Camco 55183 18' RV Power Grip And Electric Adapter
- ...ge protection for 12V DC outlets prevent dead car batteries or enable a deep draw on dual batteries.
- Simple to Transport: (2) wheels and an extendable aluminum handle allow you to roll the cooler.
- Includes: (1) 7-foot A/C adapter and (1) 11-foot 12/24V cigarette lighter plug adapter.
- Drain Plugs: (2) drain plugs (one in each compartment) release excess water for easy clean up.
- Dimensions: 32 ½-inches (W) x 21 1/8-inches (D) x 18 7/32-inches (H).
- Durable Construction: Made of a durable polymer with reinforced exterior corners.
Check StockHonoson 2 Pieces Stainless Steel Drain Snap Plug Boat Drain Plug for Drains 1 Inch
- What you will get: there are 2 pieces of stainless steel drain snap plugs in the package for you, which are mainly silver and black.
- Serviceable material: these boat drain plugs are made of quality stainless steel and rubber, not easy to break or deform, corrosion-resistant, strong....
- Size information: each of the drain snap plugs measures approx. 10 x 4 x 3 cm/ 3.9 x 1.6 x 1.2 inches, and the diameter of the plug is about 1 inch,....
- Easy to operate: with adjustable rotating torque, the stainless steel snap handle drain plugs are easy to handle and operate, you just need to install....
- Applicable occasions: these boat drain plugs can be widely applied in many places, such as the bottom hatch, lifeboat, breakwater and so on, which....
Check Stock
Threan 2 Pieces Brass Snap Handle Drain Plug Boat Drain Plug Brass Handle Rubber Plug for 1 Inch Diameter Drains
- Package contents: there are 2 pieces of brass snap handle drain plugs in the package for you.
- These snap handle drain plugs are enough for your daily use, they can be nice helpers for your work.
- Quality material: these boat drain plugs are made of quality rubber and brass, strong and durable, anti-rust and colorfast.
- They adopt the cam styles, making it easier for your operation, and you can use them to get a tight and long lasting effect, so they can serve you for a long time.
- Measurement and weight: the snap handle drain plugs measure approx. 10 x 4 x 3 cm/ 3.9 x 1.6 x 1 inches, and the diameter of the plug is about 1 inch.
- Simple operation: the brass snap handle drain plugs are suitable for 1-inch holes.
- With adjustable rotating torque, you just need to install them from the internal beam, you can finish installing them in a few minutes.
- Applicable occasions: the boat drain plugs can be applied in many places, such as lifeboat, the bottom hatch, breakwater and so on, nice to bring convenience for your work and life.
Check Stock2-Pack of Beast Cooler Accessories Designed Replacement Drain Plugs for All Yeti Tundra Coolers - Specifically Designed for and Compatible with All YETI Hard Coolers
- COMPATIBILITY: Our Yeti Compatible Drain Plugs Are An Ergonomically Improved Twist Drain Plug (Black - 2 Pack) Is An Improved Design That Fits....
- DESIGN: Our Unique, US Patented Design Will Fit ALL Yeti Roadie, Yeti Tundra Coolers, and theYeti TANK . It DRASTICALLY Improves the Ability to Easily....
- DURABLE CONSTRUCTION: The Leak-Proof, Rugged Drain Plugs Allow Your Cooler to Drain While Only Partially Open. An Ergonomically Improved Twist Drain....
- EASY TO USE: The BEAST Replacement Drain Plugs Improved Finger Knob Design Allows for MUCH Easier Finger Leverage to Open and Close the Drain..
- GREAT REPLACEMENT: Our Yeti Compatible Plugs Come in a 2-Pack so You Will Always Have a Backup Plug..
Check StockSuburban Mfg # 6259Apw 10Gal Suburban Door Polar
- Useful RV water heater tool kit, contains 1 wrench, 4 drain plugs and 1 PTFE tape..
