52 PC MINI SANDING CONE ENGINE PORTING ASSORTMENT KIT

  • CONE & CYLINDER SHAPED ABRASIVES REACH INTO TIGHT SPACES.
  • Contents: (10) 2 in. x 1/2 in. 80 grit cartridge rolls, (10) 2 in. x 1/2 in. 100 grit cartridge rolls, (20) 1-1/2 in. x 1/2 in. 80 grit cartridge rolls, (10) 1-1/2 in. x 1/2 in. 120 grit cartridge rolls.
Check Stock

3M Tri-M-ITE Wet Dry Polishing Abrasive Paper 400-8,000 A/O Assorted 6 Sheets (2E)

  • These WetorDry sheets are made of micron graded Aluminum Oxide minerals abrasives with soft cloth-like non-woven backing. Sheets provide consistent finish for High Quality Polishing of contours, interior cavities and shapes..
  • GREEN: Grit 400 GRAY: Grit 600 BLUE: Grit 1,200 PINK: Grit 4,000 MINT: Grit 6,000 GREEN (LIGHT): Grit 8,00.
Check Stock

Upgrade Kit for Work Sharp Guided Sharpening System WSSA0003300

  • Upgrade kit intended for use with the Work Sharp Guided Sharpening System (WSGSS sold separately).
  • Expand your Work Sharp Guided Sharpening System to repair damaged blades, sharpen a wider range of tools, or create the ultimate cutting edge!.
  • The Guided Sharpening System Upgrade Kit includes two additional Diamond Plates. Extra Coarse 220 grit diamond, and Extra Fine 800 grit diamond, and a Leather Stropping plate with honing compound..
  • The Diamond Plates and Leather Strop are 6" x 1.25" and are designed to fit the Guided Sharpening System.
  • 3 Year Warranty covers defects due to workmanship and design, excluding abrasives. Warranty covers consumer use only, not industrial or commercial use..
Check Stock

TUFF-Blast Neoprene Gloves for Sandblasting Sandblaster Sand Blast Cabinet - 7\ x 26\ Made in USA

  • 10-ft. hose draws abrasive from bucket or bag, leaving a satin finish ready for paint or further pre-treatment.
  • The siphon-feed spray gun is designed to deliver most abrasives including glass beads, aluminum oxide, steel grit, silicon carbide, walnut shells and more.
  • The versatile AT122601AV sand blaster can be used in craft work to etch glass and weather wood.
  • s designed to spray most abrasives including glass beads, aluminum oxide, steel grit, silicon carbide, walnut shells, and more.
  • Includes: Sandblast gun with ceramic nozzle, 10-Feet hose, steel pick-up tube and Allen wrench.
Check Stock

Work Sharp Knife & Tool Sharpener P220 Coarse Grit Replacement Belt Kit WSSA0002704

  • P80 Coarse grit replacement belts for WSKTS, WSKTS2. For tool grinding and sharpening.
  • For use with Work Sharp Knife and Tool Sharpener only.
  • Manufactured by Norton a leading brand in belt technology.
  • Abrasives: aluminum oxide (P80). Waterproof polyester backing..
  • Includes six (6) green P80 coarse grit belts..
Check Stock

Micro Mesh 9 Sanding Sheet Introductory Woodworkers Kit with a 2 inch by 3 inch Foam Sanding Block

  • Micro-Mesh is a unique cushioned abrasive that produces a very fine and uniform scratch pattern. The nine grades of abrasives range from 1500 grit to 12000 grit. The 1500 is similar in grit range to conventional 400 grit wet/dry sandpaper. The 12000 will leave a scratch pattern that cannot be detected by the human eye and produces a wonderful looking finish. Micro-Mesh abrasives can polish to a high reflective state or leave a matte or satin finish depending upon where you stop..
  • Before starting the Micro-Mesh cycle of abrasive sanding, coarse sanding should be done using up to 320 grit sandpaper. Shaping, sawing or turning of the work piece should be complete.Begin with 1500 Micro-Mesh. Sand until all of the sandpaper scratches are removed. Continue with the MICRO-MESH series and cycle up to the desired look (1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000). Thinned lemon oil or Danish oil can be applied as a finish on bare wood..
  • MicroMesh performs very well in conjunction with polyurethane, polyester, epoxy, lacquer and so on. Follow the manufacturer’s recommended cure times prior to re-coating or applying the finish coat. When you are applying multiple coats, sand from 1500 Micro-Mesh to 3200 or 3600 between coats to remove any orange-peel o....
Check Stock

Micro-Mesh Pen Sanding Kit

  • Includes 1500, 1800, 2400, 3200, 3500, 4000, 6000, 8000 and 12000 grit pads.
  • Last up to 15 times longer than normal abrasives.
Check Stock

