Best Abs Plastic Extrusion
SENRISE 100 X Transparent Shrink Wrap Film Bag Heat Seal Gift Packing for Homemade DIY Project Packaging Candle Jar Bath Bomb Gift 2235CM
- EXTRUSION SYSTEM: Gradient mixing type with high-speed energy saving design, extrusion blow moulding machine gradually changed screw with same distance and different deep. Material of screw: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2. Material of barrel: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥900,brittleness≤2..
- DIE HEAD: Head mode of plastic toy extrustion blow molding machine, the continuous extrusion head is designed with material center coming-in type and removing the plastic melting line on the product surface, easily for material or color change, saving the time & material cost with speedy operation..
- HYDRAULIC SYSTEM: The main hydraulic system of fully automatic precision plastic injection blow moulding machine is mainly composed of motor, pump, pressure regulating valve block, reversing valve blocks, cylinders and oil chillers. It controls platens open & close, carriage up & down, extrusion system up & down, blow pin actions, or even spinning cut and so on..
- ELECTRICAL CONTROL: The electrical control system of plastic small bottles blowing machine is composed of operation panel, temperature control module, PLC, input & output module, proportion board, contactors, voltage s....
Check StockInland 1.75mm ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Cardboard Spool (2.2 lbs) - Fits Most FDM/FFF Printers - Black
- ABS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Cardboard Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
- ABS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 240°C - 260°C (464°F - 500°F) Recommended Bed Temperature: 80°C - 110°C (176°F - 230°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
- INLAND ABS FILAMENT: Designed with the highest quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! ABS is made from durable thermoplastic and is utilized for prints that are frequently handled, dropped, or in may be stored in high temperatures such as phone cases, sport camera mounts, toys, tools, electrical enclosures etc..
- EASY-TO-USE: The Inland ABS filament melts evenly and feeds smoothly into your 3D Printer creating defined corners, creating a durable, strong print. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do....
Check StockInland 1.75mm ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Cardboard Spool (2.2 lbs) - Fits Most FDM/FFF Printers - Orange
- ABS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Cardboard Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
- ABS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 240°C - 260°C (464°F - 500°F) Recommended Bed Temperature: 80°C - 110°C (176°F - 230°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
- INLAND ABS FILAMENT: Designed with the highest quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! ABS is made from durable thermoplastic and is utilized for prints that are frequently handled, dropped, or in may be stored in high temperatures such as phone cases, sport camera mounts, toys, tools, electrical enclosures etc..
- EASY-TO-USE: The Inland ABS filament melts evenly and feeds smoothly into your 3D Printer creating defined corners, creating a durable, strong print. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do....
Check StockInland 1.75mm ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Cardboard Spool (2.2 lbs) - Fits Most FDM/FFF Printers - Green
- ABS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Cardboard Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
- ABS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 240°C - 260°C (464°F - 500°F) Recommended Bed Temperature: 80°C - 110°C (176°F - 230°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
- INLAND ABS FILAMENT: Designed with the highest quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! ABS is made from durable thermoplastic and is utilized for prints that are frequently handled, dropped, or in may be stored in high temperatures such as phone cases, sport camera mounts, toys, tools, electrical enclosures etc..
- EASY-TO-USE: The Inland ABS filament melts evenly and feeds smoothly into your 3D Printer creating defined corners, creating a durable, strong print. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do....
Check StockInland 1.75mm ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Cardboard Spool (2.2 lbs) - Fits Most FDM/FFF Printers - Blue
- ABS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Cardboard Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
- ABS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 240°C - 260°C (464°F - 500°F) Recommended Bed Temperature: 80°C - 110°C (176°F - 230°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
- INLAND ABS FILAMENT: Designed with the highest quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! ABS is made from durable thermoplastic and is utilized for prints that are frequently handled, dropped, or in may be stored in high temperatures such as phone cases, sport camera mounts, toys, tools, electrical enclosures etc..
- EASY-TO-USE: The Inland ABS filament melts evenly and feeds smoothly into your 3D Printer creating defined corners, creating a durable, strong print. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do....