- Special angled design wrench, helps you reach tight places and rotate drain plugs. Suitable for 15/16 inch and 7/8 inch..
- 1/2” NPT water heater drain plugs fit for most RV water heater..
- Wrench prongs for rusted drain valves and petcock drains..
Check Stock
showingo 2 Pack Cooler Drain Plugs for YETI Cooler Accessories, Large & Small Drain Plug Cooler Plug Also Compatible with RTIC Coolers
- Compatibility - Cooler Drain Plug Fit for Yeti Coolers and Also Compatible with RTIC coolers.
- Cooler Drain Plug Kit Includes 1 Large Screw-On Gasket Replacement Coolers and 1 Replacement Small Cooler Drain Plug with Leak-Proof Design for 20QT, 45QT, 60QT Coolers.
- Cooler drain plugs with leak-proof design replace your old or broken cooler drain plug perfectly. If the threads on the drain plug get worn out and it’s no longer as airtight as it used to be, perfect cooler replacement parts for RTIC Coolers.
- Replacement drain plugs are easy to open and close to drain your cooler water, durable and good for easy draining. The screw-in gasket drain plug is easy to use and keeps your cooler leak proof and rugged. When partially open, the drain plug allows you to drain cooler without completely removing the plug..
- Easy to Use.These replacement drain plugs can drain the cooler water while drain plug is partially open. Simply unscrew the drain plug, pull it out, tilt your cooler, and let the water out. Tighten the cooler drain plug is good for keeping your coolers cold..
Check Stock
2 Pack Cooler Drain Plug for Yeti Cooler Plug Replacement Accessories for Yeti, Cooler Wheels Compatible with Most Rotomolded Coolers Including Most Major Brands Drain Plugs with Leak-Proof Design
- 【Compatibility】Drain Plugs for Yeti Are An Ergonomically Improved Twist Drain Plug, Is An Improved Design That Specifically Fits With Cooler Plug with Yeti Line of Roadie, Tundra, and TANK Ice Buckets and RTIC coolers (This is Non-Original Aftermarket Parts).
- 【Perfect Size】This package contains 2 Pack high visibility cooler drain plugs, and each size is approx. 4.57cm/ 1.8 inch in length and approx. 2.79 cm/ 1.1 inch in width, An Oversized Drain Plug on One Side of the Cooler to Allow Faster and Easier Draining..
- 【Easy to Use】Screws right in, seals tight without any leaking issues. Easy to use these replacement drain plugs to drain the cooler water while drain plug is partially open,Tighten the leak-proof drain plug is good for prevent the cold loss from your Coolers..
- 【High Quality Material】Cooler Plug Replacement for Yeti with Premium Quality, The drain plug is made of 2 parts, the collar is made of silicone, and the plug is made of quality ABS plastic, which is very strong and leak-proof, and can be applied for a long time..
Check StockOTC 5961 Drain Plug Pro Tool Kit
- Includes attachments for standard drain plugs, low profile drain plugs, internal hex drain plugs (17mm) and 1/4 inch hex bits.
- Use with any 1/4 inch square drive socket in your tool box.
- The flexible shank with 1/4 inch square drive helps remove or thread smaller fasteners even in hard to reach places.
- Contained on a handy socket rail for hanging or tool drawer storage.
Check Stock
2 Pack Drain Plugs for RTIC Coolers, Large & Small Cooler Drain Plugs Compatible with RTIC 20QT, 45QT, 65QT Coolers with New Two Drains
- Compatible with -- RTIC replacement plugs used in the "Dual Drain Plug System". The large & small cooler drain plugs fit for RTIC 20QT, 45QT, 65QT new coolers with 2 drainage holes..
- Good Design -- The screw-in gasket drain plug improved finger knob design which are easy to open and close to drain your cooler water. When partially open, the drain plug allows you to drain cooler without completely removing the plug..
