Categories

Best Abn Fuel Pump Module Spanner Wrenchs

DeWalt Pack of Two N079326 Spanner Wrenchs

  • DeWalt Pack of Two N079326 Spanner Wrenchs.
  • Please note: Consult owner's manual for proper part number identification and proper installation.
  • This spanner wrench allows user to secure or remove the flange nut which holds the grinding disk.
  • For use with various DeWalt models including: D28112 Type 2, D28114 Type 1, D28402 Type 1, D28402 Type 2, D28402B, D28402K Type 2, D28402N Type 2.
Check Stock

Sealed Power 224-51198 Oil Pump Repair Kit

  • Adjustable Size: This oil pump cap cover has large adjustment range which is suitable for different oil pump caps.185mm maximum diameter, 135mm minimum diameter..
  • This tool is ideal for removing 5 & 7 hole fuel tank lids.Bending foot type with radian design, more suitable for the installation surface of oil pump cover, to ensure that the operation is not easy to slip..
  • A Must Have Tool: This fuel sender tank lock ring tool will help tackle the job of replacing the fuel sender fast and effective without damaging the oil pump rings..
  • Intended Use: This fuel pump removal tool can easily remove and install lock ring on the fuel tank when servicing the fuel pump or fuel sending unit. （use with a 1/2" drive ratchet or breaker bar）.
  • Applications: This fuel tank ring tool is suitable for vehicles to remove and install the fuel pump retaining ring that holds the fuel pump module on the gas tank.(Check the size before buy).
Check Stock

ABN Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set

  • EASY TO USE: Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm (both included) spanner to undo nut.
  • If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the water pump, remove bolts and reinstall over bar.
  • PACKAGE CONTENTS: 32mm and 36mm fan clutch removal tool set includes (2) standard size wrenches (32mm and 36mm spanner sizes) and (1) pulley bar.
Check Stock

Universal Fuel Pump Removal Tool Adjustable Fuel Pump Lock Ring Tool Fuel Tank Lock Ring Tool Fuel Tank Repair Kit 5.31 to 7.17 Adjustable Lock Ring Spanner

  • Widely Fitment: This fuel pump removal tool Use for symmetrical holes type & 5 or 7 holes type fuel tank lid. (Check the type of the lock ring of your....
  • Adjutable Size: This fuel tank lock ring tool has a large adjustment range (5.83~7.83inch) which is suitable for different oil pump lock rings..
  • A MUST HAVE TOOL: This universal fuel pump removal tool will help tackle the job of replacing the fuel sender fast and effective without damaging the....
  • Intended Use: This fuel pump ring removal tool can easily remove and install lock ring on the fuel tank when servicing the fuel pump or fuel sending....
  • Applications: This fuel tank ring tool is suitable for vehicles to remove and install the fuel pump retaining ring that holds the fuel pump module on....
Check Stock

NEW HOLLEY SNIPER EFI MASTER KIT,800 CFM,BLACK,4BBL,FUEL INJECTION CONVERSION,MODULE,FUEL PUMP,RETURNLESS

  • Brand New Holley Sniper EFI Returnless Master Kit – Black Ceramic Finish Holley Sniper 4 Barrel Fuel Injection Conversion – Self-Tuning Master Kit plus Handheld EFI Monitor (Part #550-511D).
  • Are you waiting to convert your carbureted vehicle to Sniper EFI, but don’t like the idea of mounting an external fuel pump? Look no further. Introducing Sniper EFI Master Kits, with a Returnless Retrofit Fuel Module. This contains combines the Sniper EFI Self Learning Throttle Body, with an easy to install In-Tank Retrofit Returnless Module, 20 ft of Earl’s Vapor Guard Fuel Hose, and the required fittings..
  • The included fuel system places a 340LPH fuel pump in the tank, which can easily be accomplished with basic hand tools. The Drop-in Master kits make plumbing your Sniper EFI installation as hassle free as possible, simply cap the regulator on the sniper efi throttle body with the provided -6an cap, safely route the vapor guard fuel line along the chassis back to the diecast fuel hat, and the job is finished..
  • Note: This kit does not require a fuel return line, as the fuel pressure regulator is mounted in the tank..
Check Stock

ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum Carburetor Intake Manifold & Vacuum Test