Check StockSainSmart 1.75mm PVA Dissolvable 3D Printers Filament, Upgrade Water Soluble Support Filament for 3D Printers -0.5kg/1.1lbs (Natural), Dimensional Accuracy +/- 0.05mm
- Faster Dissolution Rate: PVA filament begins to dissolve after 1-2 minutes in water at 50°C..
- Creative Freedom: Sainsmart PVA filament provides stable support to complex designs, even those with features like cavities, and intricate internal details..
- Compatible with PLA: PVA is used in conjunction with PLA not ABS because it adheres well to PLA. The extrusion temperature difference can also be problematic with ABS..
- Printing Setting: Recommended Extrusion/Nozzle Temperature 190ºC- 210ºC (212ºF - 410ºF).
- Recommended bed Temperature 60ºC- 80ºC (140ºF - 176ºF)..
- Package: PVA 3D Printer Filament Vacuumed Sealed With Desiccant..
Check Stock2Pcs Rechargeable Headlights for Crocs, ABS Croc Accessories Kids Adults, Croc Lights, Croc Flashlight, Shoe Headlights Lights, Crock Lights, Clog Headlights, Glow in the Dark Croc Charm(White)
- 【Reusable 10000 Hours】Our rechargeable battery use environmentally friendly materials and are recyclable. It can be reusable for more than 10,000 hours, which is equivalent to buying 140 CR2032 batteries for croc lights.
- 【Small and Stable】 0.9-inch diameter, Weight 0.62 Ounce, U-shaped base design, Fit the shoes tightly, you can’t feel them when Outdoor activities, suitable for children over 4 years old and adult crocs.
- 【IPX5 Waterproof and Durable ABS Plastic】Silicone ring sealing interface, efficiently deal with rainstorm weather and the dew on the Grass when camping. Sturdy ABS Plastic Material anti-fall, anti-extrusion, high-temperature resistance.
- 【Upgraded hidden Switch】More fashionable, press on the head of the light to turn on/off and switch three different modes (Always Bright, Flashing, or Flashing slowly).
- 【Bright and Long-Lasting】 Much brighter than a phone flashlight, Light up 33 feet away, Can be used for 72 hours after fully charged.
Check StockABS 3D Printer Filament - 2.20 lb (1KG) The Diameter of 3.00 mm, Dimensional Accuracy ABS Multiple Color (Gray)
- 2.20 lbs ( 1.00 kg) Spool / 3.00 mm Dimensional Accuracy +/- 0.05mm Filament Diameter about 440 ft (135 m) / A wide range of colors available..
- Recommended Extrusion/Nozzle Temperature: 446°F - 518°F (230°C - 270°C), use with heated build platform is recommended..
- ABS Filament Features: Tough and Durable/ stand higher temperatures/ Little to no odor, a most commonly used thermoplastic material for 3D printing..
- Widely Application: ABS can be used for full functional models, and is the closest material to real production models. The 3D printed object will have a glossy type finish with ABS. Dimensions: 6.1 x 6.1 x 3.34 inch ( 155 x 155 x 85mm )..
- Premium Quality: Inland ABS 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided..
Check StockABS 3D Printer Filament - 2.20 lb (1KG) The Diameter of 3.00 mm, Dimensional Accuracy ABS Multiple Color (Purple)
- 2.20 lbs ( 1.00 kg) Spool / 3.00 mm Dimensional Accuracy +/- 0.05mm Filament Diameter about 440 ft (135 m) / A wide range of colors available..
- Recommended Extrusion/Nozzle Temperature: 446°F - 518°F (230°C - 270°C), use with heated build platform is recommended..
- ABS Filament Features: Tough and Durable/ stand higher temperatures/ Little to no odor, a most commonly used thermoplastic material for 3D printing..
- Widely Application: ABS can be used for full functional models, and is the closest material to real production models. The 3D printed object will have a glossy type finish with ABS. Dimensions: 6.1 x 6.1 x 3.34 inch ( 155 x 155 x 85mm )..
- Premium Quality: Inland ABS 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided..
Check StockABS 3D Printer Filament, Giantarm 1.75mm ABS Filament, 1KG Spool, White
- 【Strong and Durable 】ABS is a strong thermoplastic material,if you want to print a full functional model,that would be a good choice.ABS can create durable items that require a higher resistance to heat,and is the closest material to real production models..
