uxcell Standard Plastic Square Aluminum Extrusion End Cap Black 40x40mm 5pcs
- Package Content: 5pcs x Aluminum Profile End Cap, for 4040 EU Standard Aluminum Profile.
- Material and feature: tubing post end caps are made of ABS material, featuring durable construction and nice gliding edges, not subject to rust or corrosion.
- The cap made of plastic, No rust, better protection for the aluminum bar end, widely used in the climbing platform, fish tank rack, storage rack, shade house, trolley, and so on.
- Simply press in by hand then pin into the center bore with a small hammer or plastic mallet.
Check StockHealifty 1 Set/ 4 PCS Wheelchair Crutches Holder Cane Holder for Rollator/Wheelchair/Crutch
- Made of lightweight, durable ABS plastic, the cane holder weighs just 2oz.
- This is a cane holder for walkers, rollators, 3-wheelers, wheelchairs and round tubing.
- Quick start installation without tools?made of durable, unbreakable plastic..
Check StockRhinox Aquarium Airline Tubing Set, DIY CO2 Diffuser Kit, 6-Feet Airline Tubing, 2 Air Stones and Check Valves, 4 Connectors, 6 Suction Cups
- ... Airline Setup --- All-inclusive and ready to install, the Rhinox Aquarium Airline Tubing Set contains all the required parts needed to set up your air pump system. Each kit comes complete with high quality connectors and check valves, secure suction cups, two air stones and 6 feet of clear airline tubing..
- Flexible Plastic Tubing --- It is crucial that the airline tubing in your water pump system is made with a durable and reliable plastic material that is bendable. The 3/16” airline tubing from Rhinox is strong enough not to break under pressure, yet flexible enough to wrap around your aquarium equipment without getting snagged or affecting the air flow..
- Flexible Plastic Tubing --- All of the components of the Rhinox Aquarium Airline Tubing Set are designed to be compact and discreet to add very little distraction to your underwater environment. The airline tubing, suction cups, and connectors ar....
Check StockBOPai Drill Free Powerful Vacuum Suction Cup Towel Ring Shower Washcloth Hand Towel Round Holder
- REDEFINE THE CONVENIENT:BOPai Suction towel ring without having to drill and screws in the tile.Fast install and Convenient to relocat that placed your towel to anywhere you need..
- STRONG SUCTION ABILITY:This suction cup made by high quality silicone material that strong scalability with good air tightness.3-inches large Suction cup can bear 7.5 Pounds maximum.So it's easy to holder a towel sturdy even full of water.
- PREMIUM CHROME FINISH:ABS plastic material,5 layer coating material for Contemporary shiny chrome finish.Light weight but heavy duty engineering grade plastic..
- Measurement:Outside diameter 6¾ inches.Inside diameter 5¾ inches.The ring itself (tubing) is ½ inches.Normal distance from the wall 2inch.Tubing can rotate if you need..
- Use Introduction:Suction cup works on completed smooth surface(no rough concave convex).such as glass, stainless steel or mirror, ceramic tile, etc.and to overcome others non-smooth surface.we provided adhesive disc together.such as grout lines.rough tile.emulsioni paint.Just use disc first to overcome them..
Check StockOthmro ABS Model Rectangular Square Tubing, 5mm(0.2\) x 5mm(0.2\)× 0.5m(1.64 feet) Length White Plastic Hard Tube 10PCS
- 【FEATURE】-Model Square Tubing Measures 5mm(0.2") wide by 5mm(0.2") height by 1.64 feet total length. thin tube wall provide easier to shape when making models.
- 【High Quality material】- Square Tubing made in ABS material,It has good toughness and strength.
- 【Advantage】- this ABS Model Tubing can be bent in any angle you want to make in the model ,after heating ,it can be shape forever.
- 【EASY TO USE】- Cut the Model Tube's length you want and glue it with glue.
- 【APPLICATION】- Model Square Tubing is suitable for the sand table model building, scene and decoration's reconstruction and modification.
Check StockTITAN Vaper 22400 12.5A 120-Volt Heat Gun
- Ideal for plastic welding shrink tubing and paint stripping.
- 3 position rocker switch off, high, and low.
Check StockBach LT180S37 Stradivarius Bb Trumpet
- Bright Silver Finish -- Gold Brass Leadpipe w/ Nickel Silver Mouthpiece Receiver.
- .459" Bore -- 4 13/16" Seamless Yellow Brass Bell.
- Monel Pistons w/ Single Point Valve Guides -- Nickel Silver Outside Slide Tubing.
