Categories

Best Ac Vibration Isolator

Rubber Cylindrical Vibration Isolator Mount with 2 Threaded Studs, Inch Size,3.15\Diameter, 1.97” Height, M12 Thread for Pump,Generator,Engine,Compressor, Motors,etc.

  • 【Metric System】 Since the stud size of this product ls metric units when assembling the nut to the stud of this product,be sure to use M12 nut(M12xP1.75),not inch nut..
  • 【Quality】 100% Virgin natural rubber is used in the production process..
  • 【Used for multipurpose】Vibration Isolator is used for vast fields such as garage door opener,pump,blower,engine, generator,motor,fans,compressor, and more.
  • 【Vibration absorption】Vibration Absorption Vibration Isolator significantly reduced unwanted vibrations and noise transmitted to living environment..
  • 【Big size】 Male thread size : M12 x 27mm (D x L).
  • Rubber size : 80mm x 50mm / 3.15" x1.97"(D*H).
Check Stock

Dual Battery Isolator Kit - 12 Volt 140 Amp Voltage Sensitive Relay - Complete VSR Double Battery Automatic Charger - Fits Trucks, ATV, SUV, UTV Boats and more - Safe, Water and Vibration Resistant

  • ... Premium Rugged Construction - This dual battery isolator kit is all you need to charge a dual battery system. It features a voltage sensitive chip ensuring your primary battery is always ready for your vehicle to run. This dual battery isolator is also built to withstand extreme weather environments, vibration and is water resistant..
  • Lifetime Warranty - This 12V 140 Amp dual battery isolator kit comes complete with a lifetime warranty. If the part ever fails on your Truck, SUV, RV, ATV, UTV or Boat simply contact us for a replacement. Avoid getting stucked after your recreation by purchasing this dual battery isolator kit from AA Ignition..
Check Stock

Battery Isolator Kit 12V 140AMP Dual Battery Smart Isolator Manual/Auto Modes with Voltmeter for Vans Truck ATV UTV RV Boat-22FT Wiring Cable 3PCS Battery Terminals Included

  • 【SAFE&EFFICIENT】: The dual battery isolator efficiently manages and protects power, preventing over-discharge of the main battery and ensuring full charging of the second battery. With high-quality materials and an IP68 waterproof, dustproof, and vibration-proof construction, our battery isolator delivers reliable performance even in harsh environments..
  • 【EASY INSTALLATION】The FUBOCH dual battery isolator kit is easy to install in cars, trucks, boats, RVs, and so on. It includes all the necessary accessories for a quick installation. Upgrade to a dual battery system and power multiple devices with ease using the battery isolator kit..
  • 【QUALITY GUARANTEE】This 12V dual battery isolator kit comes with a 12-month warranty and a 30-day money-back guarantee, providing reliable and efficient performance for your vehicle or boat, and allowing you to purchase with confidence..
Check Stock

Rubber Mounts M6 M8 Cylindrical Rubber Isolator Mounts Shock Absorber Anti Vibration Mount 1/4 Shock Absorption Mount w/Threaded Stud Vibration Isolator Silentblock Car Boat Bobbins, M6 Pack of 4

  • Deflection range: 0.05 in to 0.20 in, Lower Rod penetration: 1 1/4 in, Max. rod dia., 3/8 in.
  • LDS (low dynamic stiffness) rubber hanger vibration isolator helps reduce noise transmission and vibration from equipment, running over 1000 rpm.
  • General purpose double deflection for ceiling-suspended mechanical equipment and pipping. Double deflection LDS rubber element with projecting bushing helps steel to steel contact.
  • Package included: 2 x Hanger mount vibration isolator. Color Mark: Green.
Check Stock