  • DIAGNOSE YOUR VEHICLE: The ABN Car Vacuum and Fuel Pump Tester Gauge Kit – Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, & Vacuum Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts in fuel pumps and vacuum systems.
  • Set includes a variety of adapters suitable for most vehicles.
  • Intended for carburetor engines with a mechanical fuel pump operating pressures below 10 PSI (0.7 Bar).
  • 4-IN-1 KIT: 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
  • When reading the pressure gauge, occasional needle drop indicates that the carb or tappets need an adjustment plug, missing or stuck valve, or trouble in carburetor.
  • Steady, regular drop indicates that the valve is held open, burnt, or chipped.
  • Wide pressure fluctuation at high speeds indicates a weak valve spring.
  • Steady drop to zero pressure indicates a choked muffler.
  • EASY TO USE: Assembly and operating instruction manual included.
  • Pressure gauge has a 4-inch (10.2cm) diameter with color-coded measurement scales so it is easy to read and a 1.2-inch (3cm) thickness with rubber side notches for easy grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
Check Stock

FOXWELL NT530 for BMW Multi-System OBD2 Diagnostic Scanner Read Erase Error Codes

  • Upgraded version of the NT520 PRO scanner with improved hardware. Compatible with both OBDI and OBDII vehicles.
  • Service Features: Battery Reset, Injector Coding, TPMS, SRS, EPB, Brake Deactivation, Service Reset, Steering Angle Sensor (SAS) Calibration, DPF Regeneration, ABS Bleeding, BCM/SIR Setup, TPS/TBA (Throttle Body Alignment), etc..
  • Multi-System Diagnosis: Engine, Automatic Transmission, ABS, Airbag, Immobilizer, Climate Control, Fuel Pump Control Module, Fuel Injection Control Module, All-Wheel Drive Control, VG transfer case Module, Electronic Selector Module, Body Control Module, Digital Radio, Standard Radio, Drivers Door Module, HVAC, Instrument Cluster, Seat Memory Module, Theft Deterrent, Amplifier, Central Gateway, Immobilizer, etc..
  • Advanced functions such as Actuation, Adaption and Programming.
  • Expandable up to 5 car brands – Free Online Updates. One year warranty..
Check Stock

FOXWELL NT530 for Volvo Multi-System OBD2 Diagnostic Scanner Read Erase Error Codes

  • Upgraded version of the NT520 PRO scanner with improved hardware. Compatible with both OBDI and OBDII vehicles.
  • Service Features: Battery Reset, Injector Coding, TPMS, SRS, EPB, Brake Deactivation, Service Reset, Steering Angle Sensor (SAS) Calibration, DPF Regeneration, ABS Bleeding, BCM/SIR Setup, TPS/TBA (Throttle Body Alignment), etc..
  • Multi-System Diagnosis: Engine, Automatic Transmission, ABS, Airbag, Immobilizer, Climate Control, Fuel Pump Control Module, Fuel Injection Control Module, All-Wheel Drive Control, VG transfer case Module, Electronic Selector Module, Body Control Module, Digital Radio, Standard Radio, Drivers Door Module, HVAC, Instrument Cluster, Seat Memory Module, Theft Deterrent, Amplifier, Central Gateway, Immobilizer, etc..
  • Advanced functions such as Actuation, Adaption and Programming.
  • Expandable up to 5 car brands - Free Online Updates. One year warranty..
Check Stock

Diesel Engines Fuel Pump Drive Module PMD FSD with Relocation Kit For 1994-2004 Chevrolet & GMC Tahoe Suburban Savana Yukon C1500 C2500 K1500 Workhorse With 6.5L Replace 12562836 19209057 904-104

  • 【Compatible Replacement 】：The Fuel Pump Driver Control Module Relocation kit is especially designed for Chevy/GMC 6.5L Diesel Engines....
  • 【Fits for】：For Chevrolet Express 2500 3500 P30 Van Tahoe, GMC Savana Yukon G2500 G3500 P3500, Chevy/GMC C1500 C2500 C3500 K1500 K2500 K3500,....
  • 【Replaces Part#】: 12562836, 19209057, 904-104, 904-113.Effectively regulates voltage to the fuel pump..
  • 【Cost-effective】：Built to strict quality control standards, directly replace the old or damaged one.Professional manufacturing, superior....
  • 【Lifetime Warranty】 ： If the Fuel Pump Driver Control Module Relocation kit fails, cracks, stops working or any other problems, you can rely on....
Check Stock

Fuel Pump Assembly for Nissan Altima 2004-2006 2.5L 3.5L with California Emission