- 1ST Valve Slide Thumb Saddle -- Adjustable 3RD Valve Slide Ring -- Waterkeys on Main & 3RD Valve Slide.
- Includes Bach 7C Mouthpiece -- Includes Durable ABS Molded Plastic Case.
Check StockServetto ClosetPro Central Wall-Mounted Soft-Close Wardrobe Lift Expanding Steel Tubing with Black Plastic Housing, 22 lb Weight Rating (for 25 9/16\ - 45 1/4\), Made in Italy
- 1 (One) Servetto ClosetPro Central Wall-Mounted Soft-Close Wardrobe Lift Expanding Steel Tubing with Black Plastic Housing, 22 lb Weight rating (For 25 9/16" - 45 1/4"), Made in Italy.
- PRODUCT DIMENSIONS: Height 33" (840 mm). Adjustable 25 9/16" - 45 1/4". Material: ABS/Aluminum.
- USEFUL ADDITION TO ANY CLOSET: Polished Chrome Soft-close Expanding Wardrobe Lift.
- DURABLE AND LONG LASTING: Constructed of abs/aluminum structural steel with plastic housing and handle. Rated for a weight capacity for up to 22 pounds.
- INCLUDES: Mounting hardware and Installation Instructions.
Check StockWoder WD-10K-ADV-JG Ultra High Capacity Inline Water Filter with ¼” John Guest Fittings - WQA Certified 10,000gal – Removes Chlorine, Lead, Chromium 6, Heavy Metals, Odors/Contaminants – USA Made
- MADE IN THE USA - NO PLUMBING REQUIRED – Comes with 2 John Guest quick connect fittings on both sides. Fits all 1/4″ plastic flex tubing and flexible Copper tubing, used for water supply to ice makers, refrigerators, etc. (1/4” JG also fits the 1/8″ PEX TUBING as its O.D. is the same as 1/4” tubing.) DOES NOT FIT BRAIDED HOSES..
- MADE IN THE USA - NO PLUMBING REQUIRED – Comes with 2 John Guest quick connect fittings on both sides. Fits all 1/4″ plastic flex tubing and flexible Copper tubing, used for water supply to ice makers, refrigerators, etc. (1/4” JG also fits the....
Check StockTaylor Made Products 1139 Pontoon Boat Rail Fender Hanger / Adjuster Pack of 4
- Designed to fit both 1.25" and 1” square tube rails on pontoon boats.
- Clamps securely to square tubing yet can be repositioned quickly and easily.
- Allows for simple height adjustment of fenders.
Check StockCane Holder for Walker - Universal Walking Stick Holder Accessories for Rolling Walker Rollator (2pcs/Set)
- Top ABS Quality: this cane holder made of lightweight, durable ABS plastic, very good walker accessories for seniors.
- Large Load Capacity: this rollator walker accessories can load capacity up to 3.8lbs, so you do not worry to load any your crutch, walking canes, or walkers for seniors with seat.
- Fit Most Cane/Walker Size: this cane holder fit for almost any walkers, rollators, 3-wheelers, wheelchairs and any round tubing.
- Easy to Install and Use: quick installation without any tools.
- only need to push your walker into the mouth, then it will stuck your walking stick very tightly.
- Do not use both at the same time. Just use one at a time, and the other as a backup.
Check StockGeneral Tools Hose and Tubing Cutter #115 - Cuts up to 2 Inch Flexible Rubber, PVC, ABS and Polyethylene Tubing
- CUTS RUBBER TUBING: Cuts up to 2-inch rubber hose or tube..
- CUT PE OR ABS PIPE: Cuts up to 1-1/2 inch PE and ABS pipe..
- CUTS PVC PIPE: Cuts up to 1-1/4 inch PVC pipe..
- HOLDS TIGHT: The curved holder supports the hose or tubing during square cuts..
- LONG HANDLES: Long handles for added leverage..
Check StockEFIELD 3/8\ - 1\ Pex Pipe and Plastic Pipe Cutter
- EFIELD Pipe and Plastic cutter has a unique shaped blade which gives piping a Clean Cut, No Burrs.
- EFIELD Pipe and Plastic cutter Cuts any Size up to 1-Inch (This includes sizes from 1/8"-1").
- EFIELD Pipe and Plastic cutter has Easy locking handle to safely store Pex Pipe Cutter.
- EFIELD Pipe and Plastic cutter SHOULD NOT be used to cut: Metal Pipes, Cable Wires, and PVC Tubing.
- EFIELD Pipe and Plastic Cutter Works with Pex-Tubing and Nylon-Tubing..
Check Stock