Work Sharp WSGPS-W Pocket Knife Sharpener

  • Replacement Abrasive Belts for Work Sharp Professional Electric Knife Sharpener. Also Fits E5, E4, and E5-NH Sharpeners..
  • 6000 fine grit replacement belts for WSKTS, WSKTS2. For knife honing and maintenance..
  • For use with Work Sharp Knife and Tool Sharpener only.
  • Abrasives: Silicon Carbide (6000) with flexible cotton backing with polymer emulsion cushioning layer..
  • Includes six (6) purple micromesh 6000 grit belts..
Check Stock

Micro-Mesh 3 x 4 Soft Touch Pads

  • Pen, Bottle Stopper or even small goblet finishing just became a bit more enjoyable with the Micro-Mesh Soft Touch sanding pads! Start with the lowest grit of 1500 all the way up to 12000 grit..
  • This pack works extremely well when working with CA finishes leaving your work looking like it was done by a professional! Using the step up process will leave your project finish looking wonderful ..
  • The pack includes 9 each 3 inch by 4 inch soft touch pads in the following grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 plus a color coded grit guide..
  • Ideal for use with acrylics, plastics, resin or impregnated blanks when turning. Works great on automotive and marine body work. The pads can also be used around the home for fine repair work..
  • Pads are colored coded with foam backing for easy grit identification. Colors may vary from images shown here. The colors on the grit chart and the colors of Micro-Mesh abrasives may vary slightly due to color shifts in the manufacturing process..
Check Stock

3 x 4 Micro-Mesh TM Sanding Pads 9 Grits

  • Pen, Bottle Stopper or even small goblet finishing just became a bit more enjoyable with the Micro-Mesh Soft Touch sanding pads! Start with the lowest grit of 1500 all the way up to 12000 grit..
  • This pack works extremely well when working with CA finishes leaving your work looking like it was done by a professional! Using the step up process will leave your project finish looking wonderful ..
  • The pack includes 9 each 3 inch by 4 inch soft touch pads in the following grits: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 & 12000 plus a color coded grit guide..
  • Ideal for use with acrylics, plastics, resin or impregnated blanks when turning. Works great on automotive and marine body work. The pads can also be used around the home for fine repair work..
  • Pads are colored coded with foam backing for easy grit identification. Colors may vary from images shown here. The colors on the grit chart and the colors of Micro-Mesh abrasives may vary slightly due to color shifts in the manufacturing process..
Check Stock

1/2 X 10 Inch Coarse P80 Grit/Medium P320 Grit/Fine P800 Grit/Ultra Fine P5000 Grit Knife Sharpener Sanding Belts, 10 Pack Assortment (Compatible with Work Sharp WSCMB Combo Knife Sharpener)

  • 10 Pack contains: 2 coarse (P80) grit, 2 medium (P320) grit, 3 fine (P800) grit belts, and 3 ultra fine (P5000) grit belts..
  • Compatible with Work Sharp Combo (WSCMB) Knife Sharpener only..
  • Premium aluminum oxide (coarse, fine and ultra fine grit) and ceramic (medium grit) materials designed for knife sharpening and honing.
  • Flexible cloth backing | Premium Bi-directional tape joints.
  • We are the manufacturer! Factory Direct and built in USA by Red Label Abrasives. Guaranteed or Money Back..
Check Stock

Taytools 468433 Hollow Chisel Mortise 2-Piece Set of Diamond Sharpening Hones 200 and 600 Grit for Chisels Up To 1/2 Inch

  • Easily sharpen and maintain the edge on your hollow chisel mortice chisels with this 3 piece Mortise Chisel Sharpening Set..
  • Set includes 2 diamond abrasive cones, 220 and 600 grit..
  • Use the 220 grit cone to remove any nicks or burs and the 600 grit cone for final honing..
  • Diamond abrasives will hone the hardest of steels with ease..
Check Stock

Herm Sprenger Diamond Paste Bit Polish

  • ...000 Grit 0 to 1 Microns, 50,000 Grit 0 to 0,5 Microns and 100,000 Grit 0 to 0,25 Microns for Final Polish..
  • MADE IN USA: Forget other cheap polishing compounds! TechDiamondTools ultra precise, high strength polishing compounds ensure sustainable quality in any kind of application. Keep away from artificially colored abrasives. TechDiamondTools high-tech diamond compound has no color additives. It facilitates faster cutting and is safe for materials with high permeability..
  • USE OUR PRODUCTS AS: polishing compound, stropping compound, epoxy polishing paste, rock polishing compound, lapidary diamond paste, buffing compound, resin polishing, abrasive paste, metal polishing compound, granite compound. Use it both for manual and machine polishing. Best used with the wool buffs or leather strops..
  • SUITABLE FOR ANY SCENARIO: scratch genie, knife polishing compound, micron paste, mirror repair, glass watch scratch remover, watch polishing, crystal polishing, gun polishing, flattening, sharpening, knife sharpening, stock removal..
  • IDEAL FOR ALMOST ANY MATERIAL: glass, metal, ceramics, gemstone, marble, wood, steel, aluminum, granite, stainless, simichrome, rock, plastic, jewelers, brass, cerium, polyurethane, acrylic, rottenstone..
Check Stock