  • YHTAUTO Fuel Pump Module Meets OEM Specifications, Direct Replacement to Original Parts.
  • Fits Nissan Altima 2004-2006 l4 2.5L(QR25DE), 2006 V6 3.5L(VQ35DE)---with California Emission.
  • Package Included: Fuel Pump, Sending Unit, Float, Fuel Reservoir, Fuel Strainer.
  • Reference Number: E8660M, FG1783, P76174M, SP4065M, 17040ZD90A, 170408J020, F4671A, A33172, 69906, 23010247.
  • 1 year unlimited-mileage quality guarantee.
Check Stock

Electric Fuel Pump SP2007H for 1990-1996 Ford F150 F250 F350 1997 F-250 HD After Axle Tank Steel Tank 18 Gal Tank

  • 【Warranty】This fuel pump comes with 60 Days HASSLE-FREE RETURN & 1 Year / 12 months unlimited replacement promise. If you don't like it, just....
  • 【Interchange Part No.】SP2007H, F4TZ9A407C, F6TZ9A407CA, F6TZ9A407CC, PFB3..
  • 【Application】This fuel pump module assembly kit is especially designed for 1990-1996 Ford F-150 F-250 L6-4.9L & V8-5.0L & V8-5.8L.
  • 【Package】Includes Fuel Pump, Sending Unit, Float, Fuel Pressure Regulator, Fuel Strainer, Tank Seal and Wire Harness..
  • 【Compatibility】Please Check fitment for your vehicle Year/Make/Model on compatibility dropdown / chart. No modification necessary. Images depict....
Check Stock

ABN Fuel Injection Pressure Test Kit – Comprehensive Universal Set with Improved Flex Hoses, Fittings, and Instructions

  • TEST INJECTOR SYSTEM FUEL PUMPS: The new and improved ABN Comprehensive Universal Fuel Pressure Tester Master Fuel Pressure Gauge Kit is a complete fuel test gauge package that quickly tests the fuel pump pressure on injector systems.
  • NEW & IMPROVED: High-quality fuel pressure gauge hose replacements have been improved with implanted fiber.
  • Fitted with quick coupling system and pressure release valve fitting with long drain hose to prevent inadvertent discharge of fuel while testing and to allow for safe recovery of fuel.
  • Fuel injection pressure gauge displays reading 0-100 PSI and 0 to 7 Bar.
  • FITS YOUR VEHICLE: Automotive fuel pressure test kit adapters fuel gauge kit has all necessary fittings to attach to a pressurized system.
  • Will work on any vehicle as long as it has a Schrader test port fuel injection system or as long as you can splice an inline connection.
  • Recommended for older low-pressure systems with mechanical fuel pumps.
  • Not compatible with Bosch, CIS-Jetronic, or GM throttle body systems.
  • EASY STORAGE: Heavy-duty 2.3” x 12.8” x 11” inch (5.8cm x 32.5cm x 27.9cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization of each component of this fuel injection pressure kit.
Check Stock

Diesel Lift Pump Kit For 6.6L 12V Duramax Diesel 165GPH Lift Pump Filter Fit For Chevy GMC Duramax 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 - TSC10165G

  • ✔【Ideal Replacement】：Diesel Fuel Lift Pump System Kit Upgrade To Replace And Repair Damaged Kits, Eliminating Hidden Dangers To Safety, Lift Pump Module Will Wear Or Break Due To Mechanical Load Or Tensile Load Of Frequent Bending Force, We Recommend Timely Replacement， Each Part Is Factory Tested To Meet Or Exceed OEM Specifications, Give You A New Experience, Reduce Your Worries, Bring You A Relaxed And Cheerful Journey.
  • ✔【High Quality And Special】:TSC10165G Fuel Lift Pump Upgraded Version Is Made Of High Quality Metal And Rubber Materials, More Flexible And Wear-Resistant, High-Temperature Resistant, Corrosion Resistance, 2 Micron Filtration Rating, Effectively Removes Water, Air And Debris From Diesel Fuel.Improve Fuel Economy, Increase Injector And Fuel Injection Pump Life, And Increase Engine Torque Output. Either For Immediate Use Or As A Spare, Are A Better Replacement, Ready To Replace, Can Be Replaced With The Existing Hardware Integration Perfectly Matched To Give You Long-Term Stability And Good Performance.
  • ✔【Compatible With】: Fit For 2001-2010 Chevy Duramax 2001-20106.6L 12V | 2001-2010 GMC Duramax 6.6L 12V.
Check Stock