Mr. Gasket 6279 Truck Mounted Battery Installation Kit

  • RUGGED DURABILITY -This dual battery isolator kit is all you need to charge a dual battery system. It features a voltage sensitive chip ensuring your primary battery is always ready for your vehicle to run. This dual battery isolator is also built to withstand extreme weather environments, vibration and is water resistant..
  • EASY TO INSTALL - No alternator or ignition connection needed,You don't need any additional components to complete installation as everything is included in the kit, including leads, connectors, screws, zip ties, and more..
  • VOLTAGE SENSITIVE RELAY - The Automatic 140 Amp Dual Battery Isolator is all you need to charge Two Battery Systems. Voltage Sensitive Relay (VSR) cuts in at 13.3 volts and cuts out at 12.8 volts to ensure your primary battery is always charged and ready to start your vehicle. It's like having two separate power sources for each battery while only having one alternator!.
  • FITS A WIDE VARIETY OF VEHICLES - This Dual Battery Isolator Kit with Printed Installation Instruction Manual Gives You the Power for Your Recreation Without Needing to Worry About Getting Home After.12V, 140A, 13.3V cut-in voltage, 12.8V Cut-out Voltage, Suitable for 12V 4WD, Marine, Truck, Caravan & Camping Applications..
Check Stock

Floor Vibration Isolator, 190 to 380 lb.

  • Isolator Type: Neoprene, Item: Floor Mount Vibration Isolator, Dimension BC: 3".
Check Stock

Hahiyo M10x27mm Rubber Isolator Mounts Cylindrical Anti-Vibration Haplopore Absorber Shock Not Slip Nuts Make Sleep Quite Not Feel Floor Shock for Engine Tractor Pump Compressor Garage Motor 1pcs

  • Help lessen vibration immensely.Reduce the vibration which transmits through the ceiling.If a lot of vibration from the fan in the basement through the floor joists to the kitchen is messing up something on the microwave,you can use these rubber isolator mounts to dampen the considerable vibrations.Will eliminate the sound or vibrations from split type outside compressor through block wall nearly..
  • Make you sleep peacefully.Night and day reduction in noise.Put these on garage door opener,which is right under your bedroom.It will greatly reduce the sound of the garage opening and closing,no longer wakes someone up sleeping above the garage.Also can lower the decibel level by half.It's so much quieter and the floor vibration is hardly feel that doesn't generally bring your attention to it..
  • True isolation.A top bolt,and a bottom bolt physically isolated from each other by an internal layer of rubber.These rubber isolator mounts can do what simple"isolation pads and a through-bolt"cannot do.They will work very well in isolating a noisy fuel pump from the frame mounting..
  • Keep tightly.The mounts will not squat down squishing the rubber thereby causing the chain to slip off making it too loose.The simple geometric design supports the dynamic performance and ....
Check Stock

Kemimoto Dual Battery Smart Isolator Kit, 12V 140Amp Voltage Sensitive Relay VSR & Digital Double Voltmeter Monitor & Wiring Cable Kit, Battery Automatic Charger for UTV ATV RV Car Truck Marine Boat

  • ...attery Terminal --Connecting a load or charger.
  • 3 Female Spade Connectors and 10 Cable Ties..
  • 【Easy Installation】This 12V dual Battery Isolator is featured with waterproof, dustproof, and vibration-proof construction. This kit is easy installation with complete and convenient accessories, providing reliable and efficient performance for your vehicle or boat..
Check Stock

4 Pack of Anti Vibration Pads 4\ x 4\ x 3/8\ All Rubber Vibration isolation pads

  • Rubber Mounts Dimensions - Thread size M6*18mm / 0.24" x 0.71".
  • Application - As a damping element for welding machine and other equipment for vibration, shock and noise control.
  • Compact & Stable - Made of Natural rubber and steel.
  • Simple geometrical design supports dynamic performance and stability under lateral (sideways) forces.
  • Damping Element - Protect the body's normal work and get good surroundings, damping noise reduction and the effect is obvious.
  • In the radio equipment, instruments, protect machine vibration interference, having a good buffer.
  • Suitable For - This rubber isolator mounts mainly used for air compressors, diesel engines, gasoline engines, water pumps, office facilities, aviation, construction, automobile, etc.
Check Stock