- 【Practical 3D Printing Consumables 】Due to the hard nature of ABS, it is very suitable for printing accessories for daily use.
- 【Clog-Free, Bubble-Free & Easy-to-use】--- Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag. Recommended ABS Filament Extrusion/Nozzle Temperature 230-240℃, bed 85℃ ..
- 【Vacuum Packaging】Vacuum packaged with desiccant to maintain low level of moisture content. And keep it dry and keep out dust and foreign particles, prevent nozzle jams..
- 【100% Satisfaction Warranty】GIANTARM provides 100% Satisfaction Guarantee and Premium Customer Services with 24 hours guaranteed reply. If you are not satisfied with this filament, please kindly contact us at ANY TIME..
Check StockHATCHBOX ABS 3D Pen Filament, Dimensional Accuracy +/- 0.03mm, 1kg Total, 1.75mm, 16 Color Sample Pack
- Package Includes: 1 - Set of 16 HATCHBOX ABS Pen Filaments.
- See your ideas transformed into a real and rewarding reality with the HATCHBOX 1.75mm 3D Printing Pen ABS Filament Sample Mix, featuring a mixed set of 16 different filament colors. Our ABS filaments include: 10 of Hatchbox’s most popular ABS Color Filaments (black, blue, green, gold, orange, purple, red, silver, white and yellow), Glow-in-the-Dark Filament (blue, green) and Transparent Filament (black, white, red, blue). Made for both 3D printer pen and 3D printer use..
- ABS (Acrylonitrile Butadiene Styrene) 3D Printer Filament Vacuumed Sealed With Desiccant.
- 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm, 0.44lbs Total).
- Recommended Extrusion/Nozzle Temperature 210°C - 240°C (410°F - 464°F).
- Use With Heated Build Platform Is Recommended.
- New convenient tube packaging means your 3D filaments are ready to go as soon as you unwrap them. No more struggling with rolled up filaments curling in on themselves as you feed it into your 3D Printer or 3D Printing Pen..
Check StockGizmo Dorks ABS Filament for 3D Printers 1.75mm 200g 4 Color Pack - Blue Green Orange Red
- ABS (Acrylonitrile Butadiene Styrene) 3D printer filament vacuumed sealed with desiccant.
- Extrusion nozzle temperature: 225 - 250 C.
- Recommended to use a heated build platform.
- Net weight: 200 grams / Spool Diameter: 6" / Spool Width: 1.5" / Spool Hub Diameter: 2.25".
- ABS filament is compatible with various 3D printers such as the Monoprice Maker Select, Lulzbot, Flash Forge, and many more.
- Color pack contains 4 spools, each spool contains 200g of filament. Colors: Blue, Green, Orange, Red.
Check StockWallpaper Smoothing Tool Kit, Adhesive Wallpaper Install Tool Kit Include 2 Scrapers,Craft Knife with 5 Replacement Blades for Adhesive Contact Paper and Wallpaper Paste Applications
- [WALLPAPER SMOOTHING TOOL KIT]DURABLE MATERIAL: The scraper is made of durable plastic material and the craft knife is made of alloy steel with 5 alloy steel blades. Very easy to use..
- [WALLPAPER SMOOTHING TOOL KIT]SIZE: The blue scraper is 5.1inchX 3.14inch, and the red scraper is 7.67inchX 4.3inch.Precision cutting process knife.
- 5 additional blades can be replaced when the knife becomes dull..
- [WALLPAPER SMOOTHING TOOL KIT]ERGONOMIC DESIGNS: Blue extrusion tool with black felt design, large size red extrusion tool for human hand engineering design, very time and energy saving, very suitable for novice installers and professionals..
- [WALLPAPER SMOOTHING TOOL KIT]MULTIPLE USES: The red extrusion tool is perfect for large area applications, and the blue extrusion tool is suitable for applying seams, corners and edges to wallpaper, effectively smoothing wrinkles and bubbles to make the most of your wallpaper. Craft knife With replaceable 5 blade craft cutter, suitable for your different DIY home projects..
- [WALLPAPER SMOOTHING TOOL KIT]APPLICASION OCCASIONS: Wallpaper Smoothing Tool Kit is ideal for any home project, suitable for a variety of Wallpaper applications, vinyl stickers and glass films to make your project easier..
Check Stock