HE341 grooved style bearing. Upgrade Step Gap Turbine Seal....
  • It greatly reduces the build up of power robbing deposits due to oil leaking through the seal into the turbine housing and on the turbine wheel..
  • If your turbo is an HX40 you may need two turbine seals because some HX40 turbine shafts utilized two turbine end seals. This kit contains two turbine....
  • Nice quality kit. Complete gasket set included. Gaskets are high quality fiber material with controlled-swell styrene butadiene rubber binder and can....
Check Stock

LTKJ 10Pcs Grade 5 Titanium Round Bar Ti Metal Rod Diameter 2mm Length 25cm 10 inches

  • Length: approx. 250mm , Diameter: approx. 2mm ,10pcs per pack..
  • Titanium rod is light in weight.High strength and hardness..
  • High temperature and low temperature resistance..
  • Excellent corrosion resistance, good thermal stability..
  • Application: aviation, aerospace, chemical, shipbuilding and other industries widely used, manufacture gas turbine components..
Check Stock

Goss GHT-100L Soldering Brazing Hand Torch with Hot Turbine Flame and Piezo Lighter Tip

  • Great torch tool kit for Plumbing, HVAC, Refrigeration and heating jobs.
  • Goss Switch Fire tips have a hot turbine flame that can solder and braze copper pipe faster than conventional tips.
  • Piezo igniter built onto the tip. Filtered orifice to prevent clogging.
  • Used with MAP-Pro, Propylene, or Propane Fuel gas.
  • Tips are interchangeable with other GHT Switchfire Styles.
Check Stock