- Easy to Use -- These replacement drain plugs can drain the cooler water while drain plug is partially open. Simply unscrew the drain plug, pull it out, tilt your cooler, and let the water out. Tighten the cooler drain plug is good for keeping your coolers cold..
- Package Included -- The cooler drain plug kit include 1pc large screw-in gasket cooler drain plug replacement for RTIC coolers and 1pc small cooler drain plug with leak-proof design replacement for RTIC 20QT, 45QT, 65QT Coolers..
- Satisfaction Guarantee -- We care for all customer's feeling. If this product does not meet your expectations, please send it back for a 100% refund or contact us directly....
Check StockECO-PLUG - Oil Drain Plug for UNDAMAGED Aluminum Oil Pan Thread Size 14mm X 1.50
- The Revolutionary Threadless, Magnetic, Life Time, Leakproof, Oil Pansaver, Motor Oil Drain Plug..
- Eco-Plug Hand Installs Magnetically In Seconds & Removes Safely With Vice Grips..
- To Expedite Every Oil Change Service. The Future Of Motor Oil Drain Plugs Has Arrived!.
- Eco-Plug Is Guaranteed To Outperform Over Size / Butterfly / Threaded Drain Plugs / Helicoils / Timeserts / Quick Valves..
- Stop Threading Drain Plugs That Damage Oil Pan Threads & Leak Oil. Go Threadless, Go Magnetic, Go Ecoplug.
Check StockECO-PLUG - Oil Drain Plug for UNDAMAGED Aluminum Oil Pan Thread Size 12mm X 1.75
- The Revolutionary Threadless, Magnetic, Life Time, Leakproof, Oil Pansaver, Motor Oil Drain Plug..
- Eco-Plug Hand Installs Magnetically In Seconds & Removes Safely With Vice Grips..
- To Expedite Every Oil Change Service. The Future Of Motor Oil Drain Plugs Has Arrived!.
- Eco-Plug Is Guaranteed To Outperform Over Size / Butterfly / Threaded Drain Plugs / Helicoils / Timeserts / Quick Valves..
- Stop Threading Drain Plugs That Damage Oil Pan Threads & Leak Oil. Go Threadless, Go Magnetic, Go Ecoplug.
Check StockRVMATE RV Water Heater Drain Plug Kit, Include Angled Wrench, 4 Pieces 1/2\ NPT Replacement Plugs and 1 roll PTFE Tape
- Useful RV water heater tool kit, contains 1 wrench, 4 drain plugs and 1 PTFE tape..
- Special angled design wrench, helps you reach tight places and rotate drain plugs. Suitable for 15/16 inch and 7/8 inch..
- 1/2” NPT water heater drain plugs fit for most RV water heater..
- Wrench prongs for rusted drain valves and petcock drains..
Check Stock
AIEVE Drain Plug Hose Connection for YETI Cooler, Cooler Drain Plug Replacement for YETI, Cooler Plug Replacement for YETI Chest, Cooler Accessories for YETI Tundra Cooler, Roadie Cooler, Tank Cooler
- AIEVE cooler drain plugs for yeti cooloer with leak-proof design replace your old or broken cooler drain plugs perfectly, use with most standard hoses to drain your YETI coolers easily, allows you to drain your YETI Cooler with a garden hose without removing it.
- This cooler drain plug replacement for YETI coolers is easy to open and close to drain your cooler water, durable and provides a secure connection for easy draining, no long need to pull cooler out your truck to drain water, effective and ice melts eventually.
- Cooler plug replacement for yeti cooler fit most standard hoses to drain the cooler water easily while drain plug is partially open, garden hose drain plug connector for coolers, connect a standard garden hose, and drain all the way down at the end of the driveway, instead of pooling a big old puddle of cold water into your garage.
- Tighten the replacement cooler plug and keep your YETI Tundra coolers cold, when not in use, simply attach the provided cap as a leak-proof plug and drain your YETI coolers easily without lifting a finger, no need to drag the ice chest to the end of the tailgate to drain and the wat....
Check Stock