Isolate IT Lavalier Microphone Isolation Shield System for Sanken COS-11 (Black)

  • FOR LAVALIER MICROPHONES: This lightweight mic isolator is designed to fit Sanken COS-11 lavalier microphones. To install, insert the lavalier wire while flexing the isolator open and then slide the microphone down into the cavity..
  • COMPACT ISOLATION: This isolation device is made with a Sorbothane lining that can absorb up to 94.7% of vibration noise and energy while in use. This mic isolator can also reduce noise from mic hits, rustling clothes, and other unwanted sounds..
  • SAFE TO USE: These heavy-duty isolators are safe to use on all materials and can be attached directly to the skin. To fix onto fabric, skin, or other materials, attach the isolator to an adhesive, like a sticky piece of tape, to ensure a sturdy hold..
  • OPTIMAL SOUND QUALITY: Thanks to its slim, contoured design, this miniature mic isolation adapter can provide crisp, quality audio when attached to all types of garments and between layers of clothing..
  • PROFESSIONAL AUDIO RECORDING: This portable lav filter can be used to provide high-quality sound for an interviewer, reporter, broadcaster, presenter, podcaster, and anyone else in a field that requires up-close, quality sound..
Check Stock

Floor Mount Vibration Isolator, 100% Neoprene, Capacity Range: 15 to 45 lb.

  • 0.20" to 0.40" deflection, Oil-resistant.
  • Cap screw Dia. and length M10 x 30mm, Includes top bolts and washers.
  • Neoprene floor-mount vibration isolator provides more deflection than isolation pads.
  • This thicker, taller isolator with neoprene bottom helps eliminate the need to bot to the floor.
Check Stock

DNA Motoring LEPOW-010 Aluminum Battery Box Relocation Kit 13.5\W x 9.5\D x 10\H

  • 【Easy installation and waterproof】 No need for alternator or ignition connection. After installation, it can still be used normally even if it is affected by vibration, various bad weather and other factors. At the same time, the isolator supports waterproof function, and the waterproof grade is IP67. (Only suitable for lead-acid battery to lead-acid battery or lithium battery to lithium battery).
  • 【Manual Modes】 Press and hold the "Power" button for 3 seconds, the upper blue (LED) indicator light is on, and the manual mode is turned on. In this mode, click the "Power" button to turn on/off the isolator. Click the "power" button, the lower red (LED) indicator light is on, and the isolator is turned on.
  • click the "power" button again, the lower red (LED) indicator light is off, and the isolator closure..
  • 【Automatic Mode】Long press the "Power" button for 3 seconds, the upper blue (LED) indicator light goes out, and the automatic mode is turned on. In automatic mode, the voltage-sensitive relay (VSR) cuts in at 13.3 volts, and the lower red (LED) indicator lights up. The voltage-sensitive relay (VSR) is cut off at 12.8 volts, and the lower red (LED) indicator light turns off.
  • 【LED SCREEN REAL-TIME VOLTAGE DISPLAY】 The surface of the isolator....
Check Stock

LANIAKEA 8 Pack Anti-Vibration Air Conditioner Mounting Bracket Shock-Proof Pads Supports Up to 1000 lbs/4 PCS, Heavy Duty Shock-Proof Pads Mounts

  • Package Include: 8 pack Rubber Vibration Isolator Mounting Bracket with stud and galvanized nut..
  • Size: Base: 4.3’’x1.9’’/11x5cm, Height: 2.4’’/ 6cm. Anti-slip bottom rubbers pads. It supports up to 1000 pounds for all 4 pcs..
  • Easy to Install: Just put the screws through AC units legs holes and then fasten the nuts..
  • Heavy Duty: Made of Hard TPU rubber, durable and strong, provides sturdy support for air conditioner..
  • Fit most of Mini Split Air Conditioner Condenser. It’s designed for heavy duty indoor or outdoor use..
Check Stock